[PATCH] i2c: at91: Handle return value of clk_prepare_enable

[Arvind Yadav]

clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
---
 drivers/i2c/busses/i2c-at91.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index fabbb9e..2525cd9 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -1083,12 +1083,16 @@ static int at91_twi_probe(struct platform_device *pdev)
 		dev_err(dev->dev, "no clock defined\n");
 		return -ENODEV;
 	}
-	clk_prepare_enable(dev->clk);
+	rc = clk_prepare_enable(dev->clk);
+	if (rc)
+		return rc;
 
 	if (dev->dev->of_node) {
 		rc = at91_twi_configure_dma(dev, phy_addr);
-		if (rc == -EPROBE_DEFER)
+		if (rc == -EPROBE_DEFER) {
+			clk_disable_unprepare(dev->clk);
 			return rc;
+		}
 	}
 
 	if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
-- 
1.9.1