[PATCH 1/2] irqchip: RISC-V Local Interrupt Controller Driver

[Palmer Dabbelt]

This patch adds a driver that manages the local interrupts on each
RISC-V hart, as specifiec by the RISC-V supervisor level ISA manual.
The local interrupt controller manages software interrupts, timer
interrupts, and hardware interrupts (which are routed via the
platform level interrupt controller).  Per-hart local interrupt
controllers are found on all RISC-V systems.

Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxxx>
---
 drivers/irqchip/Kconfig          |  14 +++
 drivers/irqchip/Makefile         |   1 +
 drivers/irqchip/irq-riscv-intc.c | 239 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 254 insertions(+)
 create mode 100644 drivers/irqchip/irq-riscv-intc.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 478f8ace2664..c25a75325acb 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -301,3 +301,17 @@ config QCOM_IRQ_COMBINER
 	help
 	  Say yes here to add support for the IRQ combiner devices embedded
 	  in Qualcomm Technologies chips.
+
+config RISCV_INTC
+	def_bool y if RISCV
+	#bool "RISC-V Interrupt Controller"
+	depends on RISCV
+	default y
+	help
+	   This enables support for the local interrupt controller found in
+	   standard RISC-V systems.  The local interrupt controller handles
+	   timer interrupts, software interrupts, and hardware interrupts.
+	   Without a local interrupt controller the system will be unable to
+	   handle any interrupts, including those passed via the PLIC.
+
+	   If you don't know what to do here, say Y.
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b64c59b838a0..150aacad5e25 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -76,3 +76,4 @@ obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
+obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
new file mode 100644
index 000000000000..8150a035aada
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/ftrace.h>
+#include <linux/of.h>
+#include <linux/seq_file.h>
+
+#include <asm/ptrace.h>
+#include <asm/sbi.h>
+#include <asm/smp.h>
+
+struct riscv_irq_data {
+	struct irq_chip		chip;
+	struct irq_domain	*domain;
+	int			hart;
+	char			name[20];
+};
+DEFINE_PER_CPU(struct riscv_irq_data, riscv_irq_data);
+DEFINE_PER_CPU(atomic_long_t, riscv_early_sie);
+
+static void riscv_software_interrupt(void)
+{
+#ifdef CONFIG_SMP
+	irqreturn_t ret;
+
+	ret = handle_ipi();
+	if (ret != IRQ_NONE)
+		return;
+#endif
+
+	BUG();
+}
+
+asmlinkage void __irq_entry do_IRQ(unsigned int cause, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	struct irq_domain *domain;
+
+	irq_enter();
+
+	/* There are three classes of interrupt: timer, software, and
+	 * external devices.  We dispatch between them here.  External
+	 * device interrupts use the generic IRQ mechanisms.
+	 */
+	switch (cause) {
+	case INTERRUPT_CAUSE_TIMER:
+		riscv_timer_interrupt();
+		break;
+	case INTERRUPT_CAUSE_SOFTWARE:
+		riscv_software_interrupt();
+		break;
+	default:
+		domain = per_cpu(riscv_irq_data, smp_processor_id()).domain;
+		generic_handle_irq(irq_find_mapping(domain, cause));
+		break;
+	}
+
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+static int riscv_irqdomain_map(struct irq_domain *d, unsigned int irq,
+			       irq_hw_number_t hwirq)
+{
+	struct riscv_irq_data *data = d->host_data;
+
+	irq_set_chip_and_handler(irq, &data->chip, handle_simple_irq);
+	irq_set_chip_data(irq, data);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops riscv_irqdomain_ops = {
+	.map	= riscv_irqdomain_map,
+	.xlate	= irq_domain_xlate_onecell,
+};
+
+static void riscv_irq_mask(struct irq_data *d)
+{
+	struct riscv_irq_data *data = irq_data_get_irq_chip_data(d);
+
+	BUG_ON(smp_processor_id() != data->hart);
+	csr_clear(sie, 1 << (long)d->hwirq);
+}
+
+static void riscv_irq_unmask(struct irq_data *d)
+{
