Re: [PATCH v5] mfd:rtsx: do retry when DMA transfer error

[Lee Jones]

On Tue, 23 May 2017, steven_feng@xxxxxxxxxxxxxx wrote:

> From: Steven Feng <steven_feng@xxxxxxxxxxxxxx>
> 
> The request should be resent when DMA transfer error occurred.
> For rts5227, the clock rate needs to be reduced when error occurred.
> 
> Signed-off-by: Steven Feng <steven_feng@xxxxxxxxxxxxxx>
> ---
>  drivers/mfd/rtsx_pcr.c       | 17 +++++++++++++++--
>  include/linux/mfd/rtsx_pci.h |  5 +++++
>  2 files changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
> index 98029ee..ca2738c 100644
> --- a/drivers/mfd/rtsx_pcr.c
> +++ b/drivers/mfd/rtsx_pcr.c
> @@ -30,6 +30,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/mfd/core.h>
>  #include <linux/mfd/rtsx_pci.h>
> +#include <linux/mmc/card.h>
>  #include <asm/unaligned.h>
>  
>  #include "rtsx_pcr.h"
> @@ -452,8 +453,12 @@ int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
>  	}
>  
>  	spin_lock_irqsave(&pcr->lock, flags);
> -	if (pcr->trans_result == TRANS_RESULT_FAIL)
> -		err = -EINVAL;
> +	if (pcr->trans_result == TRANS_RESULT_FAIL) {
> +		err = -EILSEQ;
> +		if (pcr->dma_error_count < RTS_MAX_TIMES_FREQ_REDUCTION)
> +			pcr->dma_error_count++;
> +	}
> +
>  	else if (pcr->trans_result == TRANS_NO_DEVICE)
>  		err = -ENODEV;
>  	spin_unlock_irqrestore(&pcr->lock, flags);
> @@ -659,6 +664,13 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
>  	if (err < 0)
>  		return err;
>  
> +	/*Reduce MMC card clock by 20MHz each time a DMA transfer error occurs*/

This is not acceptable either.  There should be spaced either side of
the comment body, so "/* Something */".

> +	if (card_clock == UHS_SDR104_MAX_DTR &&
> +	    pcr->dma_error_count &&
> +	    PCI_PID(pcr) == RTS5227_DEVICE_ID)
> +		card_clock = UHS_SDR104_MAX_DTR -
> +			(pcr->dma_error_count * 20000000);
> +
>  	card_clock /= 1000000;
>  	pcr_dbg(pcr, "Switch card clock to %dMHz\n", card_clock);
>  
> @@ -894,6 +906,7 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
>  			pcr->card_removed |= SD_EXIST;
>  			pcr->card_inserted &= ~SD_EXIST;
>  		}
> +		pcr->dma_error_count = 0;
>  	}
>  
>  	if (int_reg & MS_INT) {
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index 7eb7cba..116816f 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -850,6 +850,9 @@
>  
>  #define rtsx_pci_init_cmd(pcr)		((pcr)->ci = 0)
>  
> +#define RTS5227_DEVICE_ID		0x5227
> +#define RTS_MAX_TIMES_FREQ_REDUCTION	8
> +
>  struct rtsx_pcr;
>  
>  struct pcr_handle {
> @@ -957,6 +960,8 @@ struct rtsx_pcr {
>  
>  	int				num_slots;
>  	struct rtsx_slot		*slots;
> +
> +	u8				dma_error_count;
>  };
>  
>  #define CHK_PCI_PID(pcr, pid)		((pcr)->pci->device == (pid))

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog