Re: [PATCH v2 0/3] pwm: pwm-samsung: fix suspend/resume support

[Bartlomiej Zolnierkiewicz]

ping. Could this patchset be merged for 4.13, please?

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

On Monday, April 24, 2017 12:01:06 PM Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patchset fixes suspend/resume support in pwm-samsung
> driver (which has an effect of fixing suspend/resume support
> for PWM client drivers such as pwm-fan one). Then it removes
> no longer needed suspend/resume code from pwm-fan driver.
> 
> It was tested on Odroid-XU3 board (with few extra patches
> adding SoC/board suspend/resume support which are not in
> upstream yet).
> 
> The initial issue that has been observed on this configuration
> was that after suspend/resume operation the fan was turned on
> (while the thermal code had explicitly disabled the fan by
> calling back into pwm-fan driver before the suspend/resume).
> 
> Fixing this in the pwm-fan driver itself is not feasible since
> pwm_config()/pwm_disable() & co. API saves information about
> current state and doesn't pass the relevant values to PWM core
> if they are identical to the ones used previously (moreover PWM
> core itself does the same before calling into the PWM hardware
> driver).
> 
> Changes since v1
> (https://www.spinics.net/lists/kernel/msg2480445.html):
> - added Acked-by from Guenter to patch #3
> - fixed patch #2 to use the right variable (chip -> our_chip)
> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (3):
>   pwm: pwm-samsung: remove redundant checks from pwm_samsung_config()
>   pwm: pwm-samsung: fix suspend/resume support
>   hwmon: pwm-fan: remove no longer needed suspend/resume code
> 
>  drivers/hwmon/pwm-fan.c   | 32 ----------------------
>  drivers/pwm/pwm-samsung.c | 70 +++++++++++++++++++++++------------------------
>  2 files changed, 35 insertions(+), 67 deletions(-)