[PATCH 3.2 067/101] ALSA: ctxfi: Fallback DMA mask to 32bit

[Ben Hutchings]

3.2.89-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@xxxxxxx>

commit 15c75b09f8d190f89ab4db463b87d411ca349dfe upstream.

Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit
architectures, and bails out if it fails.  This causes a problem on
some platforms since the 64bit DMA isn't always guaranteed.  We should
fall back to the default 32bit DMA when 64bit DMA fails.

Fixes: 6d74b86d3c0f ("ALSA: ctxfi - Allow 64bit DMA")
Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
[bwh: Backported to 3.2:
 - Old code was using PCI DMA mask functions
 - Deleted error message was different]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
--- a/sound/pci/ctxfi/cthw20k1.c
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -27,12 +27,6 @@
 #include "cthw20k1.h"
 #include "ct20k1reg.h"
 
-#if BITS_PER_LONG == 32
-#define CT_XFI_DMA_MASK		DMA_BIT_MASK(32) /* 32 bit PTE */
-#else
-#define CT_XFI_DMA_MASK		DMA_BIT_MASK(64) /* 64 bit PTE */
-#endif
-
 struct hw20k1 {
 	struct hw hw;
 	spinlock_t reg_20k1_lock;
@@ -1903,19 +1897,18 @@ static int hw_card_start(struct hw *hw)
 {
 	int err;
 	struct pci_dev *pci = hw->pci;
+	const unsigned int dma_bits = BITS_PER_LONG;
 
 	err = pci_enable_device(pci);
 	if (err < 0)
 		return err;
 
 	/* Set DMA transfer mask */
-	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
-	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
-		printk(KERN_ERR "architecture does not support PCI "
-				"busmaster DMA with mask 0x%llx\n",
-		       CT_XFI_DMA_MASK);
-		err = -ENXIO;
-		goto error1;
+	if (dma_set_mask(&pci->dev, DMA_BIT_MASK(dma_bits))) {
+		dma_set_coherent_mask(&pci->dev, DMA_BIT_MASK(dma_bits));
+	} else {
+		dma_set_mask(&pci->dev, DMA_BIT_MASK(32));
+		dma_set_coherent_mask(&pci->dev, DMA_BIT_MASK(32));
 	}
 
 	if (!hw->io_base) {
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -26,12 +26,6 @@
 #include "cthw20k2.h"
 #include "ct20k2reg.h"
 
-#if BITS_PER_LONG == 32
-#define CT_XFI_DMA_MASK		DMA_BIT_MASK(32) /* 32 bit PTE */
-#else
-#define CT_XFI_DMA_MASK		DMA_BIT_MASK(64) /* 64 bit PTE */
-#endif
-
 struct hw20k2 {
 	struct hw hw;
 	/* for i2c */
@@ -2026,18 +2020,18 @@ static int hw_card_start(struct hw *hw)
 	int err = 0;
 	struct pci_dev *pci = hw->pci;
 	unsigned int gctl;
+	const unsigned int dma_bits = BITS_PER_LONG;
 
 	err = pci_enable_device(pci);
 	if (err < 0)
 		return err;
 
 	/* Set DMA transfer mask */
-	if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
-	    pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
-		printk(KERN_ERR "ctxfi: architecture does not support PCI "
-		"busmaster DMA with mask 0x%llx\n", CT_XFI_DMA_MASK);
-		err = -ENXIO;
-		goto error1;
+	if (!dma_set_mask(&pci->dev, DMA_BIT_MASK(dma_bits))) {
+		dma_set_coherent_mask(&pci->dev, DMA_BIT_MASK(dma_bits));
+	} else {
+		dma_set_mask(&pci->dev, DMA_BIT_MASK(32));
+		dma_set_coherent_mask(&pci->dev, DMA_BIT_MASK(32));
 	}
 
 	if (!hw->io_base) {