Re: [PATCH 04/29] printk-formats.txt: standardize document format

[Mauro Carvalho Chehab]

Em Fri, 19 May 2017 16:37:34 -0700
Randy Dunlap <rdunlap@xxxxxxxxxxxxx> escreveu:

> On 05/19/17 13:28, Mauro Carvalho Chehab wrote:
> > Em Fri, 19 May 2017 03:26:08 -0700
> > Joe Perches <joe@xxxxxxxxxxx> escreveu:
> >   
> >> On Thu, 2017-05-18 at 22:25 -0300, Mauro Carvalho Chehab wrote:  
> >>> Each text file under Documentation follows a different
> >>> format. Some doesn't even have titles!
> >>>
> >>> Change its representation to follow the adopted standard,
> >>> using ReST markups for it to be parseable by Sphinx:
> >>>
> >>> - add a title for the document;
> >>> - add markups for section titles;
> >>> - move authorship to the beginning and use :Author:;
> >>> - use right markup for tables;
> >>> - mark literals and literal blocks.    
> >>
> >> I think the .rst markup is far uglier to read as text
> >> and harder to modify for new additions to %p<foo>
> >> given column alignments.
> >>
> >> For instance below, but other than that, the .rst
> >> is easier to read.
> >>  
> >>> diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt    
> >> []  
> >>> @@ -1,139 +1,180 @@
> >>> -If variable is of Type,		use printk format specifier:
> >>> ----------------------------------------------------------
> >>> -		int			%d or %x
> >>> -		unsigned int		%u or %x
> >>> -		long			%ld or %lx
> >>> -		unsigned long		%lu or %lx
> >>> -		long long		%lld or %llx
> >>> -		unsigned long long	%llu or %llx
> >>> -		size_t			%zu or %zx
> >>> -		ssize_t			%zd or %zx
> >>> -		s32			%d or %x
> >>> -		u32			%u or %x
> >>> -		s64			%lld or %llx
> >>> -		u64			%llu or %llx    
> >> []  
> >>> +======================= ===========================
> >>> +If variable is of Type	use printk format specifier
> >>> +======================= ===========================
> >>> +``int``			``%d or %x``
> >>> +``unsigned int``	``%u or %x``
> >>> +``long``		``%ld or %lx``
> >>> +``unsigned long``	``%lu or %lx``
> >>> +``long long``		``%lld or %llx``
> >>> +``unsigned long long``	``%llu or %llx``
> >>> +``size_t``		``%zu or %zx``
> >>> +``ssize_t``		``%zd or %zx``
> >>> +``s32``			``%d or %x``
> >>> +``u32``			``%u or %x``
> >>> +``s64``			``%lld or %llx``
> >>> +``u64``			``%llu or %llx``
> >>> +======================= ===========================    
> > 
> > Well, we could,instead, use literal blocks, e. g. something like:
> > 
> > ::
> > 
> >  -If variable is of Type,		use printk format specifier:
> >  ----------------------------------------------------------
> >  -		int			%d or %x
> >  -		unsigned int		%u or %x
> >  -		long			%ld or %lx
> >  -		unsigned long		%lu or %lx
> >  -		long long		%lld or %llx
> >  -		unsigned long long	%llu or %llx
> >  -		size_t			%zu or %zx
> >  -		ssize_t			%zd or %zx
> >  -		s32			%d or %x
> >  -		u32			%u or %x
> >  -		s64			%lld or %llx
> >  -		u64			%llu or %llx  
> >   
> 
> I like that latter option.
> 
> thanks.

Sorry for taking so long to return to this thread... got sidetracked by two
trips.

Changed to avoid adding that many literal escaping sequences.
The end result, in HTML format is at:
	https://www.infradead.org/~mchehab/kernel_docs/unsorted/printk-formats.html

Patch enclosed.

Regards,
Mauro

-


[PATCH] printk-formats.txt: standardize document format

Each text file under Documentation follows a different
format. Some doesn't even have titles!

Change its representation to follow the adopted standard,
using ReST markups for it to be parseable by Sphinx:

- add a title for the document;
- add markups for section titles;
- move authorship to the beginning and use :Author:;
- use right markup for tables;
- mark literals and literal blocks.

Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>

diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt
index 5962949944fd..7824f8442ec4 100644
--- a/Documentation/printk-formats.txt
+++ b/Documentation/printk-formats.txt
@@ -1,5 +1,18 @@
-If variable is of Type,		use printk format specifier:
----------------------------------------------------------
+=========================================
+How to get printk format specifiers right
+=========================================
+
+:Author: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
+:Author: Andrew Murray <amurray@xxxxxxxxxxxxxx>
+
+
+Integer types
+=============
+
+::
+
+	If variable is of Type,		use printk format specifier:
+	------------------------------------------------------------
 		int			%d or %x
 		unsigned int		%u or %x
 		long			%ld or %lx
@@ -13,25 +26,29 @@ If variable is of Type,		use printk format specifier:
 		s64			%lld or %llx
 		u64			%llu or %llx
 
-If <type> is dependent on a config option for its size (e.g., sector_t,
-blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a
-format specifier of its largest possible type and explicitly cast to it.
-Example:
+If <type> is dependent on a config option for its size (e.g., ``sector_t``,
+``blkcnt_t``) or is architecture-dependent for its size (e.g., ``tcflag_t``),
+use a format specifier of its largest possible type and explicitly cast to it.
+
+Example::
 
 	printk("test: sector number/total blocks: %llu/%llu\n",
 		(unsigned long long)sector, (unsigned long long)blockcount);
 
-Reminder: sizeof() result is of type size_t.
+Reminder: ``sizeof()`` result is of type ``size_t``.
 
-The kernel's printf does not support %n. For obvious reasons, floating
-point formats (%e, %f, %g, %a) are also not recognized. Use of any
+The kernel's printf does not support ``%n``. For obvious reasons, floating
+point formats (``%e, %f, %g, %a``) are also not recognized. Use of any
 unsupported specifier or length qualifier results in a WARN and early
 return from vsnprintf.
 
 Raw pointer value SHOULD be printed with %p. The kernel supports
 the following extended format specifiers for pointer types:
 
-Symbols/Function Pointers:
+Symbols/Function Pointers
+=========================
+
+::
 
 	%pF	versatile_init+0x0/0x110
 	%pf	versatile_init
@@ -41,99 +58,122 @@ Symbols/Function Pointers:
 	%ps	versatile_init
 	%pB	prev_fn_of_versatile_init+0x88/0x88
 
-	For printing symbols and function pointers. The 'S' and 's' specifiers
-	result in the symbol name with ('S') or without ('s') offsets. Where
-	this is used on a kernel without KALLSYMS - the symbol address is
-	printed instead.
+For printing symbols and function pointers. The ``S`` and ``s`` specifiers
+result in the symbol name with (``S``) or without (``s``) offsets. Where
+this is used on a kernel without KALLSYMS - the symbol address is
+printed instead.
+
+The ``B`` specifier results in the symbol name with offsets and should be
+used when printing stack backtraces. The specifier takes into
+consideration the effect of compiler optimisations which may occur
+when tail-call``s are used and marked with the noreturn GCC attribute.
 
-	The 'B' specifier results in the symbol name with offsets and should be
-	used when printing stack backtraces. The specifier takes into
-	consideration the effect of compiler optimisations which may occur
-	when tail-call's are used and marked with the noreturn GCC attribute.
+On ia64, ppc64 and parisc64 architectures function pointers are
+actually function descriptors which must first be resolved. The ``F`` and
+``f`` specifiers perform this resolution and then provide the same
+functionality as the ``S`` and ``s`` specifiers.
 
-	On ia64, ppc64 and parisc64 architectures function pointers are
-	actually function descriptors which must first be resolved. The 'F' and
-	'f' specifiers perform this resolution and then provide the same
-	functionality as the 'S' and 's' specifiers.
+Kernel Pointers
+===============
 
-Kernel Pointers:
+::
 
 	%pK	0x01234567 or 0x0123456789abcdef
 
-	For printing kernel pointers which should be hidden from unprivileged
-	users. The behaviour of %pK depends on the kptr_restrict sysctl - see
-	Documentation/sysctl/kernel.txt for more details.
+For printing kernel pointers which should be hidden from unprivileged
+users. The behaviour of ``%pK`` depends on the ``kptr_restrict sysctl`` - see
+Documentation/sysctl/kernel.txt for more details.
 
