Re: [PATCH 23/29] vfio-mediated-device.txt: standardize document format

From: Kirti Wankhede
Date: Mon May 22 2017 - 15:39:27 EST

Next message: Florian Fainelli: "Re: [PATCH net-next 19/20] net: dsa: add MDB notifier"
Previous message: Florian Fainelli: "Re: [PATCH net-next 18/20] net: dsa: add FDB notifier"
In reply to: Mauro Carvalho Chehab: "[PATCH 23/29] vfio-mediated-device.txt: standardize document format"
Next in thread: Mauro Carvalho Chehab: "[PATCH 13/29] SAK.txt: standardize document format"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 5/19/2017 6:56 AM, Mauro Carvalho Chehab wrote:
> Each text file under Documentation follows a different
> format. Some doesn't even have titles!
>
> In this specific document, the title, copyright and authorship
> are added as if it were a C file!
>
> Change its representation to follow the adopted standard,
> using ReST markups for it to be parseable by Sphinx:
> - convert document preambule to the proper format;
> - mark literal blocks;
> - adjust identation;
> - use numbered lists for references.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>

Looks good to me.

Reviewed by: Kirti Wankhede <kwankhede@xxxxxxxxxx>

Thanks,
Kirti

> ---
> Documentation/vfio-mediated-device.txt | 252 +++++++++++++++++----------------
> 1 file changed, 130 insertions(+), 122 deletions(-)
>
> diff --git a/Documentation/vfio-mediated-device.txt b/Documentation/vfio-mediated-device.txt
> index e5e57b40f8af..1b3950346532 100644
> --- a/Documentation/vfio-mediated-device.txt
> +++ b/Documentation/vfio-mediated-device.txt
> @@ -1,14 +1,17 @@
> -/*
> - * VFIO Mediated devices
> - *
> - * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
> - * Author: Neo Jia <cjia@xxxxxxxxxx>
> - * Kirti Wankhede <kwankhede@xxxxxxxxxx>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> +.. include:: <isonum.txt>
> +
> +=====================
> +VFIO Mediated devices
> +=====================
> +
> +:Copyright: |copy| 2016, NVIDIA CORPORATION. All rights reserved.
> +:Author: Neo Jia <cjia@xxxxxxxxxx>
> +:Author: Kirti Wankhede <kwankhede@xxxxxxxxxx>
> +
> +This program is free software; you can redistribute it and/or modify
> +it under the terms of the GNU General Public License version 2 as
> +published by the Free Software Foundation.
> +
>
> Virtual Function I/O (VFIO) Mediated devices[1]
> ===============================================
> @@ -42,7 +45,7 @@ removes it from a VFIO group.
>
> The following high-level block diagram shows the main components and interfaces
> in the VFIO mediated driver framework. The diagram shows NVIDIA, Intel, and IBM
> -devices as examples, as these devices are the first devices to use this module.
> +devices as examples, as these devices are the first devices to use this module::
>
> +---------------+
> | |
> @@ -91,7 +94,7 @@ Registration Interface for a Mediated Bus Driver
> ------------------------------------------------
>
> The registration interface for a mediated bus driver provides the following
> -structure to represent a mediated device's driver:
> +structure to represent a mediated device's driver::
>
> /*
> * struct mdev_driver [2] - Mediated device's driver
> @@ -110,14 +113,14 @@ structure to represent a mediated device's driver:
> A mediated bus driver for mdev should use this structure in the function calls
> to register and unregister itself with the core driver:
>
> -* Register:
> +* Register::
>
> - extern int mdev_register_driver(struct mdev_driver *drv,
> + extern int mdev_register_driver(struct mdev_driver *drv,
> struct module *owner);
>
> -* Unregister:
> +* Unregister::
>
> - extern void mdev_unregister_driver(struct mdev_driver *drv);
> + extern void mdev_unregister_driver(struct mdev_driver *drv);
>
> The mediated bus driver is responsible for adding mediated devices to the VFIO
> group when devices are bound to the driver and removing mediated devices from
> @@ -152,15 +155,15 @@ The callbacks in the mdev_parent_ops structure are as follows:
> * mmap: mmap emulation callback
>
> A driver should use the mdev_parent_ops structure in the function call to
> -register itself with the mdev core driver:
> +register itself with the mdev core driver::
>
> -extern int mdev_register_device(struct device *dev,
> - const struct mdev_parent_ops *ops);
> + extern int mdev_register_device(struct device *dev,
> + const struct mdev_parent_ops *ops);
>
> However, the mdev_parent_ops structure is not required in the function call
> -that a driver should use to unregister itself with the mdev core driver:
> +that a driver should use to unregister itself with the mdev core driver::
>
> -extern void mdev_unregister_device(struct device *dev);
> + extern void mdev_unregister_device(struct device *dev);
>
>
> Mediated Device Management Interface Through sysfs
> @@ -183,30 +186,32 @@ with the mdev core driver.
> Directories and files under the sysfs for Each Physical Device
> --------------------------------------------------------------
>
> -|- [parent physical device]
> -|--- Vendor-specific-attributes [optional]
> -|--- [mdev_supported_types]
> -| |--- [<type-id>]
> -| | |--- create
> -| | |--- name
> -| | |--- available_instances
> -| | |--- device_api
> -| | |--- description
> -| | |--- [devices]
> -| |--- [<type-id>]
> -| | |--- create
> -| | |--- name
> -| | |--- available_instances
> -| | |--- device_api
> -| | |--- description
> -| | |--- [devices]
> -| |--- [<type-id>]
> -| |--- create
> -| |--- name
> -| |--- available_instances
> -| |--- device_api
> -| |--- description
> -| |--- [devices]
> +::
> +
> + |- [parent physical device]
> + |--- Vendor-specific-attributes [optional]
> + |--- [mdev_supported_types]
> + | |--- [<type-id>]
> + | | |--- create
> + | | |--- name
> + | | |--- available_instances
> + | | |--- device_api
> + | | |--- description
> + | | |--- [devices]
> + | |--- [<type-id>]
> + | | |--- create
> + | | |--- name
> + | | |--- available_instances
> + | | |--- device_api
> + | | |--- description
> + | | |--- [devices]
> + | |--- [<type-id>]
> + | |--- create
> + | |--- name
> + | |--- available_instances
> + | |--- device_api
> + | |--- description
> + | |--- [devices]
>
> * [mdev_supported_types]
>
> @@ -219,12 +224,12 @@ Directories and files under the sysfs for Each Physical Device
>
> The [<type-id>] name is created by adding the device driver string as a prefix
> to the string provided by the vendor driver. This format of this name is as
> - follows:
> + follows::
>
> sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name);
>
> (or using mdev_parent_dev(mdev) to arrive at the parent device outside
> - of the core mdev code)
> + of the core mdev code)
>
> * device_api
>
> @@ -239,7 +244,7 @@ Directories and files under the sysfs for Each Physical Device
> * [device]
>
> This directory contains links to the devices of type <type-id> that have been
> -created.
> + created.
>
> * name
>
> @@ -253,21 +258,25 @@ created.
> Directories and Files Under the sysfs for Each mdev Device
> ----------------------------------------------------------
>
> -|- [parent phy device]
> -|--- [$MDEV_UUID]
> +::
> +
> + |- [parent phy device]
> + |--- [$MDEV_UUID]
> |--- remove
> |--- mdev_type {link to its type}
> |--- vendor-specific-attributes [optional]
>
> * remove (write only)
> +
> Writing '1' to the 'remove' file destroys the mdev device. The vendor driver can
> fail the remove() callback if that device is active and the vendor driver
> doesn't support hot unplug.
>
> -Example:
> +Example::
> +
> # echo 1 > /sys/bus/mdev/devices/$mdev_UUID/remove
>
> -Mediated device Hot plug:
> +Mediated device Hot plug
> ------------------------
>
> Mediated devices can be created and assigned at runtime. The procedure to hot
> @@ -277,13 +286,13 @@ Translation APIs for Mediated Devices
> =====================================
>
> The following APIs are provided for translating user pfn to host pfn in a VFIO
> -driver:
> +driver::
>
> -extern int vfio_pin_pages(struct device *dev, unsigned long *user_pfn,
> - int npage, int prot, unsigned long *phys_pfn);
> + extern int vfio_pin_pages(struct device *dev, unsigned long *user_pfn,
> + int npage, int prot, unsigned long *phys_pfn);
>
> -extern int vfio_unpin_pages(struct device *dev, unsigned long *user_pfn,
> - int npage);
> + extern int vfio_unpin_pages(struct device *dev, unsigned long *user_pfn,
> + int npage);
>
> These functions call back into the back-end IOMMU module by using the pin_pages
> and unpin_pages callbacks of the struct vfio_iommu_driver_ops[4]. Currently
> @@ -304,81 +313,80 @@ card.
>
> This step creates a dummy device, /sys/devices/virtual/mtty/mtty/
>
> - Files in this device directory in sysfs are similar to the following:
> + Files in this device directory in sysfs are similar to the following::
>
> - # tree /sys/devices/virtual/mtty/mtty/
> - /sys/devices/virtual/mtty/mtty/
> - |-- mdev_supported_types
> - | |-- mtty-1
> - | | |-- available_instances
> - | | |-- create
> - | | |-- device_api
> - | | |-- devices
> - | | `-- name
> - | `-- mtty-2
> - | |-- available_instances
> - | |-- create
> - | |-- device_api
> - | |-- devices
> - | `-- name
> - |-- mtty_dev
> - | `-- sample_mtty_dev
> - |-- power
> - | |-- autosuspend_delay_ms
> - | |-- control
> - | |-- runtime_active_time
> - | |-- runtime_status
> - | `-- runtime_suspended_time
> - |-- subsystem -> ../../../../class/mtty
> - `-- uevent
> + # tree /sys/devices/virtual/mtty/mtty/
> + /sys/devices/virtual/mtty/mtty/
> + |-- mdev_supported_types
> + | |-- mtty-1
> + | | |-- available_instances
> + | | |-- create
> + | | |-- device_api
> + | | |-- devices
> + | | `-- name
> + | `-- mtty-2
> + | |-- available_instances
> + | |-- create
