Re: [PATCH 1/4] thermal: uniphier: add UniPhier thermal driver

[Keerthy]

On Tuesday 30 May 2017 08:17 AM, Kunihiko Hayashi wrote:
> Hi Keerthy,
> Thank you for your comment.
> 
> On Mon, 29 May 2017 15:53:39 +0530 Keerthy <j-keerthy@xxxxxx> wrote:
>>
>>
>> On Monday 29 May 2017 02:45 PM, Kunihiko Hayashi wrote:
>>> Add a thermal driver for on-chip PVT (Process, Voltage and Temperature)
>>> monitoring unit implemented on UniPhier SoCs. This driver supports
>>> temperature monitoring and alert function.
>>
>> The Documentation in patch 2/4 should be squashed into this patch.
> 
> According to the following guide,
> http://elixir.free-electrons.com/linux/latest/source/Documentation/devicetree/bindings/submitting-patches.txt
> 
>   1) The Documentation/ portion of the patch should be a separate patch.
> 
> I think it should be separated, how about that?

Then you should reorder the series as we get the warning with checkpatch:

WARNING: DT compatible string "socionext,uniphier-pxs2-thermal" appears
un-documented -- check ./Documentation/devicetree/bindings/
#488: FILE: drivers/thermal/uniphier_thermal.c:367:
+		.compatible = "socionext,uniphier-pxs2-thermal",

WARNING: DT compatible string "socionext,uniphier-ld20-thermal" appears
un-documented -- check ./Documentation/devicetree/bindings/
#492: FILE: drivers/thermal/uniphier_thermal.c:371:
+		.compatible = "socionext,uniphier-ld20-thermal",

When i apply the first patch.

> 
>>>
>>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
>>> ---
>>>  drivers/thermal/Kconfig            |   8 +
>>>  drivers/thermal/Makefile           |   1 +
>>>  drivers/thermal/uniphier_thermal.c | 390 +++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 399 insertions(+)
>>>  create mode 100644 drivers/thermal/uniphier_thermal.c
>>>
>>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>>> index 776b343..93ccf25 100644
>>> --- a/drivers/thermal/Kconfig
>>> +++ b/drivers/thermal/Kconfig
>>> @@ -453,4 +453,12 @@ config ZX2967_THERMAL
>>>  	  the primitive temperature sensor embedded in zx2967 SoCs.
>>>  	  This sensor generates the real time die temperature.
>>>  
>>> +config UNIPHIER_THERMAL
>>> +	tristate "Socionext UniPhier thermal driver"
>>> +	depends on ARCH_UNIPHIER || COMPILE_TEST
>>> +	help
>>> +	  Enable this to support thermal reporting on UniPhier SoC.
>>> +	  This driver supports CPU thermal zone to reports the temperture
>>
>> /s/temperture/temperature
>>
>> Or consider re-wording to
>>
>> "Enable this to plug in UniPhier on-chip PVT thermal driver into Linux
>> thermal framework. The driver supports CPU thermal zone temperature
>> reporting and a couple of trip points."
> 
> Thanks for finding a typo and your re-wording. I'll fix it.
> 
>>> +	  and trip points.
>>> +
>>>  endif
>>> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
>>> index 7adae20..05b6e7c 100644
>>> --- a/drivers/thermal/Makefile
>>> +++ b/drivers/thermal/Makefile
>>> @@ -58,3 +58,4 @@ obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
>>>  obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
>>>  obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
>>>  obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o
>>> +obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
>>> diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c
>>> new file mode 100644
>>> index 0000000..ae7e5ce
>>> --- /dev/null
>>> +++ b/drivers/thermal/uniphier_thermal.c
>>> @@ -0,0 +1,390 @@
>>> +/**
>>> + * uniphier_thermal.c - Socionext UniPhier thermal driver
>>> + *
>>> + * Copyright 2014 Panasonic Corporation
>>> + * Copyright 2016 Socionext Inc.
