[PATCH 10/13] mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info

[Suganath Prabu S]

* Added debug prints for pcie devices in ioctl debug path. Which
will be helpful for debugging.
* Added PCIe device support for ioctl BTDHMAPPING ioctl.

Signed-off-by: Chaitra P B <chaitra.basappa@xxxxxxxxxxxx>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpt3sas_base.h      |    3 +-
 drivers/scsi/mpt3sas/mpt3sas_ctl.c       |   88 ++++++++++++++++++++----------
 drivers/scsi/mpt3sas/mpt3sas_warpdrive.c |    2 +-
 3 files changed, 61 insertions(+), 32 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 063977a..ea6e607 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -452,6 +452,7 @@ struct _internal_cmd {
 	struct completion done;
 	void	*reply;
 	void	*sense;
+	u64	*nvme_error_response;
 	u16	status;
 	u16	smid;
 };
@@ -1615,7 +1616,7 @@ void
 mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
 void
 mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
-	struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+	struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request,
 	u16 smid);
 
 /* NCQ Prio Handling Check */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 35e5c30..269c753 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -79,32 +79,6 @@ enum block_state {
 };
 
 /**
- * _ctl_sas_device_find_by_handle - sas device search
- * @ioc: per adapter object
- * @handle: sas device handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for sas_device based on sas_address, then return sas_device
- * object.
- */
-static struct _sas_device *
-_ctl_sas_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
-{
-	struct _sas_device *sas_device, *r;
-
-	r = NULL;
-	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
-		if (sas_device->handle != handle)
-			continue;
-		r = sas_device;
-		goto out;
-	}
-
- out:
-	return r;
-}
-
-/**
  * _ctl_display_some_debug - debug routine
  * @ioc: per adapter object
  * @smid: system request message index
@@ -229,10 +203,9 @@ _ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
 		Mpi2SCSIIOReply_t *scsi_reply =
 		    (Mpi2SCSIIOReply_t *)mpi_reply;
 		struct _sas_device *sas_device = NULL;
-		unsigned long flags;
+		struct _pcie_device *pcie_device = NULL;
 
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = _ctl_sas_device_find_by_handle(ioc,
+		sas_device = mpt3sas_get_sdev_by_handle(ioc,
 		    le16_to_cpu(scsi_reply->DevHandle));
 		if (sas_device) {
 			pr_warn(MPT3SAS_FMT "\tsas_address(0x%016llx), phy(%d)\n",
@@ -242,8 +215,25 @@ _ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
 			    "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
 			    ioc->name, (unsigned long long)
 			    sas_device->enclosure_logical_id, sas_device->slot);
+			sas_device_put(sas_device);
+		}
+		if (!sas_device) {
+			pcie_device = mpt3sas_get_pdev_by_handle(ioc,
+				le16_to_cpu(scsi_reply->DevHandle));
+			if (pcie_device) {
+				pr_warn(MPT3SAS_FMT
+				    "\tWWID(0x%016llx), port(%d)\n", ioc->name,
+				    (unsigned long long)pcie_device->wwid,
+				    pcie_device->port_num);
+				if (pcie_device->enclosure_handle != 0)
+					pr_warn(MPT3SAS_FMT
+					    "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
+					    ioc->name, (unsigned long long)
+					    pcie_device->enclosure_logical_id,
+					    pcie_device->slot);
+				pcie_device_put(pcie_device);
+			}
 		}
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 		if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
 			pr_info(MPT3SAS_FMT
 			    "\tscsi_state(0x%02x), scsi_status"
@@ -1375,6 +1365,42 @@ _ctl_btdh_search_sas_device(struct MPT3SAS_ADAPTER *ioc,
 }
 
 /**
+ * _ctl_btdh_search_pcie_device - searching for pcie device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_pcie_device(struct MPT3SAS_ADAPTER *ioc,
+	struct mpt3_ioctl_btdh_mapping *btdh)
+{
+	struct _pcie_device *pcie_device;
+	unsigned long flags;
+	int rc = 0;
+
+	if (list_empty(&ioc->pcie_device_list))
+		return rc;
+
+	spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+	list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
+		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+			   btdh->handle == pcie_device->handle) {
+			btdh->bus = pcie_device->channel;
+			btdh->id = pcie_device->id;
+			rc = 1;
+			goto out;
+		} else if (btdh->bus == pcie_device->channel && btdh->id ==
+			   pcie_device->id && btdh->handle == 0xFFFF) {
+			btdh->handle = pcie_device->handle;
+			rc = 1;
+			goto out;
+		}
+	}
+ out:
+	spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+	return rc;
+}
+
+/**
  * _ctl_btdh_search_raid_device - searching for raid device
  * @ioc: per adapter object
  * @btdh: btdh ioctl payload
@@ -1432,6 +1458,8 @@ _ctl_btdh_mapping(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
 
 	rc = _ctl_btdh_search_sas_device(ioc, &karg);
 	if (!rc)
+		rc = _ctl_btdh_search_pcie_device(ioc, &karg);
+	if (!rc)
 		_ctl_btdh_search_raid_device(ioc, &karg);
 
 	if (copy_to_user(arg, &karg, sizeof(karg))) {
diff --git a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
index 540bd50..ced7d9f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
@@ -299,7 +299,7 @@ mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
  */
 void
 mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
-	struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+	struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request,
 	u16 smid)
 {
 	sector_t v_lba, p_lba, stripe_off, column, io_size;
-- 
1.7.1