[PATCH 02/14] qcom: mtd: nand: add and initialize QPIC DMA resources
From: Abhishek Sahu
Date: Thu Jun 29 2017 - 03:16:57 EST
1. The QPIC NAND uses 3 BAM channels: command, data tx and
data rx while EBI2 NAND uses only single ADM channel.
2. The EBI2 NAND uses normal register read buffer since this
buffer will be remapped with dma_map_sg. The QPIC NAND will give
register read buffer in command descriptor and the command
descriptor will be mapped with dma_map_sg so the register buffer
should be DMA coherent.
Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/mtd/qcom_nandc.txt | 25 +++--
drivers/mtd/nand/qcom_nandc.c | 106 ++++++++++++++++-----
2 files changed, 99 insertions(+), 32 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
index 5d0f7ae..87b9a56 100644
--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
@@ -9,15 +9,17 @@ Required properties:
- clock-names: must contain "core" for the core clock and "aon" for the
always on clock
- dmas: DMA specifier, consisting of a phandle to the ADM DMA
- controller node and the channel number to be used for
- NAND. Refer to dma.txt and qcom_adm.txt for more details
-- dma-names: must be "rxtx"
-- qcom,cmd-crci: must contain the ADM command type CRCI block instance
- number specified for the NAND controller on the given
- platform
-- qcom,data-crci: must contain the ADM data type CRCI block instance
- number specified for the NAND controller on the given
- platform
+ or BAM DMA controller node and the channel number to
+ be used for NAND. Refer to dma.txt, qcom_adm.txt(ADM)
+ and qcom/bam_dma.txt(BAM) for more details
+- dma-names: "rxtx" - ADM
+ "tx", "rx", "cmd" - BAM
+- qcom,cmd-crci: Only required for ADM DMA. must contain the ADM command
+ type CRCI block instance number specified for the NAND
+ controller on the given platform.
+- qcom,data-crci: Only required for ADM DMA. must contain the ADM data
+ type CRCI block instance number specified for the NAND
+ controller on the given platform.
- #address-cells: <1> - subnodes give the chip-select number
- #size-cells: <0>
@@ -95,6 +97,11 @@ nand@79b0000 {
<&gcc GCC_QPIC_AHB_CLK>;
clock-names = "core", "aon";
+ dmas = <&qpicbam 0>,
+ <&qpicbam 1>,
+ <&qpicbam 2>;
+ dma-names = "tx", "rx", "cmd";
+
#address-cells = <1>;
#size-cells = <0>;
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index f55f728..520add9 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -226,6 +226,7 @@ struct nandc_regs {
* by upper layers directly
* @buf_size/count/start: markers for chip->read_buf/write_buf functions
* @reg_read_buf: local buffer for reading back registers via DMA
+ * @reg_read_buf_phys: contains dma address for register read buffer
* @reg_read_pos: marker for data read in reg_read_buf
*
* @regs: a contiguous chunk of memory for DMA register
@@ -249,9 +250,19 @@ struct qcom_nand_controller {
struct clk *core_clk;
struct clk *aon_clk;
- struct dma_chan *chan;
- unsigned int cmd_crci;
- unsigned int data_crci;
+ union {
+ struct {
+ struct dma_chan *tx_chan;
+ struct dma_chan *rx_chan;
+ struct dma_chan *cmd_chan;
+ };
+ struct {
+ struct dma_chan *chan;
+ unsigned int cmd_crci;
+ unsigned int data_crci;
+ };
+ };
+
struct list_head desc_list;
u8 *data_buffer;