>>
>> Update this please.
> 
> I see. I'll update it.
> 
>>> + * All rights reserved.
>>> + *
>>> + * Author:
>>> + *	Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
>>> + *
>>> + * This program is free software: you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2  of
>>> + * the License as published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/bitops.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/mfd/syscon.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/regmap.h>
>>> +#include <linux/thermal.h>
>>> +
>>> +#include "thermal_core.h"
>>> +
>>> +/*
>>> + * block registers
>>> + * addresses are the offset from .block_base
>>> + */
>>> +#define PVTCTLEN				0x0000
>>> +#define PVTCTLEN_EN				BIT(0)
>>> +
>>> +#define PVTCTLMODE				0x0004
>>> +#define PVTCTLMODE_MASK				0xf
>>> +#define PVTCTLMODE_TEMPMON			0x5
>>> +
>>> +#define EMONREPEAT				0x0040
>>> +#define EMONREPEAT_ENDLESS			BIT(24)
>>> +#define EMONREPEAT_PERIOD			0xf
>>> +#define EMONREPEAT_PERIOD_1000000		0x9
>>> +
>>> +/*
>>> + * common registers
>>> + * addresses are the offset from .map_base
>>> + */
>>> +#define PVTCTLSEL				0x0900
>>> +#define PVTCTLSEL_MASK				0x7
>>> +#define PVTCTLSEL_MONITOR			0
>>> +
>>> +#define SETALERT0				0x0910
>>> +#define SETALERT1				0x0914
>>> +#define SETALERT2				0x0918
>>> +#define SETALERT_TEMP_OVF			(0xff << 16)
>>> +#define SETALERT_TEMP_OVF_VALUE(val)		(((val) & 0xff) << 16)
>>> +#define SETALERT_EN				BIT(0)
>>> +
>>> +#define PMALERTINTCTL				0x0920
>>> +#define PMALERTINTCTL_CLR(ch)			BIT(4 * (ch) + 2)
>>> +#define PMALERTINTCTL_SET(ch)			BIT(4 * (ch) + 1)
>>> +#define PMALERTINTCTL_EN(ch)			BIT(4 * (ch) + 0)
>>> +#define PMALERTINTCTL_MASK			0x777
>>> +
>>> +#define TMOD					0x0928
>>> +#define TMOD_MASK				0x1ff
>>> +
>>> +#define TMODCOEF				0x0e5c
>>> +
>>> +#define TMODSETUP0_EN				BIT(30)
>>> +#define TMODSETUP0_VAL(val)			(((val) & 0x3fff) << 16)
>>> +#define TMODSETUP1_EN				BIT(15)
>>> +#define TMODSETUP1_VAL(val)			((val) & 0x7fff)
>>> +
>>> +/* SoC critical temperature is 95 degrees Celsius */
>>> +#define CRITICAL_TEMP_LIMIT			(95 * 1000)
>>> +
>>> +/* Max # of alert channels */
>>> +#define ALERT_CH_NUM				3
>>> +
>>> +/* SoC specific thermal sensor data */
>>> +struct uniphier_tm_soc_data {
>>> +	u32 map_base;
>>> +	u32 block_base;
>>> +	u32 tmod_setup_addr;
>>> +};
>>> +
>>> +struct uniphier_tm_dev {
>>> +	struct regmap *regmap;
>>> +	bool alert_en[ALERT_CH_NUM];
>>> +	u32 tmod_calib0;
>>> +	u32 tmod_calib1;
>>> +	struct thermal_zone_device *tz_dev;
>>> +	const struct uniphier_tm_soc_data *data;
>>> +};
>>> +
>>> +static int uniphier_tm_initialize_sensor(struct uniphier_tm_dev *tdev)
>>> +{
>>> +	struct regmap *map = tdev->regmap;
>>> +	u32 val;
>>> +	int ret;
>>> +
>>> +	/* stop PVT */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->block_base + PVTCTLEN,
>>> +			  PVTCTLEN_EN, 0);
>>> +
>>> +	/*
>>> +	 * set default value if missing calibrated value
>>> +	 *
>>> +	 * Since SoC has a calibrated value that was set in advance,
>>> +	 * TMODCOEF shows non-zero and PVT refers the value internally.
