[PATCH v2 5/5] PM / core: Drop run_wake flag from struct dev_pm_info

[Rafael J. Wysocki]

From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

The run_wake flag in struct dev_pm_info is used to indicate whether
or not the device is capable of generating remote wakeup signals at
run time (or in the system working state), but the distinction
between runtime remote wakeup and system wakeup signaling has always
been rather artificial.  The only practical reason for it to exist
at the core level was that ACPI and PCI treated those two cases
differently, but that's not the case any more after recent changes.

For this reason, get rid of the run_wake flag and, when applicable,
use device_set_wakeup_capable() and device_can_wakeup() instead of
device_set_run_wake() and device_run_wake(), respectively.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---

-> v2: No changes, but it was [6/6] previously.

---
 Documentation/power/runtime_pm.txt |    7 ++-----
 drivers/acpi/pci_root.c            |    5 ++---
 drivers/pci/pci-acpi.c             |    5 +----
 drivers/pci/pci.c                  |    6 +++---
 drivers/pci/pcie/pme.c             |    2 +-
 drivers/usb/dwc3/dwc3-pci.c        |    3 +--
 drivers/usb/host/uhci-pci.c        |    2 +-
 include/linux/pm.h                 |    1 -
 include/linux/pm_runtime.h         |   12 ------------
 9 files changed, 11 insertions(+), 32 deletions(-)

Index: linux-pm/include/linux/pm.h
===================================================================
--- linux-pm.orig/include/linux/pm.h
+++ linux-pm/include/linux/pm.h
@@ -584,7 +584,6 @@ struct dev_pm_info {
 	unsigned int		idle_notification:1;
 	unsigned int		request_pending:1;
 	unsigned int		deferred_resume:1;
-	unsigned int		run_wake:1;
 	unsigned int		runtime_auto:1;
 	bool			ignore_children:1;
 	unsigned int		no_callbacks:1;
Index: linux-pm/include/linux/pm_runtime.h
===================================================================
--- linux-pm.orig/include/linux/pm_runtime.h
+++ linux-pm/include/linux/pm_runtime.h
@@ -76,16 +76,6 @@ static inline void pm_runtime_put_noidle
 	atomic_add_unless(&dev->power.usage_count, -1, 0);
 }
 
-static inline bool device_run_wake(struct device *dev)
-{
-	return dev->power.run_wake;
-}
-
-static inline void device_set_run_wake(struct device *dev, bool enable)
-{
-	dev->power.run_wake = enable;
-}
-
 static inline bool pm_runtime_suspended(struct device *dev)
 {
 	return dev->power.runtime_status == RPM_SUSPENDED
@@ -163,8 +153,6 @@ static inline void pm_runtime_forbid(str
 static inline void pm_suspend_ignore_children(struct device *dev, bool enable) {}
 static inline void pm_runtime_get_noresume(struct device *dev) {}
 static inline void pm_runtime_put_noidle(struct device *dev) {}
-static inline bool device_run_wake(struct device *dev) { return false; }
-static inline void device_set_run_wake(struct device *dev, bool enable) {}
 static inline bool pm_runtime_suspended(struct device *dev) { return false; }
 static inline bool pm_runtime_active(struct device *dev) { return true; }
 static inline bool pm_runtime_status_suspended(struct device *dev) { return false; }
Index: linux-pm/drivers/acpi/pci_root.c
===================================================================
--- linux-pm.orig/drivers/acpi/pci_root.c
+++ linux-pm/drivers/acpi/pci_root.c
@@ -608,8 +608,7 @@ static int acpi_pci_root_add(struct acpi
 		pcie_no_aspm();
 
 	pci_acpi_add_bus_pm_notifier(device);
-	if (device->wakeup.flags.valid)
-		device_set_run_wake(root->bus->bridge, true);
+	device_set_wakeup_capable(root->bus->bridge, device->wakeup.flags.valid);
 
 	if (hotadd) {
 		pcibios_resource_survey_bus(root->bus);
@@ -649,7 +648,7 @@ static void acpi_pci_root_remove(struct
 	pci_stop_root_bus(root->bus);
 
 	pci_ioapic_remove(root);
-	device_set_run_wake(root->bus->bridge, false);
+	device_set_wakeup_capable(root->bus->bridge, false);
 	pci_acpi_remove_bus_pm_notifier(device);
 
 	pci_remove_root_bus(root->bus);
Index: linux-pm/drivers/pci/pci-acpi.c
===================================================================
--- linux-pm.orig/drivers/pci/pci-acpi.c
+++ linux-pm/drivers/pci/pci-acpi.c
@@ -738,7 +738,6 @@ static void pci_acpi_setup(struct device
 		return;
 
 	device_set_wakeup_capable(dev, true);
-	device_set_run_wake(dev, true);
 	acpi_pci_wakeup(pci_dev, false);
 }
 
@@ -750,10 +749,8 @@ static void pci_acpi_cleanup(struct devi
 		return;
 
 	pci_acpi_remove_pm_notifier(adev);
-	if (adev->wakeup.flags.valid) {
+	if (adev->wakeup.flags.valid)
 		device_set_wakeup_capable(dev, false);
-		device_set_run_wake(dev, false);
-	}
 }
 
 static bool pci_acpi_bus_match(struct device *dev)
Index: linux-pm/drivers/pci/pcie/pme.c
===================================================================
--- linux-pm.orig/drivers/pci/pcie/pme.c
+++ linux-pm/drivers/pci/pcie/pme.c
@@ -300,7 +300,7 @@ static irqreturn_t pcie_pme_irq(int irq,
  */
 static int pcie_pme_can_wakeup(struct pci_dev *dev, void *ign)
 {
-	device_set_run_wake(&dev->dev, true);
+	device_set_wakeup_capable(&dev->dev, true);
 	return 0;
 }
 
Index: linux-pm/drivers/usb/dwc3/dwc3-pci.c
===================================================================
--- linux-pm.orig/drivers/usb/dwc3/dwc3-pci.c
+++ linux-pm/drivers/usb/dwc3/dwc3-pci.c
@@ -230,7 +230,6 @@ static int dwc3_pci_probe(struct pci_dev
 	}
 
 	device_init_wakeup(dev, true);
-	device_set_run_wake(dev, true);
 	pci_set_drvdata(pci, dwc);
 	pm_runtime_put(dev);
 
@@ -310,7 +309,7 @@ static int dwc3_pci_runtime_suspend(stru
 {
 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
 
-	if (device_run_wake(dev))
+	if (device_can_wakeup(dev))
 		return dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D3);
 
 	return -EBUSY;
Index: linux-pm/drivers/usb/host/uhci-pci.c
===================================================================
--- linux-pm.orig/drivers/usb/host/uhci-pci.c
+++ linux-pm/drivers/usb/host/uhci-pci.c
@@ -131,7 +131,7 @@ static int uhci_pci_init(struct usb_hcd
 
 	/* Intel controllers use non-PME wakeup signalling */
 	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_INTEL)
-		device_set_run_wake(uhci_dev(uhci), 1);
+		device_set_wakeup_capable(uhci_dev(uhci), true);
 
 	/* Set up pointers to PCI-specific functions */
 	uhci->reset_hc = uhci_pci_reset_hc;
Index: linux-pm/drivers/pci/pci.c
===================================================================
--- linux-pm.orig/drivers/pci/pci.c
+++ linux-pm/drivers/pci/pci.c
@@ -2105,7 +2105,7 @@ bool pci_dev_run_wake(struct pci_dev *de
 {
 	struct pci_bus *bus = dev->bus;
 
-	if (device_run_wake(&dev->dev))
+	if (device_can_wakeup(&dev->dev))
 		return true;
 
 	if (!dev->pme_support)
@@ -2118,7 +2118,7 @@ bool pci_dev_run_wake(struct pci_dev *de
 	while (bus->parent) {
 		struct pci_dev *bridge = bus->self;
 
-		if (device_run_wake(&bridge->dev))
+		if (device_can_wakeup(&bridge->dev))
 			return true;
 
 		bus = bus->parent;
@@ -2126,7 +2126,7 @@ bool pci_dev_run_wake(struct pci_dev *de
 
 	/* We have reached the root bus. */
 	if (bus->bridge)
-		return device_run_wake(bus->bridge);
+		return device_can_wakeup(bus->bridge);
 
 	return false;
 }
Index: linux-pm/Documentation/power/runtime_pm.txt
===================================================================
--- linux-pm.orig/Documentation/power/runtime_pm.txt
+++ linux-pm/Documentation/power/runtime_pm.txt
@@ -105,9 +105,9 @@ knows what to do to handle the device).
 
 In particular, if the driver requires remote wakeup capability (i.e. hardware
 mechanism allowing the device to request a change of its power state, such as
-PCI PME) for proper functioning and device_run_wake() returns 'false' for the
+PCI PME) for proper functioning and device_can_wakeup() returns 'false' for the
 device, then ->runtime_suspend() should return -EBUSY.  On the other hand, if
-device_run_wake() returns 'true' for the device and the device is put into a
+device_can_wakeup() returns 'true' for the device and the device is put into a
 low-power state during the execution of the suspend callback, it is expected
 that remote wakeup will be enabled for the device.  Generally, remote wakeup
 should be enabled for all input devices put into low-power states at run time.
@@ -253,9 +253,6 @@ defined in include/linux/pm.h:
       being executed for that device and it is not practical to wait for the
       suspend to complete; means "start a resume as soon as you've suspended"
 
-  unsigned int run_wake;
-    - set if the device is capable of generating runtime wake-up events
-
   enum rpm_status runtime_status;
     - the runtime PM status of the device; this field's initial value is
       RPM_SUSPENDED, which means that each device is initially regarded by the