Re: [RFC v2 01/12] powerpc: Free up four 64K PTE bits in 4K backed hpte pages.
From: Aneesh Kumar K.V
Date: Wed Jun 21 2017 - 02:42:11 EST
Ram Pai <linuxram@xxxxxxxxxx> writes:
> Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6
> in the 4K backed hpte pages. These bits continue to be used
> for 64K backed hpte pages in this patch, but will be freed
> up in the next patch.
>
> The patch does the following change to the 64K PTE format
>
> H_PAGE_BUSY moves from bit 3 to bit 9
> H_PAGE_F_SECOND which occupied bit 4 moves to the second part
> of the pte.
> H_PAGE_F_GIX which occupied bit 5, 6 and 7 also moves to the
> second part of the pte.
>
> the four bits((H_PAGE_F_SECOND|H_PAGE_F_GIX) that represent a slot
> is initialized to 0xF indicating an invalid slot. If a hpte
> gets cached in a 0xF slot(i.e 7th slot of secondary), it is
> released immediately. In other words, even though 0xF is a
> valid slot we discard and consider it as an invalid
> slot;i.e hpte_soft_invalid(). This gives us an opportunity to not
> depend on a bit in the primary PTE in order to determine the
> validity of a slot.
>
> When we release a hpte in the 0xF slot we also release a
> legitimate primary slot and unmap that entry. This is to
> ensure that we do get a legimate non-0xF slot the next time we
> retry for a slot.
>
> Though treating 0xF slot as invalid reduces the number of available
> slots and may have an effect on the performance, the probabilty
> of hitting a 0xF is extermely low.
>
> Compared to the current scheme, the above described scheme reduces
> the number of false hash table updates significantly and has the
> added advantage of releasing four valuable PTE bits for other
> purpose.
>
> This idea was jointly developed by Paul Mackerras, Aneesh, Michael
> Ellermen and myself.
>
> 4K PTE format remain unchanged currently.
>
> Signed-off-by: Ram Pai <linuxram@xxxxxxxxxx>
> ---
> arch/powerpc/include/asm/book3s/64/hash-4k.h | 20 +++++++
> arch/powerpc/include/asm/book3s/64/hash-64k.h | 32 +++++++----
> arch/powerpc/include/asm/book3s/64/hash.h | 15 +++--
> arch/powerpc/include/asm/book3s/64/mmu-hash.h | 5 ++
> arch/powerpc/mm/dump_linuxpagetables.c | 3 +-
> arch/powerpc/mm/hash64_4k.c | 14 ++---
> arch/powerpc/mm/hash64_64k.c | 81 ++++++++++++---------------
> arch/powerpc/mm/hash_utils_64.c | 30 +++++++---
> 8 files changed, 122 insertions(+), 78 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
> index b4b5e6b..5ef1d81 100644
> --- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
> +++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
> @@ -16,6 +16,18 @@
> #define H_PUD_TABLE_SIZE (sizeof(pud_t) << H_PUD_INDEX_SIZE)
> #define H_PGD_TABLE_SIZE (sizeof(pgd_t) << H_PGD_INDEX_SIZE)
>
> +
> +/*
> + * Only supported by 4k linux page size
> + */
> +#define H_PAGE_F_SECOND _RPAGE_RSV2 /* HPTE is in 2ndary HPTEG */
> +#define H_PAGE_F_GIX (_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
> +#define H_PAGE_F_GIX_SHIFT 56
> +
> +#define H_PAGE_BUSY _RPAGE_RSV1 /* software: PTE & hash are busy */
> +#define H_PAGE_HASHPTE _RPAGE_RPN43 /* PTE has associated HPTE */
> +
> +
> /* PTE flags to conserve for HPTE identification */
> #define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | \
> H_PAGE_F_SECOND | H_PAGE_F_GIX)
> @@ -48,6 +60,14 @@ static inline int hash__hugepd_ok(hugepd_t hpd)
> }
> #endif
>
> +static inline unsigned long set_hidx_slot(pte_t *ptep, real_pte_t rpte,
> + unsigned int subpg_index, unsigned long slot)
> +{
> + return (slot << H_PAGE_F_GIX_SHIFT) &