@@ -261,6 +272,7 @@ struct qcom_nand_controller {
int buf_start;
__le32 *reg_read_buf;
+ dma_addr_t reg_read_buf_phys;
int reg_read_pos;
struct nandc_regs *regs;
@@ -1956,16 +1968,48 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
if (!nandc->regs)
return -ENOMEM;
- nandc->reg_read_buf = devm_kzalloc(nandc->dev,
- MAX_REG_RD * sizeof(*nandc->reg_read_buf),
- GFP_KERNEL);
- if (!nandc->reg_read_buf)
- return -ENOMEM;
- nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
- if (!nandc->chan) {
- dev_err(nandc->dev, "failed to request slave channel\n");
- return -ENODEV;
+ if (!nandc->dma_bam_enabled) {
+ nandc->reg_read_buf =
+ devm_kzalloc(nandc->dev, MAX_REG_RD *
+ sizeof(*nandc->reg_read_buf), GFP_KERNEL);
+
+ if (!nandc->reg_read_buf)
+ return -ENOMEM;
+
+ nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
+ if (!nandc->chan) {
+ dev_err(nandc->dev,
+ "failed to request slave channel\n");
+ return -ENODEV;
+ }
+ } else {
+ nandc->reg_read_buf =
+ dmam_alloc_coherent(nandc->dev, MAX_REG_RD *
+ sizeof(*nandc->reg_read_buf),
+ &nandc->reg_read_buf_phys,
+ GFP_KERNEL);
+
+ if (!nandc->reg_read_buf)
+ return -ENOMEM;
+
+ nandc->tx_chan = dma_request_slave_channel(nandc->dev, "tx");
+ if (!nandc->tx_chan) {
+ dev_err(nandc->dev, "failed to request tx channel\n");
+ return -ENODEV;
+ }
+
+ nandc->rx_chan = dma_request_slave_channel(nandc->dev, "rx");
+ if (!nandc->rx_chan) {
+ dev_err(nandc->dev, "failed to request rx channel\n");
+ return -ENODEV;
+ }
+
+ nandc->cmd_chan = dma_request_slave_channel(nandc->dev, "cmd");
+ if (!nandc->cmd_chan) {
+ dev_err(nandc->dev, "failed to request cmd channel\n");
+ return -ENODEV;
+ }
}
INIT_LIST_HEAD(&nandc->desc_list);
@@ -1978,7 +2022,19 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
{
- dma_release_channel(nandc->chan);
+ if (nandc->dma_bam_enabled) {
+ if (nandc->tx_chan)
+ dma_release_channel(nandc->tx_chan);
+
+ if (nandc->rx_chan)
+ dma_release_channel(nandc->rx_chan);
+
+ if (nandc->cmd_chan)
+ dma_release_channel(nandc->cmd_chan);
+ } else {
+ if (nandc->chan)
+ dma_release_channel(nandc->chan);
+ }
}
/* one time setup of a few nand controller registers */
@@ -2063,16 +2119,20 @@ static int qcom_nandc_parse_dt(struct platform_device *pdev)
struct device_node *np = nandc->dev->of_node;
int ret;
- ret = of_property_read_u32(np, "qcom,cmd-crci", &nandc->cmd_crci);
- if (ret) {
- dev_err(nandc->dev, "command CRCI unspecified\n");
- return ret;
- }
+ if (!nandc->dma_bam_enabled) {
+ ret = of_property_read_u32(np, "qcom,cmd-crci",
+ &nandc->cmd_crci);
+ if (ret) {
+ dev_err(nandc->dev, "command CRCI unspecified\n");
+ return ret;
+ }
- ret = of_property_read_u32(np, "qcom,data-crci", &nandc->data_crci);
- if (ret) {
- dev_err(nandc->dev, "data CRCI unspecified\n");
- return ret;
+ ret = of_property_read_u32(np, "qcom,data-crci",
+ &nandc->data_crci);
+ if (ret) {
+ dev_err(nandc->dev, "data CRCI unspecified\n");
+ return ret;
+ }
}
return 0;
@@ -2128,7 +2188,7 @@ static int qcom_nandc_probe(struct platform_device *pdev)
ret = qcom_nandc_alloc(nandc);
if (ret)
- return ret;
+ goto err_core_clk;
ret = clk_prepare_enable(nandc->core_clk);
if (ret)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation