From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>Thanks a lot for this fix.
Fix NETDEV WATCHDOG timeout on startup by adding missing register
writes that properly setup SGMII.
Signed-off-by: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
index 489ef14..6a9c954 100644
--- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
@@ -37,6 +37,7 @@
#define TSE_PCS_CONTROL_AN_EN_MASK BIT(12)
#define TSE_PCS_CONTROL_REG 0x00
#define TSE_PCS_CONTROL_RESTART_AN_MASK BIT(9)
+#define TSE_PCS_CTRL_AUTONEG_SGMII 0x1140
#define TSE_PCS_IF_MODE_REG 0x28
#define TSE_PCS_LINK_TIMER_0_REG 0x24
#define TSE_PCS_LINK_TIMER_1_REG 0x26
@@ -65,6 +66,7 @@
#define TSE_PCS_SW_RESET_TIMEOUT 100
#define TSE_PCS_USE_SGMII_AN_MASK BIT(1)
#define TSE_PCS_USE_SGMII_ENA BIT(0)
+#define TSE_PCS_IF_USE_SGMII 0x03
#define SGMII_ADAPTER_CTRL_REG 0x00
#define SGMII_ADAPTER_DISABLE 0x0001
@@ -101,7 +103,9 @@ int tse_pcs_init(void __iomem *base, struct tse_pcs *pcs)
{
int ret = 0;
- writew(TSE_PCS_USE_SGMII_ENA, base + TSE_PCS_IF_MODE_REG);
+ writew(TSE_PCS_IF_USE_SGMII, base + TSE_PCS_IF_MODE_REG);
+
+ writew(TSE_PCS_CTRL_AUTONEG_SGMII, base + TSE_PCS_CONTROL_REG);
writew(TSE_PCS_SGMII_LINK_TIMER_0, base + TSE_PCS_LINK_TIMER_0_REG);
writew(TSE_PCS_SGMII_LINK_TIMER_1, base + TSE_PCS_LINK_TIMER_1_REG);