[PATCH 3/6] cpufreq: governor: Drop min_sampling_rate

[Viresh Kumar]

The cpufreq core and governors aren't supposed to set a limit on how
fast we want to try changing the frequency. This is currently done for
the legacy governors with help of min_sampling_rate.

At worst, we may end up setting the sampling rate to a value lower than
the rate at which frequency can be changed and then one of the CPUs in
the policy will be only changing frequency for ever.

But that is something for the user to decide and there is no need to
have special handling for such cases in the core. Leave it for the user
to figure out.

Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
 Documentation/admin-guide/pm/cpufreq.rst |  8 --------
 drivers/cpufreq/cpufreq_conservative.c   |  6 ------
 drivers/cpufreq/cpufreq_governor.c       | 10 ++--------
 drivers/cpufreq/cpufreq_governor.h       |  1 -
 drivers/cpufreq/cpufreq_ondemand.c       | 12 ------------
 include/linux/cpufreq.h                  |  2 --
 6 files changed, 2 insertions(+), 37 deletions(-)

diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst
index 09aa2e949787..6adbe1ed58b9 100644
--- a/Documentation/admin-guide/pm/cpufreq.rst
+++ b/Documentation/admin-guide/pm/cpufreq.rst
@@ -471,14 +471,6 @@ it is allowed to use (the ``scaling_max_freq`` policy limit).
 
 	# echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) > ondemand/sampling_rate
 
-
-``min_sampling_rate``
-	The minimum value of ``sampling_rate``.
-
-	Equal to 10000 (10 ms) if :c:macro:`CONFIG_NO_HZ_COMMON` and
-	:c:data:`tick_nohz_active` are both set or to 20 times the value of
-	:c:data:`jiffies` in microseconds otherwise.
-
 ``up_threshold``
 	If the estimated CPU load is above this value (in percent), the governor
 	will set the frequency to the maximum value allowed for the policy.
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 88220ff3e1c2..f20f20a77d4d 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -246,7 +246,6 @@ gov_show_one_common(sampling_rate);
 gov_show_one_common(sampling_down_factor);
 gov_show_one_common(up_threshold);
 gov_show_one_common(ignore_nice_load);
-gov_show_one_common(min_sampling_rate);
 gov_show_one(cs, down_threshold);
 gov_show_one(cs, freq_step);
 
@@ -254,12 +253,10 @@ gov_attr_rw(sampling_rate);
 gov_attr_rw(sampling_down_factor);
 gov_attr_rw(up_threshold);
 gov_attr_rw(ignore_nice_load);
-gov_attr_ro(min_sampling_rate);
 gov_attr_rw(down_threshold);
 gov_attr_rw(freq_step);
 
 static struct attribute *cs_attributes[] = {
-	&min_sampling_rate.attr,
 	&sampling_rate.attr,
 	&sampling_down_factor.attr,
 	&up_threshold.attr,
@@ -297,10 +294,7 @@ static int cs_init(struct dbs_data *dbs_data)
 	dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
 	dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
 	dbs_data->ignore_nice_load = 0;
-
 	dbs_data->tuners = tuners;
-	dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
-		jiffies_to_usecs(10);
 
 	return 0;
 }
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 47e24b5384b3..858081f9c3d7 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -47,14 +47,11 @@ ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
 {
 	struct dbs_data *dbs_data = to_dbs_data(attr_set);
 	struct policy_dbs_info *policy_dbs;
-	unsigned int rate;
 	int ret;
-	ret = sscanf(buf, "%u", &rate);
+	ret = sscanf(buf, "%u", &dbs_data->sampling_rate);
 	if (ret != 1)
 		return -EINVAL;
 
-	dbs_data->sampling_rate = max(rate, dbs_data->min_sampling_rate);
-
 	/*
 	 * We are operating under dbs_data->mutex and so the list and its
 	 * entries can't be freed concurrently.
@@ -437,10 +434,7 @@ int cpufreq_dbs_governor_init(struct cpufreq_policy *policy)
 		latency = 1;
 
 	/* Bring kernel and HW constraints together */
-	dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate,
-					  MIN_LATENCY_MULTIPLIER * latency);
-	dbs_data->sampling_rate = max(dbs_data->min_sampling_rate,
-				      LATENCY_MULTIPLIER * latency);
+	dbs_data->sampling_rate = LATENCY_MULTIPLIER * latency;
 
 	if (!have_governor_per_policy())
 		gov->gdbs_data = dbs_data;
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index 7cbb07512e4c..06d9f90ede93 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -41,7 +41,6 @@ enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
 struct dbs_data {
 	struct gov_attr_set attr_set;
 	void *tuners;
-	unsigned int min_sampling_rate;
 	unsigned int ignore_nice_load;
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 3937acf7e026..6b423eebfd5d 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -319,7 +319,6 @@ gov_show_one_common(sampling_rate);
 gov_show_one_common(up_threshold);
 gov_show_one_common(sampling_down_factor);
 gov_show_one_common(ignore_nice_load);
-gov_show_one_common(min_sampling_rate);
 gov_show_one_common(io_is_busy);
 gov_show_one(od, powersave_bias);
 
@@ -329,10 +328,8 @@ gov_attr_rw(up_threshold);
 gov_attr_rw(sampling_down_factor);
 gov_attr_rw(ignore_nice_load);
 gov_attr_rw(powersave_bias);
-gov_attr_ro(min_sampling_rate);
 
 static struct attribute *od_attributes[] = {
-	&min_sampling_rate.attr,
 	&sampling_rate.attr,
 	&up_threshold.attr,
 	&sampling_down_factor.attr,
@@ -373,17 +370,8 @@ static int od_init(struct dbs_data *dbs_data)
 	if (idle_time != -1ULL) {
 		/* Idle micro accounting is supported. Use finer thresholds */
 		dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
-		/*
-		 * In nohz/micro accounting case we set the minimum frequency
-		 * not depending on HZ, but fixed (very low).
-		*/
-		dbs_data->min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
 	} else {
 		dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
-
-		/* For correct statistics, we need 10 ticks for each measure */
-		dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
-			jiffies_to_usecs(10);
 	}
 
 	dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 54dfa1bdf138..083e7f3c23dd 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -488,9 +488,7 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div,
  * ondemand governor will work on any processor with transition latency <= 10ms,
  * using appropriate sampling rate.
  */
-#define MIN_SAMPLING_RATE_RATIO		(2)
 #define LATENCY_MULTIPLIER		(1000)
-#define MIN_LATENCY_MULTIPLIER		(20)
 
 struct cpufreq_governor {
 	char	name[CPUFREQ_NAME_LEN];
-- 
2.13.0.71.gd7076ec9c9cb