Re: [PATCH] iio: Aspeed ADC - Handle return value of clk_prepare_enable

[Jonathan Cameron]

On Mon, 29 May 2017 13:12:12 +0530
Arvind Yadav <arvind.yadav.cs@xxxxxxxxx> wrote:

> clk_prepare_enable() can fail here and we must check its return value.
> 
> Signed-off-by: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
Please make sure to cc the driver author.  This is a fairly new
driver, so chances are Rick will still be answering this email
address.

Patch looks fine to me, but I would like to give Rick the opportunity
to respond.

Jonathan
> ---
>  drivers/iio/adc/aspeed_adc.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> index 62670cb..e0ea411 100644
> --- a/drivers/iio/adc/aspeed_adc.c
> +++ b/drivers/iio/adc/aspeed_adc.c
> @@ -212,7 +212,10 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  	}
>  
>  	/* Start all channels in normal mode. */
> -	clk_prepare_enable(data->clk_scaler->clk);
> +	ret = clk_prepare_enable(data->clk_scaler->clk);
> +	if (ret)
> +		goto clk_enable_error;
> +
>  	adc_engine_control_reg_val = GENMASK(31, 16) |
>  		ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE;
>  	writel(adc_engine_control_reg_val,
> @@ -236,6 +239,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  	writel(ASPEED_OPERATION_MODE_POWER_DOWN,
>  		data->base + ASPEED_REG_ENGINE_CONTROL);
>  	clk_disable_unprepare(data->clk_scaler->clk);
> +clk_enable_error:
>  	clk_hw_unregister_divider(data->clk_scaler);
>  
>  scaler_error: