[PATCH 11/15] spi: qup: allow block mode to generate multiple transactions

From: Varadarajan Narayanan
Date: Fri Jun 16 2017 - 05:00:01 EST


This let's you write more to the SPI bus than 64K-1 which is important
if the block size of a SPI device is >= 64K or some other device wants
to do something larger.

This has the benefit of completely removing spi_message from the spi-qup
transactions

Signed-off-by: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
---
drivers/spi/spi-qup.c | 125 +++++++++++++++++++++++++++++++-------------------
1 file changed, 79 insertions(+), 46 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index ac85969..e6a43df 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -120,7 +120,7 @@

#define SPI_NUM_CHIPSELECTS 4

-#define SPI_MAX_DMA_XFER (SZ_64K - 64)
+#define SPI_MAX_XFER (SZ_64K - 64)

/* high speed mode is when bus rate is greater then 26MHz */
#define SPI_HS_MIN_RATE 26000000
@@ -151,6 +151,8 @@ struct spi_qup {
int n_words;
int tx_bytes;
int rx_bytes;
+ const u8 *tx_buf;
+ u8 *rx_buf;
int qup_v1;

int mode;
@@ -175,6 +177,12 @@ static inline bool spi_qup_is_dma_xfer(int mode)
return false;
}

+/* get's the transaction size length */
+static inline unsigned int spi_qup_len(struct spi_qup *controller)
+{
+ return controller->n_words * controller->w_size;
+}
+
static inline bool spi_qup_is_valid_state(struct spi_qup *controller)
{
u32 opstate = readl_relaxed(controller->base + QUP_STATE);
@@ -227,10 +235,9 @@ static int spi_qup_set_state(struct spi_qup *controller, u32 state)
return 0;
}

-static void spi_qup_read_from_fifo(struct spi_qup *controller,
- struct spi_transfer *xfer, u32 num_words)
+static void spi_qup_read_from_fifo(struct spi_qup *controller, u32 num_words)
{
- u8 *rx_buf = xfer->rx_buf;
+ u8 *rx_buf = controller->rx_buf;
int i, shift, num_bytes;
u32 word;

@@ -238,8 +245,9 @@ static void spi_qup_read_from_fifo(struct spi_qup *controller,

word = readl_relaxed(controller->base + QUP_INPUT_FIFO);

- num_bytes = min_t(int, xfer->len - controller->rx_bytes,
- controller->w_size);
+ num_bytes = min_t(int, spi_qup_len(controller) -
+ controller->rx_bytes,
+ controller->w_size);

if (!rx_buf) {
controller->rx_bytes += num_bytes;
@@ -260,13 +268,12 @@ static void spi_qup_read_from_fifo(struct spi_qup *controller,
}
}

-static void spi_qup_read(struct spi_qup *controller,
- struct spi_transfer *xfer)
+static void spi_qup_read(struct spi_qup *controller)
{
u32 remainder, words_per_block, num_words;
bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;

- remainder = DIV_ROUND_UP(xfer->len - controller->rx_bytes,
+ remainder = DIV_ROUND_UP(spi_qup_len(controller) - controller->rx_bytes,
controller->w_size);
words_per_block = controller->in_blk_sz >> 2;

@@ -287,7 +294,7 @@ static void spi_qup_read(struct spi_qup *controller,
}

/* read up to the maximum transfer size available */
- spi_qup_read_from_fifo(controller, xfer, num_words);
+ spi_qup_read_from_fifo(controller, num_words);

remainder -= num_words;

@@ -309,18 +316,18 @@ static void spi_qup_read(struct spi_qup *controller,

}

-static void spi_qup_write_to_fifo(struct spi_qup *controller,
- struct spi_transfer *xfer, u32 num_words)
+static void spi_qup_write_to_fifo(struct spi_qup *controller, u32 num_words)
{
- const u8 *tx_buf = xfer->tx_buf;
+ const u8 *tx_buf = controller->tx_buf;
int i, num_bytes;
u32 word, data;

for (; num_words; num_words--) {
word = 0;

- num_bytes = min_t(int, xfer->len - controller->tx_bytes,
- controller->w_size);
+ num_bytes = min_t(int, spi_qup_len(controller) -
+ controller->tx_bytes,
+ controller->w_size);
if (tx_buf)
for (i = 0; i < num_bytes; i++) {
data = tx_buf[controller->tx_bytes + i];
@@ -338,13 +345,12 @@ static void spi_qup_dma_done(void *data)
complete(data);
}

-static void spi_qup_write(struct spi_qup *controller,
- struct spi_transfer *xfer)
+static void spi_qup_write(struct spi_qup *controller)
{
bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
u32 remainder, words_per_block, num_words;