-Struct Resources:
+Struct Resources
+================
+
+::
 
 	%pr	[mem 0x60000000-0x6fffffff flags 0x2200] or
 		[mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
 	%pR	[mem 0x60000000-0x6fffffff pref] or
 		[mem 0x0000000060000000-0x000000006fffffff pref]
 
-	For printing struct resources. The 'R' and 'r' specifiers result in a
-	printed resource with ('R') or without ('r') a decoded flags member.
-	Passed by reference.
+For printing struct resources. The ``R`` and ``r`` specifiers result in a
+printed resource with (``R``) or without (``r``) a decoded flags member.
+Passed by reference.
+
+Physical addresses types ``phys_addr_t``
+========================================
 
-Physical addresses types phys_addr_t:
+::
 
 	%pa[p]	0x01234567 or 0x0123456789abcdef
 
-	For printing a phys_addr_t type (and its derivatives, such as
-	resource_size_t) which can vary based on build options, regardless of
-	the width of the CPU data path. Passed by reference.
+For printing a ``phys_addr_t`` type (and its derivatives, such as
+``resource_size_t``) which can vary based on build options, regardless of
+the width of the CPU data path. Passed by reference.
 
-DMA addresses types dma_addr_t:
+DMA addresses types ``dma_addr_t``
+==================================
+
+::
 
 	%pad	0x01234567 or 0x0123456789abcdef
 
-	For printing a dma_addr_t type which can vary based on build options,
-	regardless of the width of the CPU data path. Passed by reference.
+For printing a ``dma_addr_t`` type which can vary based on build options,
+regardless of the width of the CPU data path. Passed by reference.
+
+Raw buffer as an escaped string
+===============================
 
-Raw buffer as an escaped string:
+::
 
 	%*pE[achnops]
 
-	For printing raw buffer as an escaped string. For the following buffer
+For printing raw buffer as an escaped string. For the following buffer::
 
 		1b 62 20 5c 43 07 22 90 0d 5d
 
-	few examples show how the conversion would be done (the result string
-	without surrounding quotes):
+few examples show how the conversion would be done (the result string
+without surrounding quotes)::
 
 		%*pE		"\eb \C\a"\220\r]"
 		%*pEhp		"\x1bb \C\x07"\x90\x0d]"
 		%*pEa		"\e\142\040\\\103\a\042\220\r\135"
 
-	The conversion rules are applied according to an optional combination
-	of flags (see string_escape_mem() kernel documentation for the
-	details):
-		a - ESCAPE_ANY
-		c - ESCAPE_SPECIAL
-		h - ESCAPE_HEX
-		n - ESCAPE_NULL
-		o - ESCAPE_OCTAL
-		p - ESCAPE_NP
-		s - ESCAPE_SPACE
-	By default ESCAPE_ANY_NP is used.
+The conversion rules are applied according to an optional combination
+of flags (see :c:func:`string_escape_mem` kernel documentation for the
+details):
+
+	- ``a`` - ESCAPE_ANY
+	- ``c`` - ESCAPE_SPECIAL
+	- ``h`` - ESCAPE_HEX
+	- ``n`` - ESCAPE_NULL
+	- ``o`` - ESCAPE_OCTAL
+	- ``p`` - ESCAPE_NP
+	- ``s`` - ESCAPE_SPACE
+
+By default ESCAPE_ANY_NP is used.
+
+ESCAPE_ANY_NP is the sane choice for many cases, in particularly for
+printing SSIDs.
 
-	ESCAPE_ANY_NP is the sane choice for many cases, in particularly for
-	printing SSIDs.
+If field width is omitted the 1 byte only will be escaped.
 
-	If field width is omitted the 1 byte only will be escaped.
+Raw buffer as a hex string
+==========================
 
-Raw buffer as a hex string:
+::
 
 	%*ph	00 01 02  ...  3f
 	%*phC	00:01:02: ... :3f
 	%*phD	00-01-02- ... -3f
 	%*phN	000102 ... 3f
 
-	For printing a small buffers (up to 64 bytes long) as a hex string with
-	certain separator. For the larger buffers consider to use
-	print_hex_dump().
+For printing a small buffers (up to 64 bytes long) as a hex string with
+certain separator. For the larger buffers consider to use
+:c:func:`print_hex_dump`.
 
