[PATCH v3 1/2] mmc: dw_mmc: Use device_property_read instead of of_property_read

From: David Woods
Date: Fri May 26 2017 - 21:17:53 EST


Using the device_property interfaces allows the dw_mmc driver to work
on platforms which run on either device tree or ACPI.

Signed-off-by: David Woods <dwoods@xxxxxxxxxxxx>
Reviewed-by: Chris Metcalf <cmetcalf@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxx
---
drivers/mmc/host/dw_mmc.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index e45129f..efde0f2 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2707,8 +2707,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
host->slot[id] = slot;

mmc->ops = &dw_mci_ops;
- if (of_property_read_u32_array(host->dev->of_node,
- "clock-freq-min-max", freq, 2)) {
+ if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
+ freq, 2)) {
mmc->f_min = DW_MCI_FREQ_MIN;
mmc->f_max = DW_MCI_FREQ_MAX;
} else {
@@ -2808,7 +2808,6 @@ static void dw_mci_init_dma(struct dw_mci *host)
{
int addr_config;
struct device *dev = host->dev;
- struct device_node *np = dev->of_node;

/*
* Check tansfer mode from HCON[17:16]
@@ -2869,8 +2868,9 @@ static void dw_mci_init_dma(struct dw_mci *host)
dev_info(host->dev, "Using internal DMA controller.\n");
} else {
/* TRANS_MODE_EDMAC: check dma bindings again */
- if ((of_property_count_strings(np, "dma-names") < 0) ||
- (!of_find_property(np, "dmas", NULL))) {
+ if ((device_property_read_string_array(dev, "dma-names",
+ NULL, 0) < 0) ||
+ !device_property_present(dev, "dmas")) {
goto no_dma;
}
host->dma_ops = &dw_mci_edmac_ops;
@@ -2937,7 +2937,6 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
{
struct dw_mci_board *pdata;
struct device *dev = host->dev;
- struct device_node *np = dev->of_node;
const struct dw_mci_drv_data *drv_data = host->drv_data;
int ret;
u32 clock_frequency;
@@ -2954,20 +2953,21 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
}

/* find out number of slots supported */
- of_property_read_u32(np, "num-slots", &pdata->num_slots);
+ device_property_read_u32(dev, "num-slots", &pdata->num_slots);

- if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
+ if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth))
dev_info(dev,
"fifo-depth property not found, using value of FIFOTH register as default\n");

- of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
+ device_property_read_u32(dev, "card-detect-delay",
+ &pdata->detect_delay_ms);

- of_property_read_u32(np, "data-addr", &host->data_addr_override);
+ device_property_read_u32(dev, "data-addr", &host->data_addr_override);

- if (of_get_property(np, "fifo-watermark-aligned", NULL))
+ if (device_property_present(dev, "fifo-watermark-aligned"))
host->wm_aligned = true;

- if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
+ if (!device_property_read_u32(dev, "clock-frequency", &clock_frequency))
pdata->bus_hz = clock_frequency;

if (drv_data && drv_data->parse_dt) {
--
2.7.2