> + (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> +}
> +
> +
> #ifdef CONFIG_TRANSPARENT_HUGEPAGE
>
> static inline char *get_hpte_slot_array(pmd_t *pmdp)
> diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
> index 9732837..0eb3c89 100644
> --- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
> +++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
> @@ -10,23 +10,25 @@
> * 64k aligned address free up few of the lower bits of RPN for us
> * We steal that here. For more deatils look at pte_pfn/pfn_pte()
> */
> -#define H_PAGE_COMBO _RPAGE_RPN0 /* this is a combo 4k page */
> -#define H_PAGE_4K_PFN _RPAGE_RPN1 /* PFN is for a single 4k page */
> +#define H_PAGE_COMBO _RPAGE_RPN0 /* this is a combo 4k page */
> +#define H_PAGE_4K_PFN _RPAGE_RPN1 /* PFN is for a single 4k page */
> +#define H_PAGE_F_SECOND _RPAGE_RSV2 /* HPTE is in 2ndary HPTEG */
> +#define H_PAGE_F_GIX (_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
> +#define H_PAGE_F_GIX_SHIFT 56
> +
> +
> +#define H_PAGE_BUSY _RPAGE_RPN42 /* software: PTE & hash are busy */
> +#define H_PAGE_HASHPTE _RPAGE_RPN43 /* PTE has associated HPTE */
> +
> /*
> * We need to differentiate between explicit huge page and THP huge
> * page, since THP huge page also need to track real subpage details
> */
> #define H_PAGE_THP_HUGE H_PAGE_4K_PFN
>
> -/*
> - * Used to track subpage group valid if H_PAGE_COMBO is set
> - * This overloads H_PAGE_F_GIX and H_PAGE_F_SECOND
> - */
> -#define H_PAGE_COMBO_VALID (H_PAGE_F_GIX | H_PAGE_F_SECOND)
> -
> /* PTE flags to conserve for HPTE identification */
> -#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_F_SECOND | \
> - H_PAGE_F_GIX | H_PAGE_HASHPTE | H_PAGE_COMBO)
> +#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | H_PAGE_COMBO)
Why in this patch ? This is related to 64K pte
> +
> /*
> * we support 16 fragments per PTE page of 64K size.
> */
> @@ -74,6 +76,16 @@ static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
> return (pte_val(rpte.pte) >> H_PAGE_F_GIX_SHIFT) & 0xf;
> }
>
> +static inline unsigned long set_hidx_slot(pte_t *ptep, real_pte_t rpte,
> + unsigned int subpg_index, unsigned long slot)
> +{
> + unsigned long *hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
> +
> + rpte.hidx &= ~(0xfUL << (subpg_index << 2));
> + *hidxp = rpte.hidx | (slot << (subpg_index << 2));
> + return 0x0UL;
> +}
> +
> #define __rpte_to_pte(r) ((r).pte)
> extern bool __rpte_sub_valid(real_pte_t rpte, unsigned long index);
> /*
> diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
> index 4e957b0..e7cf03a 100644
> --- a/arch/powerpc/include/asm/book3s/64/hash.h
> +++ b/arch/powerpc/include/asm/book3s/64/hash.h
> @@ -8,11 +8,8 @@
> *
> */
> #define H_PTE_NONE_MASK _PAGE_HPTEFLAGS
> -#define H_PAGE_F_GIX_SHIFT 56
> -#define H_PAGE_BUSY _RPAGE_RSV1 /* software: PTE & hash are busy */
> -#define H_PAGE_F_SECOND _RPAGE_RSV2 /* HPTE is in 2ndary HPTEG */
> -#define H_PAGE_F_GIX (_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
> -#define H_PAGE_HASHPTE _RPAGE_RPN43 /* PTE has associated HPTE */
> +
> +#define INIT_HIDX (~0x0UL)
>
> #ifdef CONFIG_PPC_64K_PAGES
> #include <asm/book3s/64/hash-64k.h>
> @@ -160,6 +157,14 @@ static inline int hash__pte_none(pte_t pte)
> return (pte_val(pte) & ~H_PTE_NONE_MASK) == 0;
> }
>
> +static inline bool hpte_soft_invalid(unsigned long slot)
> +{
> + return ((slot & 0xfUL) == 0xfUL);
> +}
> +
> +unsigned long get_hidx_gslot(unsigned long vpn, unsigned long shift,
> + int ssize, real_pte_t rpte, unsigned int subpg_index);