>>> +	 *
>>> +	 * However, there is the case that some SoCs might not have the
>>> +	 * calibrated value. In that case, TMODCOEF shows zero and the driver
>>> +	 * has to set default value manually.
>>> +	 */
>>> +	ret = regmap_read(map, tdev->data->map_base + TMODCOEF, &val);
>>> +	if (ret)
>>> +		return ret;
>>> +	if (!val)
>>> +		regmap_write(map,
>>> +			     tdev->data->tmod_setup_addr,
>>> +			     TMODSETUP0_EN |
>>
>> I guess the above parameter could be included in the previous line. Here
>> and else where can save a number of lines.
>>
>> Ex: regmap_write(map, tdev->data->tmod_setup_addr, TMODSETUP0_EN |
>>
>> Can go in a single line.
> 
> OK, I'll make an effort to save a number of lines including other lines.
> 
>>> +			     TMODSETUP0_VAL(tdev->tmod_calib0) |
>>> +			     TMODSETUP1_EN |
>>> +			     TMODSETUP1_VAL(tdev->tmod_calib1));
>>> +
>>> +	/* select temperature mode */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->block_base + PVTCTLMODE,
>>> +			  PVTCTLMODE_MASK,
>>> +			  PVTCTLMODE_TEMPMON);
>>> +
>>> +	/* set monitoring period */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->block_base + EMONREPEAT,
>>> +			  EMONREPEAT_ENDLESS |
>>> +			  EMONREPEAT_PERIOD,
>>> +			  EMONREPEAT_ENDLESS |
>>> +			  EMONREPEAT_PERIOD_1000000);
>>> +
>>> +	/* set monitor mode */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->map_base + PVTCTLSEL,
>>> +			  PVTCTLSEL_MASK, PVTCTLSEL_MONITOR);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static void uniphier_tm_set_alert(struct uniphier_tm_dev *tdev, u32 ch,
>>> +				  u32 temp)
>>> +{
>>> +	struct regmap *map = tdev->regmap;
>>> +
>>> +	/* set alert temperature */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->map_base + SETALERT0 + (ch << 2),
>>> +			  SETALERT_EN |
>>> +			  SETALERT_TEMP_OVF,
>>> +			  SETALERT_EN |
>>> +			  SETALERT_TEMP_OVF_VALUE(temp / 1000));
>>> +}
>>> +
>>> +static void uniphier_tm_enable_sensor(struct uniphier_tm_dev *tdev)
>>> +{
>>> +	struct regmap *map = tdev->regmap;
>>> +	int i;
>>> +	u32 bits = 0;
>>> +
>>> +	for (i = 0; i < ALERT_CH_NUM; i++)
>>> +		if (tdev->alert_en[i])
>>> +			bits |= PMALERTINTCTL_EN(i);
>>> +
>>> +	/* enable alert interrupt */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->map_base + PMALERTINTCTL,
>>> +			  PMALERTINTCTL_MASK, bits);
>>> +
>>> +	/* start PVT */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->block_base + PVTCTLEN,
>>> +			  PVTCTLEN_EN, PVTCTLEN_EN);
>>> +}
>>> +
>>> +static void uniphier_tm_disable_sensor(struct uniphier_tm_dev *tdev)
>>> +{
>>> +	struct regmap *map = tdev->regmap;
>>> +
>>> +	/* disable alert interrupt */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->map_base + PMALERTINTCTL,
>>> +			  PMALERTINTCTL_MASK, 0);
>>> +
>>> +	/* stop PVT */
>>> +	regmap_write_bits(map,