+	struct riscv_irq_data *data = irq_data_get_irq_chip_data(d);
+
+	BUG_ON(smp_processor_id() != data->hart);
+	csr_set(sie, 1 << (long)d->hwirq);
+}
+
+static void riscv_irq_enable_helper(void *d)
+{
+	riscv_irq_unmask(d);
+}
+
+static void riscv_irq_enable(struct irq_data *d)
+{
+	struct riscv_irq_data *data = irq_data_get_irq_chip_data(d);
+
+	/* There are two phases to setting up an interrupt: first we set a bit
+	 * in this bookkeeping structure, which is used by trap_init to
+	 * initialize SIE for each hart as it comes up.
+	 */
+	atomic_long_or((1 << (long)d->hwirq),
+		       &per_cpu(riscv_early_sie, data->hart));
+
+	/* The CPU is usually online, so here we just attempt to enable the
+	 * interrupt by writing SIE directly.  We need to write SIE on the
+	 * correct hart, which might be another hart.
+	 */
+	if (data->hart == smp_processor_id())
+		riscv_irq_unmask(d);
+	else if (cpu_online(data->hart))
+		smp_call_function_single(data->hart,
+					 riscv_irq_enable_helper,
+					 d,
+					 true);
+}
+
+static void riscv_irq_disable_helper(void *d)
+{
+	riscv_irq_mask(d);
+}
+
+static void riscv_irq_disable(struct irq_data *d)
+{
+	struct riscv_irq_data *data = irq_data_get_irq_chip_data(d);
+
+	/* This is the mirror of riscv_irq_enable. */
+	atomic_long_and(~(1 << (long)d->hwirq),
+			&per_cpu(riscv_early_sie, data->hart));
+	if (data->hart == smp_processor_id())
+		riscv_irq_mask(d);
+	else if (cpu_online(data->hart))
+		smp_call_function_single(data->hart,
+					 riscv_irq_disable_helper,
+					 d,
+					 true);
+}
+
+static void riscv_irq_mask_noop(struct irq_data *d) { }
+
+static void riscv_irq_unmask_noop(struct irq_data *d) { }
+
+static void riscv_irq_enable_noop(struct irq_data *d)
+{
+	struct device_node *data = irq_data_get_irq_chip_data(d);
+	u32 hart;
+
+	if (!of_property_read_u32(data, "reg", &hart))
+		printk(
+		  KERN_WARNING "enabled interrupt %d for missing hart %d (this interrupt has no handler)\n",
+		  (int)d->hwirq, hart);
+}
+
+static struct irq_chip riscv_noop_chip = {
+	.name = "riscv,cpu-intc,noop",
+	.irq_mask = riscv_irq_mask_noop,
+	.irq_unmask = riscv_irq_unmask_noop,
+	.irq_enable = riscv_irq_enable_noop,
+};
+
+static int riscv_irqdomain_map_noop(struct irq_domain *d, unsigned int irq,
+				    irq_hw_number_t hwirq)
+{
+	struct device_node *data = d->host_data;
+
+	irq_set_chip_and_handler(irq, &riscv_noop_chip, handle_simple_irq);
+	irq_set_chip_data(irq, data);
+	return 0;
+}
+
+static const struct irq_domain_ops riscv_irqdomain_ops_noop = {
+	.map    = riscv_irqdomain_map_noop,
+	.xlate  = irq_domain_xlate_onecell,
+};
+
+static int riscv_intc_init(struct device_node *node, struct device_node *parent)
+{
+	int hart;
+	struct riscv_irq_data *data;
+
+	if (parent)
+		return 0;
+
+	hart = riscv_of_processor_hart(node->parent);
+	if (hart < 0) {
+		/* If a hart is disabled, create a no-op irq domain.  Devices
+		 * may still have interrupts connected to those harts.  This is
+		 * not wrong... unless they actually load a driver that needs
+		 * it!
+		 */
+		irq_domain_add_linear(
+			node,
+			8*sizeof(uintptr_t),
+			&riscv_irqdomain_ops_noop,
+			node->parent);
+		return 0;
+	}
+
+	data = &per_cpu(riscv_irq_data, hart);
+	snprintf(data->name, sizeof(data->name), "riscv,cpu_intc,%d", hart);
+	data->hart = hart;
+	data->chip.name = data->name;
+	data->chip.irq_mask = riscv_irq_mask;
+	data->chip.irq_unmask = riscv_irq_unmask;
+	data->chip.irq_enable = riscv_irq_enable;
+	data->chip.irq_disable = riscv_irq_disable;
+	data->domain = irq_domain_add_linear(
+		node,
+		8*sizeof(uintptr_t),
+		&riscv_irqdomain_ops,
+		data);
+	WARN_ON(!data->domain);
+	printk(KERN_INFO "%s: %d local interrupts mapped\n",
+	       data->name, 8*(int)sizeof(uintptr_t));
+	return 0;
+}
+
+IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
-- 
2.13.0