-MAC/FDDI addresses:
+MAC/FDDI addresses
+==================
+
+::
 
 	%pM	00:01:02:03:04:05
 	%pMR	05:04:03:02:01:00
@@ -141,53 +181,62 @@ MAC/FDDI addresses:
 	%pm	000102030405
 	%pmR	050403020100
 
-	For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
-	specifiers result in a printed address with ('M') or without ('m') byte
-	separators. The default byte separator is the colon (':').
+For printing 6-byte MAC/FDDI addresses in hex notation. The ``M`` and ``m``
+specifiers result in a printed address with (``M``) or without (``m``) byte
+separators. The default byte separator is the colon (``:``).
+
+Where FDDI addresses are concerned the ``F`` specifier can be used after
+the ``M`` specifier to use dash (``-``) separators instead of the default
+separator.
 
-	Where FDDI addresses are concerned the 'F' specifier can be used after
-	the 'M' specifier to use dash ('-') separators instead of the default
-	separator.
+For Bluetooth addresses the ``R`` specifier shall be used after the ``M``
+specifier to use reversed byte order suitable for visual interpretation
+of Bluetooth addresses which are in the little endian order.
 
-	For Bluetooth addresses the 'R' specifier shall be used after the 'M'
-	specifier to use reversed byte order suitable for visual interpretation
-	of Bluetooth addresses which are in the little endian order.
+Passed by reference.
 
-	Passed by reference.
+IPv4 addresses
+==============
 
-IPv4 addresses:
+::
 
 	%pI4	1.2.3.4
 	%pi4	001.002.003.004
 	%p[Ii]4[hnbl]
 
-	For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
-	specifiers result in a printed address with ('i4') or without ('I4')
-	leading zeros.
+For printing IPv4 dot-separated decimal addresses. The ``I4`` and ``i4``
+specifiers result in a printed address with (``i4``) or without (``I4``)
+leading zeros.
 
-	The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
-	host, network, big or little endian order addresses respectively. Where
-	no specifier is provided the default network/big endian order is used.
+The additional ``h``, ``n``, ``b``, and ``l`` specifiers are used to specify
+host, network, big or little endian order addresses respectively. Where
+no specifier is provided the default network/big endian order is used.
 
-	Passed by reference.
+Passed by reference.
 
-IPv6 addresses:
+IPv6 addresses
+==============
+
+::
 
 	%pI6	0001:0002:0003:0004:0005:0006:0007:0008
 	%pi6	00010002000300040005000600070008
 	%pI6c	1:2:3:4:5:6:7:8
 
-	For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6'
-	specifiers result in a printed address with ('I6') or without ('i6')
-	colon-separators. Leading zeros are always used.
+For printing IPv6 network-order 16-bit hex addresses. The ``I6`` and ``i6``
+specifiers result in a printed address with (``I6``) or without (``i6``)
+colon-separators. Leading zeros are always used.
+
+The additional ``c`` specifier can be used with the ``I`` specifier to
+print a compressed IPv6 address as described by
+http://tools.ietf.org/html/rfc5952
 
-	The additional 'c' specifier can be used with the 'I' specifier to
-	print a compressed IPv6 address as described by
-	http://tools.ietf.org/html/rfc5952
+Passed by reference.
 
-	Passed by reference.
+IPv4/IPv6 addresses (generic, with port, flowinfo, scope)
+=========================================================
 
-IPv4/IPv6 addresses (generic, with port, flowinfo, scope):
+::
 
 	%pIS	1.2.3.4		or 0001:0002:0003:0004:0005:0006:0007:0008
 	%piS	001.002.003.004	or 00010002000300040005000600070008
@@ -195,141 +244,161 @@ IPv4/IPv6 addresses (generic, with port, flowinfo, scope):
 	%pISpc	1.2.3.4:12345	or [1:2:3:4:5:6:7:8]:12345
 	%p[Ii]S[pfschnbl]
 
-	For printing an IP address without the need to distinguish whether it's
-	of type AF_INET or AF_INET6, a pointer to a valid 'struct sockaddr',
-	specified through 'IS' or 'iS', can be passed to this format specifier.
+For printing an IP address without the need to distinguish whether it``s
+of type AF_INET or AF_INET6, a pointer to a valid ``struct sockaddr``,
+specified through ``IS`` or ``iS``, can be passed to this format specifier.
 
