Re: [PATCH 10/17] irqchip: New RISC-V PLIC Driver
From: Arnd Bergmann
Date: Wed Jun 07 2017 - 03:55:39 EST
On Wed, Jun 7, 2017 at 9:13 AM, Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>> +struct plic_enable_context {
>> + atomic_t mask[32]; // 32-bit * 32-entry
>> +};
You use many '//' style comments in this file, please change them all to '/* */'
for consistency with kernel coding style.
>> +
>> +struct plic_priority {
>> + u32 prio[MAX_DEVICES];
>> +};
>> +
>> +struct plic_data {
>> + struct irq_chip chip;
>> + struct irq_domain *domain;
>> + u32 ndev;
>> + void __iomem *reg;
>> + int handlers;
>> + struct plic_handler *handler;
>> + char name[30];
>> +};
>> +
>> +struct plic_handler {
>> + struct plic_hart_context *context;
>> + struct plic_data *data;
>> +};
>> +
>> +static inline
>> +struct plic_hart_context *plic_hart_context(struct plic_data *data, size_t i)
>> +{
>> + return (struct plic_hart_context *)((char *)data->reg + HART_BASE + HART_SIZE*i);
>> +}
'data->reg' is an __iomem pointer, so when you build-test this with 'make C=1',
you should get a valid warning from sparse about an address space mismatch.
Please address all the warning from sparse.
>> +static void plic_disable(struct plic_data *data, int i, int hwirq)
>> +{
>> + struct plic_enable_context *enable = plic_enable_context(data, i);
>> +
>> + atomic_and(~(1 << (hwirq % 32)), &enable->mask[hwirq / 32]);
>> +}
In particular, you must not do atomic operations on MMIO pointers.
On most architectures these are explicitly disallowed and trap for
a good reason, as the hardware implementation behind atomics tend
to rely on the cache controller, while mmio registers are required
to be uncached.
>> + iowrite32(1, &priority->prio[d->hwirq]);
I would normally use 'readl' instead of 'iowrite32'. They may be the same
on riscv, but they have slightly different meaning in portable drivers.
Arnd