> +
> /* This low level function performs the actual PTE insertion
> * Setting the PTE depends on the MMU type and other factors. It's
> * an horrible mess that I'm not going to try to clean up now but
> diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
> index 6981a52..cfb8169 100644
> --- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
> +++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
> @@ -435,6 +435,11 @@ extern int __hash_page_4K(unsigned long ea, unsigned long access,
> extern int __hash_page_64K(unsigned long ea, unsigned long access,
> unsigned long vsid, pte_t *ptep, unsigned long trap,
> unsigned long flags, int ssize);
> +extern unsigned long set_hidx_slot(pte_t *ptep, real_pte_t rpte,
> + unsigned int subpg_index, unsigned long slot);
> +extern unsigned long get_hidx_slot(unsigned long vpn, unsigned long shift,
> + int ssize, real_pte_t rpte, unsigned int subpg_index);
> +
> struct mm_struct;
> unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap);
> extern int hash_page_mm(struct mm_struct *mm, unsigned long ea,
> diff --git a/arch/powerpc/mm/dump_linuxpagetables.c b/arch/powerpc/mm/dump_linuxpagetables.c
> index 44fe483..b832ed3 100644
> --- a/arch/powerpc/mm/dump_linuxpagetables.c
> +++ b/arch/powerpc/mm/dump_linuxpagetables.c
> @@ -213,7 +213,7 @@ struct flag_info {
> .val = H_PAGE_4K_PFN,
> .set = "4K_pfn",
> }, {
> -#endif
> +#else
> .mask = H_PAGE_F_GIX,
> .val = H_PAGE_F_GIX,
> .set = "f_gix",
> @@ -224,6 +224,7 @@ struct flag_info {
> .val = H_PAGE_F_SECOND,
> .set = "f_second",
> }, {
> +#endif /* CONFIG_PPC_64K_PAGES */
> #endif
> .mask = _PAGE_SPECIAL,
> .val = _PAGE_SPECIAL,
> diff --git a/arch/powerpc/mm/hash64_4k.c b/arch/powerpc/mm/hash64_4k.c
> index 6fa450c..c673829 100644
> --- a/arch/powerpc/mm/hash64_4k.c
> +++ b/arch/powerpc/mm/hash64_4k.c
> @@ -20,6 +20,7 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> pte_t *ptep, unsigned long trap, unsigned long flags,
> int ssize, int subpg_prot)
> {
> + real_pte_t rpte;
> unsigned long hpte_group;
> unsigned long rflags, pa;
> unsigned long old_pte, new_pte;
> @@ -54,6 +55,7 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> * need to add in 0x1 if it's a read-only user page
> */
> rflags = htab_convert_pte_flags(new_pte);
> + rpte = __real_pte(__pte(old_pte), ptep);
>
> if (cpu_has_feature(CPU_FTR_NOEXECUTE) &&
> !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
> @@ -64,13 +66,10 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> /*
> * There MIGHT be an HPTE for this pte
> */
> - hash = hpt_hash(vpn, shift, ssize);
> - if (old_pte & H_PAGE_F_SECOND)
> - hash = ~hash;
> - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
> - slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
> + unsigned long gslot = get_hidx_gslot(vpn, shift,
> + ssize, rpte, 0);
>
> - if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_4K,
> + if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, MMU_PAGE_4K,
> MMU_PAGE_4K, ssize, flags) == -1)
> old_pte &= ~_PAGE_HPTEFLAGS;
> }
> @@ -118,8 +117,7 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> return -1;
> }
> new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
> - new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
> - (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> + new_pte |= set_hidx_slot(ptep, rpte, 0, slot);
> }
> *ptep = __pte(new_pte & ~H_PAGE_BUSY);
> return 0;
None of the above changes are needed. We are not changing anything w.r.t
4k linux page table yet. So we can drop this.
> diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
> index 1a68cb1..3702a3c 100644
> --- a/arch/powerpc/mm/hash64_64k.c
> +++ b/arch/powerpc/mm/hash64_64k.c
> @@ -15,34 +15,13 @@
> #include <linux/mm.h>
> #include <asm/machdep.h>
> #include <asm/mmu.h>
> +
> /*
> * index from 0 - 15
> */
> bool __rpte_sub_valid(real_pte_t rpte, unsigned long index)
> {
> - unsigned long g_idx;
> - unsigned long ptev = pte_val(rpte.pte);
> -
> - g_idx = (ptev & H_PAGE_COMBO_VALID) >> H_PAGE_F_GIX_SHIFT;
> - index = index >> 2;
> - if (g_idx & (0x1 << index))
> - return true;
> - else
> - return false;
> -}
> -/*
> - * index from 0 - 15
> - */
> -static unsigned long mark_subptegroup_valid(unsigned long ptev, unsigned long index)
> -{
> - unsigned long g_idx;
> -
> - if (!(ptev & H_PAGE_COMBO))
> - return ptev;
> - index = index >> 2;
> - g_idx = 0x1 << index;
> -
> - return ptev | (g_idx << H_PAGE_F_GIX_SHIFT);
> + return !(hpte_soft_invalid(rpte.hidx >> (index << 2)));
> }
>
> int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> @@ -50,10 +29,9 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> int ssize, int subpg_prot)
> {
> real_pte_t rpte;
> - unsigned long *hidxp;
> unsigned long hpte_group;
> unsigned int subpg_index;
> - unsigned long rflags, pa, hidx;
> + unsigned long rflags, pa;
> unsigned long old_pte, new_pte, subpg_pte;
> unsigned long vpn, hash, slot;
> unsigned long shift = mmu_psize_defs[MMU_PAGE_4K].shift;
> @@ -116,28 +94,23 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> * On hash insert failure we use old pte value and we don't
> * want slot information there if we have a insert failure.
> */
> - old_pte &= ~(H_PAGE_HASHPTE | H_PAGE_F_GIX | H_PAGE_F_SECOND);
> - new_pte &= ~(H_PAGE_HASHPTE | H_PAGE_F_GIX | H_PAGE_F_SECOND);
> + old_pte &= ~(H_PAGE_HASHPTE);
> + new_pte &= ~(H_PAGE_HASHPTE);
> goto htab_insert_hpte;
> }
> /*
> * Check for sub page valid and update
> */
> if (__rpte_sub_valid(rpte, subpg_index)) {
> - int ret;
>
> - hash = hpt_hash(vpn, shift, ssize);
> - hidx = __rpte_to_hidx(rpte, subpg_index);
> - if (hidx & _PTEIDX_SECONDARY)
> - hash = ~hash;
> - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
> - slot += hidx & _PTEIDX_GROUP_IX;
> + unsigned long gslot = get_hidx_gslot(vpn, shift,
> + ssize, rpte, subpg_index);
Converting that to helper is also not needed in this patch. Leave it as
it is. It is much easier to review.
>
> - ret = mmu_hash_ops.hpte_updatepp(slot, rflags, vpn,
> + int ret = mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn,
> MMU_PAGE_4K, MMU_PAGE_4K,
> ssize, flags);
> /*
> - *if we failed because typically the HPTE wasn't really here
> + * if we failed because typically the HPTE wasn't really here
> * we try an insertion.
> */
> if (ret == -1)
> @@ -148,6 +121,15 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> }
>
> htab_insert_hpte:
> +
> + /*
> + * initialize all hidx entries to a invalid value,
> + * the first time the PTE is about to allocate
> + * a 4K hpte
> + */
> + if (!(old_pte & H_PAGE_COMBO))
> + rpte.hidx = INIT_HIDX;
> +
> /*
> * handle H_PAGE_4K_PFN case
> */
> @@ -177,10 +159,20 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> rflags, HPTE_V_SECONDARY,
> MMU_PAGE_4K, MMU_PAGE_4K,
> ssize);
> - if (slot == -1) {
> - if (mftb() & 0x1)
> +
> + if (unlikely(hpte_soft_invalid(slot))) {
Should we name that hpte_slot_invalid() ? ie. s/soft/slot/ ?
> + slot = slot & _PTEIDX_GROUP_IX;
> + mmu_hash_ops.hpte_invalidate(hpte_group+slot, vpn,
> + MMU_PAGE_4K, MMU_PAGE_4K,
> + ssize, flags);
What is the last arg flags here ? I guess we need to pass 0 there ?
We can't do a local = 1 invalidate, because we don't know whether
anybody did really access this address in between and has got the entry
in TLB.
> + }
> +
> + if (unlikely(slot == -1 || hpte_soft_invalid(slot))) {
> +
Can you add a comment around explaining invalid slot always result in
removing from primary ? Also do we want to store that invalid slot
details in a variable ? instead of doing that conditional again and
again ? This is hotpath.
> + if (hpte_soft_invalid(slot) || (mftb() & 0x1))
> hpte_group = ((hash & htab_hash_mask) *
> HPTES_PER_GROUP) & ~0x7UL;
> +
> mmu_hash_ops.hpte_remove(hpte_group);
> /*
> * FIXME!! Should be try the group from which we removed ?
> @@ -204,11 +196,9 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
> * Since we have H_PAGE_BUSY set on ptep, we can be sure
> * nobody is undating hidx.
> */
> - hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
> - rpte.hidx &= ~(0xfUL << (subpg_index << 2));
> - *hidxp = rpte.hidx | (slot << (subpg_index << 2));
> - new_pte = mark_subptegroup_valid(new_pte, subpg_index);
> - new_pte |= H_PAGE_HASHPTE;
> + new_pte |= set_hidx_slot(ptep, rpte, subpg_index, slot);
> + new_pte |= H_PAGE_HASHPTE;
> +
> /*
> * check __real_pte for details on matching smp_rmb()
> */
> @@ -322,9 +312,10 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
> MMU_PAGE_64K, MMU_PAGE_64K, old_pte);
> return -1;
> }
> - new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
> +
> new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
> - (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> + (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> + new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
What is this change ? i guess we want this in second patch ?
> }
> *ptep = __pte(new_pte & ~H_PAGE_BUSY);
> return 0;
> diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
> index f2095ce..c0f4b46 100644
> --- a/arch/powerpc/mm/hash_utils_64.c
> +++ b/arch/powerpc/mm/hash_utils_64.c
> @@ -975,8 +975,9 @@ void __init hash__early_init_devtree(void)
>
> void __init hash__early_init_mmu(void)
> {
> +#ifndef CONFIG_PPC_64K_PAGES
> /*
> - * We have code in __hash_page_64K() and elsewhere, which assumes it can
> + * We have code in __hash_page_4K() and elsewhere, which assumes it can
> * do the following:
> * new_pte |= (slot << H_PAGE_F_GIX_SHIFT) & (H_PAGE_F_SECOND | H_PAGE_F_GIX);
> *
> @@ -987,6 +988,7 @@ void __init hash__early_init_mmu(void)
> * with a BUILD_BUG_ON().
> */
> BUILD_BUG_ON(H_PAGE_F_SECOND != (1ul << (H_PAGE_F_GIX_SHIFT + 3)));
> +#endif /* CONFIG_PPC_64K_PAGES */
>
> htab_init_page_sizes();
>
> @@ -1589,29 +1591,39 @@ static inline void tm_flush_hash_page(int local)
> }
> #endif
>
> +unsigned long get_hidx_gslot(unsigned long vpn, unsigned long shift,
> + int ssize, real_pte_t rpte, unsigned int subpg_index)
> +{
> + unsigned long hash, slot, hidx;
> +
> + hash = hpt_hash(vpn, shift, ssize);
> + hidx = __rpte_to_hidx(rpte, subpg_index);
> + if (hidx & _PTEIDX_SECONDARY)
> + hash = ~hash;
> + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
> + slot += hidx & _PTEIDX_GROUP_IX;
> + return slot;
> +}
We don't need this helper for this patch series ?
> +
> +
> /* WARNING: This is called from hash_low_64.S, if you change this prototype,
> * do not forget to update the assembly call site !
> */
> void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize, int ssize,
> unsigned long flags)
> {
> - unsigned long hash, index, shift, hidx, slot;
> + unsigned long hash, index, shift, hidx, gslot;
> int local = flags & HPTE_LOCAL_UPDATE;
>
> DBG_LOW("flush_hash_page(vpn=%016lx)\n", vpn);
> pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) {
> - hash = hpt_hash(vpn, shift, ssize);
> - hidx = __rpte_to_hidx(pte, index);
> - if (hidx & _PTEIDX_SECONDARY)
> - hash = ~hash;
> - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
> - slot += hidx & _PTEIDX_GROUP_IX;
> + gslot = get_hidx_gslot(vpn, shift, ssize, pte, index);
> DBG_LOW(" sub %ld: hash=%lx, hidx=%lx\n", index, slot, hidx);
> /*
> * We use same base page size and actual psize, because we don't
> * use these functions for hugepage
> */
> - mmu_hash_ops.hpte_invalidate(slot, vpn, psize, psize,
> + mmu_hash_ops.hpte_invalidate(gslot, vpn, psize, psize,
> ssize, local);
> } pte_iterate_hashed_end();
>
And if we avoid adding that helper, changes like this can be avoided in
the patch.
-aneesh