-	The additional 'p', 'f', and 's' specifiers are used to specify port
-	(IPv4, IPv6), flowinfo (IPv6) and scope (IPv6). Ports have a ':' prefix,
-	flowinfo a '/' and scope a '%', each followed by the actual value.
+The additional ``p``, ``f``, and ``s`` specifiers are used to specify port
+(IPv4, IPv6), flowinfo (IPv6) and scope (IPv6). Ports have a ``:`` prefix,
+flowinfo a ``/`` and scope a ``%``, each followed by the actual value.
 
-	In case of an IPv6 address the compressed IPv6 address as described by
-	http://tools.ietf.org/html/rfc5952 is being used if the additional
-	specifier 'c' is given. The IPv6 address is surrounded by '[', ']' in
-	case of additional specifiers 'p', 'f' or 's' as suggested by
-	https://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-07
+In case of an IPv6 address the compressed IPv6 address as described by
+http://tools.ietf.org/html/rfc5952 is being used if the additional
+specifier ``c`` is given. The IPv6 address is surrounded by ``[``, ``]`` in
+case of additional specifiers ``p``, ``f`` or ``s`` as suggested by
+https://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-07
 
-	In case of IPv4 addresses, the additional 'h', 'n', 'b', and 'l'
-	specifiers can be used as well and are ignored in case of an IPv6
-	address.
+In case of IPv4 addresses, the additional ``h``, ``n``, ``b``, and ``l``
+specifiers can be used as well and are ignored in case of an IPv6
+address.
 
-	Passed by reference.
+Passed by reference.
 
-	Further examples:
+Further examples::
 
 	%pISfc		1.2.3.4		or [1:2:3:4:5:6:7:8]/123456789
 	%pISsc		1.2.3.4		or [1:2:3:4:5:6:7:8]%1234567890
 	%pISpfc		1.2.3.4:12345	or [1:2:3:4:5:6:7:8]:12345/123456789
 
-UUID/GUID addresses:
+UUID/GUID addresses
+===================
+
+::
 
 	%pUb	00010203-0405-0607-0809-0a0b0c0d0e0f
 	%pUB	00010203-0405-0607-0809-0A0B0C0D0E0F
 	%pUl	03020100-0504-0706-0809-0a0b0c0e0e0f
 	%pUL	03020100-0504-0706-0809-0A0B0C0E0E0F
 
-	For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
-	'b' and 'B' specifiers are used to specify a little endian order in
-	lower ('l') or upper case ('L') hex characters - and big endian order
-	in lower ('b') or upper case ('B') hex characters.
+For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
+'b' and 'B' specifiers are used to specify a little endian order in
+lower ('l') or upper case ('L') hex characters - and big endian order
+in lower ('b') or upper case ('B') hex characters.
+
+Where no additional specifiers are used the default big endian
+order with lower case hex characters will be printed.
 
-	Where no additional specifiers are used the default big endian
-	order with lower case hex characters will be printed.
+Passed by reference.
 
-	Passed by reference.
+dentry names
+============
 
-dentry names:
+::
 
 	%pd{,2,3,4}
 	%pD{,2,3,4}
 
-	For printing dentry name; if we race with d_move(), the name might be
-	a mix of old and new ones, but it won't oops.  %pd dentry is a safer
-	equivalent of %s dentry->d_name.name we used to use, %pd<n> prints
-	n last components.  %pD does the same thing for struct file.
+For printing dentry name; if we race with :c:func:`d_move`, the name might be
+a mix of old and new ones, but it won't oops.  ``%pd`` dentry is a safer
+equivalent of ``%s`` ``dentry->d_name.name`` we used to use, ``%pd<n>`` prints
+``n`` last components.  ``%pD`` does the same thing for struct file.
+
+Passed by reference.
 