>>> +			  tdev->data->block_base + PVTCTLEN,
>>> +			  PVTCTLEN_EN, 0);
>>> +}
>>> +
>>> +static int uniphier_tm_get_temp(void *data, int *out_temp)
>>> +{
>>> +	struct uniphier_tm_dev *tdev = data;
>>> +	struct regmap *map = tdev->regmap;
>>> +	int ret;
>>> +	u32 temp;
>>> +
>>> +	ret = regmap_read(map, tdev->data->map_base + TMOD, &temp);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	temp &= TMOD_MASK;
>>> +	*out_temp = temp * 1000;	/* millicelsius */
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct thermal_zone_of_device_ops uniphier_of_thermal_ops = {
>>> +	.get_temp = uniphier_tm_get_temp,
>>> +};
>>> +
>>> +static void uniphier_tm_irq_clear(struct uniphier_tm_dev *tdev)
>>> +{
>>> +	u32 mask = 0, bits = 0;
>>> +	int i;
>>> +
>>> +	for (i = 0; i < ALERT_CH_NUM; i++) {
>>> +		mask |= (PMALERTINTCTL_CLR(i) |
>>> +			 PMALERTINTCTL_SET(i));
>>> +		bits |= PMALERTINTCTL_CLR(i);
>>> +	}
>>> +
>>> +	/* clear alert interrupt */
>>> +	regmap_write_bits(tdev->regmap,
>>> +			  tdev->data->map_base + PMALERTINTCTL, mask, bits);
>>> +}
>>> +
>>> +static irqreturn_t uniphier_tm_alarm_handler(int irq, void *_tdev)
>>> +{
>>> +	struct uniphier_tm_dev *tdev = _tdev;
>>> +
>>> +	uniphier_tm_irq_clear(tdev);
>>> +	thermal_zone_device_update(tdev->tz_dev, THERMAL_EVENT_UNSPECIFIED);
>>> +
>>> +	return IRQ_HANDLED;
>>> +}
>>> +
>>> +static int uniphier_tm_probe(struct platform_device *pdev)
>>> +{
>>> +	struct device *dev = &pdev->dev;
>>> +	struct regmap *regmap;
>>> +	struct device_node *parent;
>>> +	struct uniphier_tm_dev *tdev;
>>> +	const struct thermal_trip *trips;
>>> +	const u32 *calib;
>>> +	int i, ret, irq, ntrips, crit_temp = INT_MAX;
>>> +
>>> +	tdev = devm_kzalloc(dev, sizeof(*tdev), GFP_KERNEL);
>>> +	if (!tdev)
>>> +		return -ENOMEM;
>>> +
>>> +	tdev->data = of_device_get_match_data(dev);
>>> +	if (WARN_ON(!tdev->data))
>>> +		return -EINVAL;
>>> +
>>> +	/* get irq */
>>> +	irq = platform_get_irq(pdev, 0);
>>> +	if (irq < 0)
>>> +		return irq;
>>> +
>>> +	/* get tmod-calibration values */
>>> +	calib = of_get_property(dev->of_node, "socionext,tmod-calibration",
>>> +				NULL);
>>> +	if (calib) {
>>> +		tdev->tmod_calib0 = of_read_number(calib, 1);
>>> +		tdev->tmod_calib1 = of_read_number(calib + 1, 1);
>>> +	}
>>> +
>>> +	/* get regmap from syscon node */
>>> +	parent = of_get_parent(dev->of_node); /* parent should be syscon node */
>>> +	regmap = syscon_node_to_regmap(parent);
>>> +	of_node_put(parent);
>>> +	if (IS_ERR(regmap)) {
>>> +		dev_err(dev, "failed to get regmap (error %ld)\n",
>>> +			PTR_ERR(regmap));
>>> +		return PTR_ERR(regmap);
>>> +	}
>>> +	tdev->regmap = regmap;
>>> +
>>> +	/* register sensor */
>>> +	tdev->tz_dev = devm_thermal_zone_of_sensor_register(dev, 0, tdev,
>>> +						&uniphier_of_thermal_ops);
>>> +	if (IS_ERR(tdev->tz_dev)) {
