[PATCH v6 09/21] arm: sun8i: orangepi-zero: Enable dwmac-sun8i

From: Corentin Labbe
Date: Wed May 31 2017 - 03:26:56 EST


The dwmac-sun8i hardware is present on the Orange PI Zero.
It uses the internal PHY.

This patch create the needed emac node.

Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
---
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index 9e8b082c134f..dd3525a0f06a 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -57,6 +57,7 @@
aliases {
serial0 = &uart0;
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+ ethernet0 = &emac;
ethernet1 = &xr819;
};

@@ -103,6 +104,13 @@
status = "okay";
};

+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
--
2.13.0