-	Passed by reference.
+block_device names
+==================
 
-block_device names:
+::
 
 	%pg	sda, sda1 or loop0p1
 
-	For printing name of block_device pointers.
+For printing name of block_device pointers.
 
-struct va_format:
+struct va_format
+================
+
+::
 
 	%pV
 
-	For printing struct va_format structures. These contain a format string
-	and va_list as follows:
+For printing struct va_format structures. These contain a format string
+and va_list as follows::
 
 	struct va_format {
 		const char *fmt;
 		va_list *va;
 	};
 
-	Implements a "recursive vsnprintf".
+Implements a "recursive vsnprintf".
+
+Do not use this feature without some mechanism to verify the
+correctness of the format string and va_list arguments.
 
-	Do not use this feature without some mechanism to verify the
-	correctness of the format string and va_list arguments.
+Passed by reference.
 
-	Passed by reference.
+struct clk
+==========
 
-struct clk:
+::
 
 	%pC	pll1
 	%pCn	pll1
 	%pCr	1560000000
 
-	For printing struct clk structures. '%pC' and '%pCn' print the name
-	(Common Clock Framework) or address (legacy clock framework) of the
-	structure; '%pCr' prints the current clock rate.
+For printing struct clk structures. ``%pC`` and ``%pCn`` print the name
+(Common Clock Framework) or address (legacy clock framework) of the
+structure; ``%pCr`` prints the current clock rate.
 
-	Passed by reference.
+Passed by reference.
 
-bitmap and its derivatives such as cpumask and nodemask:
+bitmap and its derivatives such as cpumask and nodemask
+=======================================================
+
+::
 
 	%*pb	0779
 	%*pbl	0,3-6,8-10
 
-	For printing bitmap and its derivatives such as cpumask and nodemask,
-	%*pb output the bitmap with field width as the number of bits and %*pbl
-	output the bitmap as range list with field width as the number of bits.
+For printing bitmap and its derivatives such as cpumask and nodemask,
+``%*pb`` output the bitmap with field width as the number of bits and ``%*pbl``
+output the bitmap as range list with field width as the number of bits.
+
+Passed by reference.
 
-	Passed by reference.
+Flags bitfields such as page flags, gfp_flags
+=============================================
 
-Flags bitfields such as page flags, gfp_flags:
+::
 
 	%pGp	referenced|uptodate|lru|active|private
 	%pGg	GFP_USER|GFP_DMA32|GFP_NOWARN
 	%pGv	read|exec|mayread|maywrite|mayexec|denywrite
 
-	For printing flags bitfields as a collection of symbolic constants that
-	would construct the value. The type of flags is given by the third
-	character. Currently supported are [p]age flags, [v]ma_flags (both
-	expect unsigned long *) and [g]fp_flags (expects gfp_t *). The flag
-	names and print order depends on the particular	type.
+For printing flags bitfields as a collection of symbolic constants that
+would construct the value. The type of flags is given by the third
+character. Currently supported are [p]age flags, [v]ma_flags (both
+expect ``unsigned long *``) and [g]fp_flags (expects ``gfp_t *``). The flag
+names and print order depends on the particular	type.
 
-	Note that this format should not be used directly in TP_printk() part
-	of a tracepoint. Instead, use the show_*_flags() functions from
-	<trace/events/mmflags.h>.
+Note that this format should not be used directly in :c:func:`TP_printk()` part
+of a tracepoint. Instead, use the ``show_*_flags()`` functions from
+<trace/events/mmflags.h>.
 
-	Passed by reference.
+Passed by reference.
 
-Network device features:
+Network device features
+=======================
+
+::
 
 	%pNF	0x000000000000c000
 
-	For printing netdev_features_t.
+For printing netdev_features_t.
 
-	Passed by reference.
+Passed by reference.
 
-If you add other %p extensions, please extend lib/test_printf.c with
+If you add other ``%p`` extensions, please extend lib/test_printf.c with
 one or more test cases, if at all feasible.
 
 
 Thank you for your cooperation and attention.
-
-
-By Randy Dunlap <rdunlap@xxxxxxxxxxxxx> and
-Andrew Murray <amurray@xxxxxxxxxxxxxx>