Re: [PATCH 1/2] arm64: dts: exynos: Fix wrong label for USB 3.0 controller node

[Krzysztof Kozlowski]

On Tue, Jun 20, 2017 at 04:12:23PM +0900, Dongwoo Lee wrote:
> Exynos5433 has two usb 3.0 controllers: usbhost and usbdrd. usbhost
> is host-only controller whereas usbdrd supports both peripheral and
> host mode. "drd" means dual-role device, so usbhost cannot be labeled
> with the name contains "drd". Howerver, the label usbdrd_dwc3_0 was

Patch looks okay but it is too late for current cycle so I will take it
for v4.14. In future, please run spell check :)

Best regards,
Krzysztof

> used for usbhost's dwc3 node. It seems it obviously fault because TM2
> and TM2E doesn't use usbhost but dr_mode property is assigned to it.
> 
> This patch assigns the proper label for two dwc3 nodes, and apply
> changes to the related reference
> 
> Signed-off-by: Dongwoo Lee <dwoo08.lee@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 +-
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi            | 4 ++--
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> index 804a270..477c3bc 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
> @@ -1202,7 +1202,7 @@
>  	status = "okay";
>  };
>  
> -&usbdrd_dwc3_0 {
> +&usbdrd_dwc3 {
>  	dr_mode = "otg";
>  };
>  
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 727f36a..7fe994b 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -1367,7 +1367,7 @@
>  			ranges;
>  			status = "disabled";
>  
> -			dwc3@15400000 {
> +			usbdrd_dwc3: dwc3@15400000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x15400000 0x10000>;
>  				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1414,7 +1414,7 @@
>  			ranges;
>  			status = "disabled";
>  
> -			usbdrd_dwc3_0: dwc3@15a00000 {
> +			usbhost_dwc3: dwc3@15a00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x15a00000 0x10000>;
>  				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 1.9.1
>