Re: [PATCH v5 03/10] drm: Use new mode_valid() helpers in connector probe helper

[Neil Armstrong]

On 05/25/2017 04:19 PM, Jose Abreu wrote:
> This changes the connector probe helper function to use the new
> encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid()
> helper callbacks to validate the modes.
> 
> The new callbacks are optional so the behaviour remains the same
> if they are not implemented. If they are, then the code loops
> through all the connector's encodersXbridgesXcrtcs and calls the
> callback.
> 
> If at least a valid encoderXbridgeXcrtc combination is found which
> accepts the mode then the function returns MODE_OK.
> 
> Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
> Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Cc: Carlos Palminha <palminha@xxxxxxxxxxxx>
> Cc: Dave Airlie <airlied@xxxxxxxx>
> Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> 
> Changes v3->v4:
> 	- Change function name (Laurent)
> Changes v2->v3:
> 	- Call also bridge->mode_valid (Daniel)
> Changes v1->v2:
> 	- Use new helpers suggested by Ville
> 	- Change documentation (Daniel)
> 
> ---
>  drivers/gpu/drm/drm_probe_helper.c | 67 +++++++++++++++++++++++++++++++++++---
>  1 file changed, 63 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index f01abdc..00e6832 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -83,6 +83,61 @@
>  	return MODE_OK;
>  }
>  
> +static enum drm_mode_status
> +drm_mode_validate_pipeline(struct drm_display_mode *mode,
> +			    struct drm_connector *connector)
> +{
> +	struct drm_device *dev = connector->dev;
> +	uint32_t *ids = connector->encoder_ids;
> +	enum drm_mode_status ret = MODE_OK;
> +	unsigned int i;
> +
> +	/* Step 1: Validate against connector */
> +	ret = drm_connector_mode_valid(connector, mode);
> +	if (ret != MODE_OK)
> +		return ret;
> +
> +	/* Step 2: Validate against encoders and crtcs */
> +	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> +		struct drm_encoder *encoder = drm_encoder_find(dev, ids[i]);
> +		struct drm_crtc *crtc;
> +
> +		if (!encoder)
> +			continue;
> +
> +		ret = drm_encoder_mode_valid(encoder, mode);
> +		if (ret != MODE_OK) {
> +			/* No point in continuing for crtc check as this encoder
> +			 * will not accept the mode anyway. If all encoders
> +			 * reject the mode then, at exit, ret will not be
> +			 * MODE_OK. */
> +			continue;
> +		}
> +
> +		ret = drm_bridge_mode_valid(encoder->bridge, mode);
> +		if (ret != MODE_OK) {
> +			/* There is also no point in continuing for crtc check
> +			 * here. */
> +			continue;
> +		}
> +
> +		drm_for_each_crtc(crtc, dev) {
> +			if (!drm_encoder_crtc_ok(encoder, crtc))
> +				continue;
> +
> +			ret = drm_crtc_mode_valid(crtc, mode);
> +			if (ret == MODE_OK) {
> +				/* If we get to this point there is at least
> +				 * one combination of encoder+crtc that works
> +				 * for this mode. Lets return now. */
> +				return ret;
> +			}
> +		}
> +	}
> +
> +	return ret;
> +}
> +
>  static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
>  {
>  	struct drm_cmdline_mode *cmdline_mode;
> @@ -322,7 +377,11 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
>   *    - drm_mode_validate_flag() checks the modes against basic connector
>   *      capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
>   *    - the optional &drm_connector_helper_funcs.mode_valid helper can perform
> - *      driver and/or hardware specific checks
> + *      driver and/or sink specific checks
> + *    - the optional &drm_crtc_helper_funcs.mode_valid,
> + *      &drm_bridge_funcs.mode_valid and &drm_encoder_helper_funcs.mode_valid
> + *      helpers can perform driver and/or source specific checks which are also
> + *      enforced by the modeset/atomic helpers
>   *
>   * 5. Any mode whose status is not OK is pruned from the connector's modes list,
>   *    accompanied by a debug message indicating the reason for the mode's
> @@ -466,9 +525,9 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
>  		if (mode->status == MODE_OK)
>  			mode->status = drm_mode_validate_flag(mode, mode_flags);
>  
> -		if (mode->status == MODE_OK && connector_funcs->mode_valid)
> -			mode->status = connector_funcs->mode_valid(connector,
> -								   mode);
> +		if (mode->status == MODE_OK)
> +			mode->status = drm_mode_validate_pipeline(mode,
> +								  connector);
>  	}
>  
>  prune:
> 

Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>