> + | |-- device_api
> + | |-- devices
> + | `-- name
> + |-- mtty_dev
> + | `-- sample_mtty_dev
> + |-- power
> + | |-- autosuspend_delay_ms
> + | |-- control
> + | |-- runtime_active_time
> + | |-- runtime_status
> + | `-- runtime_suspended_time
> + |-- subsystem -> ../../../../class/mtty
> + `-- uevent
>
> 2. Create a mediated device by using the dummy device that you created in the
> - previous step.
> + previous step::
>
> - # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \
> + # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \
> /sys/devices/virtual/mtty/mtty/mdev_supported_types/mtty-2/create
>
> -3. Add parameters to qemu-kvm.
> +3. Add parameters to qemu-kvm::
>
> - -device vfio-pci,\
> - sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
> + -device vfio-pci,\
> + sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
>
> 4. Boot the VM.
>
> In the Linux guest VM, with no hardware on the host, the device appears
> - as follows:
> + as follows::
>
> - # lspci -s 00:05.0 -xxvv
> - 00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
> - Subsystem: Device 4348:3253
> - Physical Slot: 5
> - Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> - Stepping- SERR- FastB2B- DisINTx-
> - Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> - <TAbort- <MAbort- >SERR- <PERR- INTx-
> - Interrupt: pin A routed to IRQ 10
> - Region 0: I/O ports at c150 [size=8]
> - Region 1: I/O ports at c158 [size=8]
> - Kernel driver in use: serial
> - 00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00
> - 10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00
> - 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32
> - 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
> + # lspci -s 00:05.0 -xxvv
> + 00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
> + Subsystem: Device 4348:3253
> + Physical Slot: 5
> + Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> + Stepping- SERR- FastB2B- DisINTx-
> + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> + <TAbort- <MAbort- >SERR- <PERR- INTx-
> + Interrupt: pin A routed to IRQ 10
> + Region 0: I/O ports at c150 [size=8]
> + Region 1: I/O ports at c158 [size=8]
> + Kernel driver in use: serial
> + 00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00
> + 10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00
> + 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32
> + 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
>
> - In the Linux guest VM, dmesg output for the device is as follows:
> + In the Linux guest VM, dmesg output for the device is as follows:
>
> - serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ
> -10
> - 0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A
> - 0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A
> + serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
> + 0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A
> + 0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A
>
>
> -5. In the Linux guest VM, check the serial ports.
> +5. In the Linux guest VM, check the serial ports::
>
> - # setserial -g /dev/ttyS*
> - /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
> - /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10
> - /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10
> + # setserial -g /dev/ttyS*
> + /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
> + /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10
> + /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10
>
> 6. Using minicom or any terminal emulation program, open port /dev/ttyS1 or
> /dev/ttyS2 with hardware flow control disabled.
> @@ -388,14 +396,14 @@ card.
>
> Data is loop backed from hosts mtty driver.
>
> -8. Destroy the mediated device that you created.
> +8. Destroy the mediated device that you created::
>
> - # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove
> + # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove
>
> References
> ==========
>
> -[1] See Documentation/vfio.txt for more information on VFIO.
> -[2] struct mdev_driver in include/linux/mdev.h
> -[3] struct mdev_parent_ops in include/linux/mdev.h
> -[4] struct vfio_iommu_driver_ops in include/linux/vfio.h
> +1. See Documentation/vfio.txt for more information on VFIO.
> +2. struct mdev_driver in include/linux/mdev.h
> +3. struct mdev_parent_ops in include/linux/mdev.h
> +4. struct vfio_iommu_driver_ops in include/linux/vfio.h
>

Next message: Florian Fainelli: "Re: [PATCH net-next 19/20] net: dsa: add MDB notifier"
Previous message: Florian Fainelli: "Re: [PATCH net-next 18/20] net: dsa: add FDB notifier"
In reply to: Mauro Carvalho Chehab: "[PATCH 23/29] vfio-mediated-device.txt: standardize document format"
Next in thread: Mauro Carvalho Chehab: "[PATCH 13/29] SAK.txt: standardize document format"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]