- remainder = DIV_ROUND_UP(xfer->len - controller->tx_bytes,
+ remainder = DIV_ROUND_UP(spi_qup_len(controller) - controller->tx_bytes,
controller->w_size);
words_per_block = controller->out_blk_sz >> 2;

@@ -364,7 +370,7 @@ static void spi_qup_write(struct spi_qup *controller,
num_words = 1;
}

- spi_qup_write_to_fifo(controller, xfer, num_words);
+ spi_qup_write_to_fifo(controller, num_words);

remainder -= num_words;

@@ -469,36 +475,62 @@ static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
{
struct spi_master *master = spi->master;
struct spi_qup *qup = spi_master_get_devdata(master);
- int ret;
+ int ret, n_words, iterations, offset = 0;

- ret = spi_qup_io_config(spi, xfer);
- if (ret)
- return ret;
+ n_words = qup->n_words;
+ iterations = n_words / SPI_MAX_XFER; /* round down */
+ qup->rx_buf = xfer->rx_buf;
+ qup->tx_buf = xfer->tx_buf;

- ret = spi_qup_set_state(qup, QUP_STATE_RUN);
- if (ret) {
- dev_warn(qup->dev, "%s(%d): cannot set RUN state\n");
- return ret;
- }
+ do {
+ if (iterations)
+ qup->n_words = SPI_MAX_XFER;
+ else
+ qup->n_words = n_words % SPI_MAX_XFER;

- ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
- if (ret) {
- dev_warn(qup->dev, "%s(%d): cannot set PAUSE state\n");
- return ret;
- }
+ if (qup->tx_buf && offset)
+ qup->tx_buf = xfer->tx_buf + offset * SPI_MAX_XFER;

- if (qup->mode == QUP_IO_M_MODE_FIFO)
- spi_qup_write(qup, xfer);
+ if (qup->rx_buf && offset)
+ qup->rx_buf = xfer->rx_buf + offset * SPI_MAX_XFER;

- ret = spi_qup_set_state(qup, QUP_STATE_RUN);
- if (ret) {
- dev_warn(qup->dev, "%s(%d): cannot set RUN state\n");
- return ret;
- }
+ /*
+ * if the transaction is small enough, we need
+ * to fallback to FIFO mode
+ */
+ if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
+ qup->mode = QUP_IO_M_MODE_FIFO;

- if (!wait_for_completion_timeout(&qup->done, timeout))
- return -ETIMEDOUT;
+ ret = spi_qup_io_config(spi, xfer);
+ if (ret)
+ return ret;
+
+ ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+ if (ret) {
+ dev_warn(qup->dev, "cannot set RUN state\n");
+ return ret;
+ }
+
+ ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
+ if (ret) {
+ dev_warn(qup->dev, "cannot set PAUSE state\n");
+ return ret;
+ }
+
+ if (qup->mode == QUP_IO_M_MODE_FIFO)
+ spi_qup_write(qup);
+
+ ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+ if (ret) {
+ dev_warn(qup->dev, "cannot set RUN state\n");
+ return ret;
+ }
+
+ if (!wait_for_completion_timeout(&qup->done, timeout))
+ return -ETIMEDOUT;

+ offset++;
+ } while (iterations--);
return 0;
}

@@ -541,10 +573,10 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
} else {
if (opflags & QUP_OP_IN_SERVICE_FLAG)
- spi_qup_read(controller, xfer);
+ spi_qup_read(controller);

if (opflags & QUP_OP_OUT_SERVICE_FLAG)
- spi_qup_write(controller, xfer);
+ spi_qup_write(controller);
}

if ((opflags & QUP_OP_MAX_INPUT_DONE_FLAG) || error)
@@ -754,7 +786,8 @@ static int spi_qup_transfer_one(struct spi_master *master,
return ret;

timeout = DIV_ROUND_UP(xfer->speed_hz, MSEC_PER_SEC);
- timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
+ timeout = DIV_ROUND_UP(min_t(unsigned long, SPI_MAX_XFER,
+ xfer->len) * 8, timeout);
timeout = 100 * msecs_to_jiffies(timeout);

if (spi_qup_is_dma_xfer(controller->mode))
@@ -959,7 +992,7 @@ static int spi_qup_probe(struct platform_device *pdev)
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
master->dma_alignment = dma_get_cache_alignment();
- master->max_dma_len = SPI_MAX_DMA_XFER;
+ master->max_dma_len = SPI_MAX_XFER;

platform_set_drvdata(pdev, master);

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation