Re: [RFT 2/2] pinctrl: samsung: Fix invalid register offset used for Exynos5433 external interrupts

[Sylwester Nawrocki]

On 06/14/2017 03:18 PM, Krzysztof Kozlowski wrote:
> When setting the pin function for external interrupts, the driver used
> wrong IO memory address base.  The pin function register is always under
> pctl_base, not the eint_base.
> 
> By updating wrong register, the external interrupts for chosen GPIO
> would not work at all and some other GPIO might be configured to wrong
> value.
> 
> Platforms other than Exynos5433 should not be affected as eint_base
> equals pctl_base in such case.
> 
> Fixes: 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple 
> IORESOURCE_MEM for one pin-bank")
> Cc:<stable@xxxxxxxxxxxxxxx>
> Reported-by: Tomasz Figa<tomasz.figa@xxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski<krzk@xxxxxxxxxx>

I've tested this patch by comparing GPFx_CON register values, as 
nothing seems to be currently using pins from the GPF1...GPF5 banks 
as external interrupts on TM2, the only board based on Exynos5433.
I changed sii8620 interrupt-parent temporarily to &gpf1 and GPF1_CON
got configured properly with the patch and improperly without 
the patch. I guess this can be considered as

Tested-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>

-- 
Thanks,
Sylwester