RE: [PATCH] PCI: Make SR-IOV capable GPU working on the SR-IOV incapable platform

[Deucher, Alexander]

> -----Original Message-----
> From: Cheng, Collins
> Sent: Thursday, May 11, 2017 10:51 PM
> To: Bjorn Helgaas; linux-pci@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Cc: Deucher, Alexander; Zytaruk, Kelly
> Subject: [PATCH] PCI: Make SR-IOV capable GPU working on the SR-IOV
> incapable platform
> 
> Hi Helgaas,
> 
> Some AMD GPUs have hardware support for graphics SR-IOV.
> If the SR-IOV capable GPU is plugged into the SR-IOV incapable
> platform. It would cause a problem on PCI resource allocation in
> current Linux kernel.
> 
> Therefore in order to allow the PF (Physical Function) device of
> SR-IOV capable GPU to work on the SR-IOV incapable platform,
> it is required to verify conditions for initializing BAR resources
> on AMD SR-IOV capable GPUs.
> 
> If the device is an AMD graphics device and it supports
> SR-IOV it will require a large amount of resources.
> Before calling sriov_init() must ensure that the system
> BIOS also supports SR-IOV and that system BIOS has been
> able to allocate enough resources.
> If the VF BARs are zero then the system BIOS does not
> support SR-IOV or it could not allocate the resources
> and this platform will not support AMD graphics SR-IOV.
> Therefore do not call sriov_init().
> If the system BIOS does support SR-IOV then the VF BARs
> will be properly initialized to non-zero values.
> 
> Below is the patch against to Kernel 4.8 & 4.9. Please review.

For upstream, the patch should be against Linus' master or the Bjorn's pci-next tree.

Alex

> 
> I checked the drivers/pci/quirks.c, it looks the workarounds/fixes in
> quirks.c are for specific devices and one or more device ID are defined
> for the specific devices. However my patch is for all AMD SR-IOV
> capable GPUs, that includes all existing and future AMD server GPUs.
> So it doesn't seem like a good fit to put the fix in quirks.c.
> 
> 
> 
> Signed-off-by: Collins Cheng <collins.cheng@xxxxxxx>
> ---
>  drivers/pci/iov.c | 63
> ++++++++++++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 60 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> index e30f05c..e4f1405 100644
> --- a/drivers/pci/iov.c
> +++ b/drivers/pci/iov.c
> @@ -523,6 +523,45 @@ static void sriov_restore_state(struct pci_dev *dev)
>  		msleep(100);
>  }
> 
> +/*
> + * pci_vf_bar_valid - check if VF BARs have resource allocated
> + * @dev: the PCI device
> + * @pos: register offset of SR-IOV capability in PCI config space
> + * Returns true any VF BAR has resource allocated, false
> + * if all VF BARs are empty.
> + */
> +static bool pci_vf_bar_valid(struct pci_dev *dev, int pos)
> +{
> +	int i;
> +	u32 bar_value;
> +	u32 bar_size_mask = ~(PCI_BASE_ADDRESS_SPACE |
> +			PCI_BASE_ADDRESS_MEM_TYPE_64 |
> +			PCI_BASE_ADDRESS_MEM_PREFETCH);
> +
> +	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
> +		pci_read_config_dword(dev, pos + PCI_SRIOV_BAR + i * 4,
> &bar_value);
> +		if (bar_value & bar_size_mask)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
> +/*
> + * is_amd_display_adapter - check if it is an AMD/ATI GPU device
> + * @dev: the PCI device
> + *
> + * Returns true if device is an AMD/ATI display adapter,
> + * otherwise return false.
> + */
> +
> +static bool is_amd_display_adapter(struct pci_dev *dev)
> +{
> +	return (((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) &&
> +		(dev->vendor == PCI_VENDOR_ID_ATI ||
> +		dev->vendor == PCI_VENDOR_ID_AMD));
> +}
> +
>  /**
>   * pci_iov_init - initialize the IOV capability
>   * @dev: the PCI device
> @@ -537,9 +576,27 @@ int pci_iov_init(struct pci_dev *dev)
>  		return -ENODEV;
> 
>  	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
> -	if (pos)
> -		return sriov_init(dev, pos);
> -
> +	if (pos) {
> +	/*
> +	 * If the device is an AMD graphics device and it supports
> +	 * SR-IOV it will require a large amount of resources.
> +	 * Before calling sriov_init() must ensure that the system
> +	 * BIOS also supports SR-IOV and that system BIOS has been
> +	 * able to allocate enough resources.
> +	 * If the VF BARs are zero then the system BIOS does not
> +	 * support SR-IOV or it could not allocate the resources
> +	 * and this platform will not support AMD graphics SR-IOV.
> +	 * Therefore do not call sriov_init().
> +	 * If the system BIOS does support SR-IOV then the VF BARs
> +	 * will be properly initialized to non-zero values.
> +	 */
> +		if (is_amd_display_adapter(dev)) {
> +			if (pci_vf_bar_valid(dev, pos))
> +				return sriov_init(dev, pos);
> +		} else {
> +			return sriov_init(dev, pos);
> +		}
> +	}
>  	return -ENODEV;
>  }
> 
> --
> 1.9.1
> 
> 
> 
> -Collins Cheng