Re: [PATCH v6 00/11] Broadcom Stingray SOC Initial Support

[Florian Fainelli]

On 06/01/2017 11:34 PM, Anup Patel wrote:
> This patchset adds initial support of Broadcom Stingray SOC
> by reusing existing Broadcom iProc device drivers.
> 
> Most of the patches in this patchset are DT patches except
> the Stingray clock tree support which just one patch.
> 
> This patchset is based on Linux-4.12-rc3 and it is also available
> at stingray-v6 branch of https://github.com/Broadcom/arm64-linux.git
> 
> Changes since v5:
>  - Rebased patches for Linux-4.12-rc3
>  - Update DT node names to match register offset
> 
> Changes since v4:
>  - Reduce number of include headers in Stingray clk driver
> 
> Changes since v3:
>  - Rebased patches for Linux-4.12-rc1
>  - Updated PATCH3 to have all clocks except genpll3 to be
>    registered via platform driver probe
> 
> Changes since v2:
>  - Remove default bootargs from chosen DT node
>  - Remove "linux" prefix from stdout DT attribute of chosen DT node
>  - Remove use of GIC_CPU_MASK_xxx() for PPIs
> 
> Changes since v1:
>  - Rebased patches for Linux-4.12-rc1
>  - Removed unwanted /memreserve/ from bcm958742-base.dtsi
>  - Use ranges DT property to clear view of memory-layout
>  - Make bcm-sr.h part of clock DT bindings patch
> 
> Anup Patel (3):
>   dt-bindings: bcm: Add Broadcom Stingray bindings document
>   arm64: dts: Initial DTS files for Broadcom Stingray SOC
>   arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
> 
> Oza Pawandeep (1):
>   arm64: dts: Add I2C DT nodes for Stingray SoC
> 
> Pramod Kumar (3):
>   arm64: dts: Add NAND DT nodes for Stingray SOC
>   arm64: dts: Add pinctrl DT nodes for Stingray SOC
>   arm64: dts: Add GPIO DT nodes for Stingray SOC
> 
> Sandeep Tripathy (3):
>   dt-bindings: clk: Extend binding doc for Stingray SOC
>   clk: bcm: Add clocks for Stingray SOC
>   arm64: dts: Add clock DT nodes for Stingray SOC
> 
> Srinath Mannam (1):
>   arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC

Applied patches 1, 4-11 to devicetree-arm64/next, thanks!
--
Florian

-- 
Florian