Re: [PATCH] RFC: arm: eBPF JIT compiler

[Shubham Bansal]

Hi Florian,

It would be great if you could help me with it.

Currently, what I am doing is.

 root@arm$ ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make -j4

Then I am using Busybox to build the root filesystem

root@arm$ qemu-system-arm -M vexpress-a9 -dtb
./linux/arch/arm/boot/dts/vexpress-v2p-ca9.dtb -kernel
./linux/arch/arm/boot/zImage -append "root=/dev/mmcblk0
console=ttyAMA0" -sd ./a9rootfs.ext3 --nographic

Which machine I should use for ARMv6 in QEMU. Which dtb file I should
use for ? All these questions I have. If anybody knows please let me
know.


Best,
Shubham Bansal


On Fri, May 26, 2017 at 1:14 AM, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
> On 05/25/2017 12:09 PM, Shubham Bansal wrote:
>> Hi Andrew,
>>
>> On Fri, May 26, 2017 at 12:18 AM, Andrew Lunn <andrew@xxxxxxx> wrote:
>>> On Fri, May 26, 2017 at 12:05:23AM +0530, Shubham Bansal wrote:
>>>> Hi Andrew,
>>>>
>>>> My Apologies.
>>>>
>>>> I will remove the #ifdef CONFIG_CPU_LITTLE_ENDIAN. Do you have the
>>>> ARMv6 machine you can test it on?
>>>
>>> Sorry, i don't have a v6.
>>>
>>> Maybe try kzm with qemu-system-qemu?
>>
>> I am afraid I not so familiar with qemu, otherwise I would have tried
>> to test the code on ARMv5,6,7 myself.
>> If you can help me with that it would be great, Otherwise I think I
>> have to wait for someone to test it for ARMv6. Although, I am pretty
>> sure it would work on that as it worked on ARMv5.
>
> Using QEMU is far less complex than the patch you wrote, the tricky
> point me be to find an ARMv6 root filesystem, unless you build the
> module into the kernel and let it run its tests.
> --
> Florian