Re: [PATCH] clk: Re-evaluate clock rate on min/max update

[Stephen Boyd]

On 06/02, Peter De Schrijver wrote:
> On Thu, Jun 01, 2017 at 02:12:51AM -0700, Stephen Boyd wrote:
> > On 04/13, Peter De Schrijver wrote:
> > > On Wed, Apr 12, 2017 at 09:46:05AM -0700, Stephen Boyd wrote:
> > > > On 03/21, Peter De Schrijver wrote:
> > > 
> > > No. But I do rely on the rate setting op to be called when a new min or max
> > > rate would cause the rate to be changed even when there is no new rate request.
> > > 
> > > Eg:
> > > 
> > > min = 100MHz, max = 500MHz, current rate request is 400MHz, then max changes to
> > > 300MHz. Today the rate setting op will not be called, while I think it should
> > > be called to lower the rate to 300MHz.
> > 
> > Ok. Can you please describe the sequence in more detail? What is
> > core::req_rate when the clk is registered? What is the rate of
> > the clk when the first rate is set?
> > 
> 
> 1) req_rate at registration time is the current rate of the clk: 100MHz
> 2) clk_set_rate sets req_rate to 400MHz, set_rate clk op is called to change
>    the rate
> 3) clk_set_min_rate is called with 100MHz, req_rate is 400MHz, no clock
>    operations are called
> 4) clk_set_max_rate is called with 500MHz, req_rate is 400Mhz, no clock
>    operations are called
> 5) clk_set_max_rate is called with 300MHz, req_rate is 400Mhz, no clock
>    operations are called because req_rate didn't change. This however is
>    wrong IMO. the set_rate op should be called to lower the clock rate
>    to 300MHz.

Thanks. Makes sense!

> 
> > Because I have a maintainer tag on commit 1c8e600440c of
> > [sboyd@xxxxxxxxxxxxxx: set req_rate in __clk_init] which may be a
> > problem if the clk is orphaned when registered and thus req_rate
> > is totally bogus because we can't calculate the rate[1].
> > 
> > We will need to only set req_rate when a clk is actually parented
> > to something, urgh. But that definitely doesn't look to even be
> 
> The same happens for core::rate, however core::rate is updated by
> __clk_recalc_rates when the parent appears. We should update req_rate
> as well then. However this can't be done easily it seems because
> __clk_recalc_rates is also called in other cases (eg when reparenting).
> In theory updating req_rate when 'reparenting' from orphan to the real
> parent would cause an existing req_rate to be discarded. However I don't
> think we should allow any calls by consumers to orphaned clocks, because
> this clearly is an inconsistent state. In practice all clocks are properly
> parented by the time the consumers are starting to make calls to CCF. So
> this should not cause any problem.

Right. Reminds me. I need to merge that probe defer orphans patch
now.

> 
> > the bug you're talking about. From what I can tell, the whole
> > design is borked, because nobody has really used or tested this
> > code! We should really be making sure that a clk range request
> 
> I'm trying to use it now :)
> 
> > doesn't become disjoint from other consumer requests. If it does,
> > it will be unsatisfiable. Furthermore, we should remove the
> > min/max constraints on failure out of set_rate() because it
> > didn't work.
> > 
> > We have req_rate there to make sure we bring the clk rate back to
> > within some range when a constraint goes away, but we should
> > probably just evaluate the constraints before calling
> > clk_core_set_rate_nolock() and then clamp the req_rate to within
> > the min/max that we determine, leaning toward the lowest rate.
> > That's sort of what you're doing here, but we lost the check to
> > make sure we don't call the set_rate op with the same rate we
> > already have. I'd prefer we maintain that part of the code even
> > for rate constraints.
> > 
> 
> 
> Ok. I will rework the patch to avoid calling set_rate with the current rate.
> 

Thanks.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project