[PATCH 1/8] dt-bindings: mfd: Add STM32 LPTimer binding

[Fabrice Gasnier]

Add documentation for STMicroelectronics STM32 Low Power Timer binding.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
 .../devicetree/bindings/mfd/stm32-lptimer.txt      | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/stm32-lptimer.txt

diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
new file mode 100644
index 0000000..237b7d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
@@ -0,0 +1,51 @@
+STMicroelectronics STM32 Low Power Timer
+
+The STM32 Low Power Timer (LPTIM) is a 16-bit timer that provides several
+functionalities:
+- PWM output (with programmable prescaler, configurable polarity)
+- Quadrature encoder, counter
+- Trigger source for STM32 ADC/DAC (LPTIM_OUT)
+
+Required properties:
+- compatible: Must be "st,stm32-lptimer".
+- reg: Offset and length of the device's register set.
+- clocks: Phandle to the clock used by the LP Timer module.
+- clock-names: Must be "int".
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- resets: Must contain the phandle to the reset controller.
+
+Optional subnodes:
+- pwm: See ../pwm/pwm-stm32-lp.txt
+- counter: See ../iio/timer/stm32-lptimer-cnt.txt
+- trigger: See ../iio/timer/stm32-lptimer-trigger.txt
+
+Example:
+
+	lptimer1: lptimer@0x40002400 {
+		compatible = "st,stm32-lptimer";
+		reg = <0x40002400 0x400>;
+		clocks = <&timer_clk>;
+		clock-names = "int";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwm {
+			compatible = "st,stm32-pwm-lp";
+			pinctrl-names = "default";
+			pinctrl-0 = <&lppwm1_pins>;
+		};
+
+		trigger@0 {
+			compatible = "st,stm32-lptimer-trigger";
+			reg = <0>;
+		};
+
+		counter {
+			compatible = "st,stm32-lptimer-counter";
+			pinctrl-names = "default";
+			pinctrl-0 = <&lptim1_in_pins>;
+		};
+	};
-- 
1.9.1