Re: [PATCH 2/3] iio: adc: mt7622: add support for suspend/resume.

From: Jonathan Cameron
Date: Mon Jun 26 2017 - 01:05:23 EST




On 26 June 2017 04:54:52 CEST, zhiyong tao <zhiyong.tao@xxxxxxxxxxxx> wrote:
>On Sat, 2017-06-24 at 21:00 +0100, Jonathan Cameron wrote:
>> On Thu, 22 Jun 2017 13:44:33 +0800
>> Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx> wrote:
>>
>> > This patch supports auxadc suspend/resume flow.
>> > Disable auxadc clk and power in suspend function.
>> > Enable axuadc clk and power in resume function.
>> >
>> > Signed-off-by: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
>> Worth handling the cases where power management is not configured
>into the
>> kernel properly.
>>
>> So a few minor suggestions. Otherwise looks good to me.
>> > ---
>> > drivers/iio/adc/mt6577_auxadc.c | 37
>+++++++++++++++++++++++++++++++++++++
>> > 1 file changed, 37 insertions(+)
>> >
>> > diff --git a/drivers/iio/adc/mt6577_auxadc.c
>b/drivers/iio/adc/mt6577_auxadc.c
>> > index 2d104c8..2dd7c74 100644
>> > --- a/drivers/iio/adc/mt6577_auxadc.c
>> > +++ b/drivers/iio/adc/mt6577_auxadc.c
>> > @@ -184,6 +184,37 @@ static int mt6577_auxadc_read_raw(struct
>iio_dev *indio_dev,
>> > .read_raw = &mt6577_auxadc_read_raw,
>> > };
>> >
>> > +static int mt6577_auxadc_resume(struct device *dev)
>> > +{
>> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
>> > + struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
>> > + int ret;
>> > +
>> > + ret = clk_prepare_enable(adc_dev->adc_clk);
>> > + if (ret) {
>> > + pr_err("failed to enable auxadc clock\n");
>> > + return ret;
>> > + }
>> > +
>> > + mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
>> > + MT6577_AUXADC_PDN_EN, 0);
>> > + mdelay(MT6577_AUXADC_POWER_READY_MS);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static int mt6577_auxadc_suspend(struct device *dev)
>> Mark these __maybe_unused for the CONFIG_PM but not CONFIG_PM_SLEEP
>case.
Preferred to mark __maybe_unused and use the macro mentioned below.
>
>==> ok, We will add CONFIG_PM_SLEEP for the suspend/resume case in v2.
>thanks!
>
>> > +{
>> > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
>> > + struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
>> > +
>> > + mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
>> > + 0, MT6577_AUXADC_PDN_EN);
>> > + clk_disable_unprepare(adc_dev->adc_clk);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > static int mt6577_auxadc_probe(struct platform_device *pdev)
>> > {
>> > struct mt6577_auxadc_device *adc_dev;
>> > @@ -269,6 +300,11 @@ static int mt6577_auxadc_remove(struct
>platform_device *pdev)
>> > return 0;
>> > }
>> >
>> > +static const struct dev_pm_ops mt6577_auxadc_pm_ops = {
>> > + .suspend = mt6577_auxadc_suspend,
>> > + .resume = mt6577_auxadc_resume,
>> > +};
>> > +
>> Use the SIMPLE_SYSTEM_PM_OPS macro to make these assignments
>magically go away
>> if PM_CONFIG_SLEEP is not defined.
>
>==> ok, We will use SIMPLE_DEV_PM_OPS macro to change it in v2. Thanks.
>>> static const struct of_device_id mt6577_auxadc_of_match[] = {
>> > { .compatible = "mediatek,mt2701-auxadc", },
>> > { .compatible = "mediatek,mt8173-auxadc", },
>> > @@ -280,6 +316,7 @@ static int mt6577_auxadc_remove(struct
>platform_device *pdev)
>> > .driver = {
>> > .name = "mt6577-auxadc",
>> > .of_match_table = mt6577_auxadc_of_match,
>> > + .pm = &mt6577_auxadc_pm_ops,
>> > },
>> > .probe = mt6577_auxadc_probe,
>> > .remove = mt6577_auxadc_remove,
>>
>
>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>the body of a message to majordomo@xxxxxxxxxxxxxxx
>More majordomo info at http://vger.kernel.org/majordomo-info.html

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.