>>> +		dev_err(dev, "failed to register sensor device\n");
>>> +		return PTR_ERR(tdev->tz_dev);
>>> +	}
>>> +
>>> +	/* get trip points */
>>> +	trips = of_thermal_get_trip_points(tdev->tz_dev);
>>> +	ntrips = of_thermal_get_ntrips(tdev->tz_dev);
>>> +	if (ntrips > ALERT_CH_NUM) {
>>> +		dev_err(dev, "thermal zone has too many trips\n");
>>> +		return -E2BIG;
>>> +	}
>>> +
>>> +	/* initialize sensor */
>>> +	ret = uniphier_tm_initialize_sensor(tdev);
>>> +	if (ret) {
>>> +		dev_err(dev, "failed to initialize sensor\n");
>>> +		return ret;
>>> +	}
>>> +	for (i = 0; i < ntrips; i++) {
>>> +		if (trips[i].type == THERMAL_TRIP_CRITICAL &&
>>> +		    trips[i].temperature < crit_temp)
>>> +			crit_temp = trips[i].temperature;
>>> +		uniphier_tm_set_alert(tdev, i, trips[i].temperature);
>>> +		tdev->alert_en[i] = true;
>>> +	}
>>> +	if (crit_temp > CRITICAL_TEMP_LIMIT) {
>>> +		dev_err(dev, "critical trip is over limit(>%d), or not set\n",
>>> +			CRITICAL_TEMP_LIMIT);
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	ret = devm_request_irq(dev, irq, uniphier_tm_alarm_handler,
>>> +			       0, "thermal", tdev);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/* enable sensor */
>>> +	uniphier_tm_enable_sensor(tdev);
>>> +
>>> +	platform_set_drvdata(pdev, tdev);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int uniphier_tm_remove(struct platform_device *pdev)
>>> +{
>>> +	struct uniphier_tm_dev *tdev = platform_get_drvdata(pdev);
>>> +
>>> +	/* disable sensor */
>>> +	uniphier_tm_disable_sensor(tdev);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct uniphier_tm_soc_data uniphier_pxs2_tm_data = {
>>> +	.map_base        = 0xe000,
>>> +	.block_base      = 0xe000,
>>> +	.tmod_setup_addr = 0xe904,
>>> +};
>>> +
>>> +static const struct uniphier_tm_soc_data uniphier_ld20_tm_data = {
>>> +	.map_base        = 0xe000,
>>> +	.block_base      = 0xe800,
>>> +	.tmod_setup_addr = 0xe938,
>>> +};
>>> +
>>> +static const struct of_device_id uniphier_tm_dt_ids[] = {
>>> +	{
>>> +		.compatible = "socionext,uniphier-pxs2-thermal",
>>> +		.data       = &uniphier_pxs2_tm_data,
>>> +	},
>>> +	{
>>> +		.compatible = "socionext,uniphier-ld20-thermal",
>>> +		.data       = &uniphier_ld20_tm_data,
>>> +	},
>>> +	{ /* sentinel */ }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids);
>>> +
>>> +static struct platform_driver uniphier_tm_driver = {
>>> +	.probe = uniphier_tm_probe,
>>> +	.remove = uniphier_tm_remove,
>>> +	.driver = {
>>> +		.name = "uniphier-thermal",
>>> +		.of_match_table = uniphier_tm_dt_ids,
>>> +	},
>>> +};
>>> +module_platform_driver(uniphier_tm_driver);
>>> +
>>> +MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>");
>>> +MODULE_DESCRIPTION("UniPhier thermal driver");
>>> +MODULE_LICENSE("GPL v2");
>>>
> 
> 
> Best Regards,
> Kunihiko Hayashi
> 
> 
>