[PATCH v3 13/17] ASoC: madera: Add DT bindings for Cirrus Logic Madera codecs

[Richard Fitzgerald]

The Cirrus Logic Madera codecs are a family of related codecs with
extensive digital and analogue I/O, digital mixing and routing,
signal processing and programmable DSPs.

Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
Changes since V2:
- Edits to take account of removing the child driver node and moving these
  bindings to be part of the parent MFD node
- Improve descriptions of dmic-ref and inmode
- Changed example to use defined constants instead of magic numbers

 Documentation/devicetree/bindings/sound/madera.txt | 67 ++++++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/madera.txt

diff --git a/Documentation/devicetree/bindings/sound/madera.txt b/Documentation/devicetree/bindings/sound/madera.txt
new file mode 100644
index 0000000..1114fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/madera.txt
@@ -0,0 +1,67 @@
+Cirrus Logic Madera class audio codecs
+
+This describes audio configuration bindings for these codecs.
+
+See also the core bindings for the parent MFD driver:
+See Documentation/devicetree/bindings/mfd/madera.txt
+
+and defines for values used in these bindings:
+include/dt-bindings/sound/madera.h
+
+These properties are all contained in the parent MFD node.
+
+Optional properties:
+  - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally
+    connected to DMICs on each input, one cell per input.
+    <IN1 IN2 IN3 ...>
+    A value of 0 indicates MICVDD and is the default, other values depend on the
+    codec:
+    For CS47L35 one of the CS47L35_DMIC_REF_xxx values
+    For all other codecs one of the MADERA_DMIC_REF_xxx values
+    Also see the datasheet for a description of the INn_DMIC_SUP field.
+
+  - cirrus,inmode : A list of input mode settings for each input. A maximum of
+    16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR.
+    For non-muxed inputs the first two cells for that input set the mode for
+    the left and right channel and the second two cells must be 0.
+    For muxed inputs the first two cells for that input set the mode of the
+    left and right A inputs and the second two cells set the mode of the left
+    and right B inputs.
+    Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter
+    than the number of inputs the unspecified inputs default to
+    MADERA_INMODE_DIFF.
+
+  - cirrus,out-mono : Mono bit for each output, must contain six cells if
+    specified. A non-zero value indicates the corresponding output is mono.
+
+  - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks
+    will be generated for. Useful when clock master for systems where the I2S
+    bus has multiple data lines.
+    One cell for each AIF, use a value of zero for AIFs that should be handled
+    normally.
+
+  - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells
+    (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a
+    description of this value.
+    The second cell is ignored for codecs that do not have OUT6.
+
+  - cirrus,pdm-mute : PDM mute format, must contain 2 cells
+    (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a
+    description of this value.
+    The second cell is ignored for codecs that do not have OUT6.
+
+Example:
+
+cs47l35@0 {
+	compatible = "cirrus,cs47l35";
+
+	cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>;
+	cirrus,inmode = <
+		MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */
+		MADERA_INMODE_SE   MADERA_INMODE_SE   /* IN1B single-ended */
+		MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */
+		0 0 	/* not used on this codec */
+	>;
+	cirrus,out-mono = <0 0 0 0 0 0>;
+	cirrus,max-channels-clocked = <2 0 0>;
+};
-- 
1.9.1