Re: [PATCH 2/2] mm, memory_hotplug: remove zone restrictions

[Joonsoo Kim]

On Thu, Jun 29, 2017 at 09:35:09AM +0200, Michal Hocko wrote:
> From: Michal Hocko <mhocko@xxxxxxxx>
> 
> Historically we have enforced that any kernel zone (e.g ZONE_NORMAL) has
> to precede the Movable zone in the physical memory range. The purpose of
> the movable zone is, however, not bound to any physical memory restriction.
> It merely defines a class of migrateable and reclaimable memory.
> 
> There are users (e.g. CMA) who might want to reserve specific physical
> memory ranges for their own purpose. Moreover our pfn walkers have to be
> prepared for zones overlapping in the physical range already because we
> do support interleaving NUMA nodes and therefore zones can interleave as
> well. This means we can allow each memory block to be associated with a
> different zone.
> 
> Loosen the current onlining semantic and allow explicit onlining type on
> any memblock. That means that online_{kernel,movable} will be allowed
> regardless of the physical address of the memblock as long as it is
> offline of course. This might result in moveble zone overlapping with
> other kernel zones. Default onlining then becomes a bit tricky but still
> sensible. echo online > memoryXY/state will online the given block to
> 	1) the default zone if the given range is outside of any zone
> 	2) the enclosing zone if such a zone doesn't interleave with
> 	   any other zone
>         3) the default zone if more zones interleave for this range
> where default zone is movable zone only if movable_node is enabled
> otherwise it is a kernel zone.
> 
> Here is an example of the semantic with (movable_node is not present but
> it work in an analogous way). We start with following memblocks, all of
> them offline
> memory34/valid_zones:Normal Movable
> memory35/valid_zones:Normal Movable
> memory36/valid_zones:Normal Movable
> memory37/valid_zones:Normal Movable
> memory38/valid_zones:Normal Movable
> memory39/valid_zones:Normal Movable
> memory40/valid_zones:Normal Movable
> memory41/valid_zones:Normal Movable
> 
> Now, we online block 34 in default mode and block 37 as movable
> root@test1:/sys/devices/system/node/node1# echo online > memory34/state
> root@test1:/sys/devices/system/node/node1# echo online_movable > memory37/state
> memory34/valid_zones:Normal
> memory35/valid_zones:Normal Movable
> memory36/valid_zones:Normal Movable
> memory37/valid_zones:Movable
> memory38/valid_zones:Normal Movable
> memory39/valid_zones:Normal Movable
> memory40/valid_zones:Normal Movable
> memory41/valid_zones:Normal Movable
> 
> As we can see all other blocks can still be onlined both into Normal and
> Movable zones and the Normal is default because the Movable zone spans
> only block37 now.
> root@test1:/sys/devices/system/node/node1# echo online_movable > memory41/state
> memory34/valid_zones:Normal
> memory35/valid_zones:Normal Movable
> memory36/valid_zones:Normal Movable
> memory37/valid_zones:Movable
> memory38/valid_zones:Movable Normal
> memory39/valid_zones:Movable Normal
> memory40/valid_zones:Movable Normal
> memory41/valid_zones:Movable
> 
> Now the default zone for blocks 37-41 has changed because movable zone
> spans that range.
> root@test1:/sys/devices/system/node/node1# echo online_kernel > memory39/state
> memory34/valid_zones:Normal
> memory35/valid_zones:Normal Movable
> memory36/valid_zones:Normal Movable
> memory37/valid_zones:Movable
> memory38/valid_zones:Normal Movable
> memory39/valid_zones:Normal
> memory40/valid_zones:Movable Normal
> memory41/valid_zones:Movable
> 
> Note that the block 39 now belongs to the zone Normal and so block38
> falls into Normal by default as well.
> 
> For completness
> root@test1:/sys/devices/system/node/node1# for i in memory[34]?
> do
> 	echo online > $i/state 2>/dev/null
> done
> 
> memory34/valid_zones:Normal
> memory35/valid_zones:Normal
> memory36/valid_zones:Normal
> memory37/valid_zones:Movable
> memory38/valid_zones:Normal
> memory39/valid_zones:Normal
> memory40/valid_zones:Movable
> memory41/valid_zones:Movable
> 
> Implementation wise the change is quite straightforward. We can get rid
> of allow_online_pfn_range altogether. online_pages allows only offline
> nodes already. The original default_zone_for_pfn will become
> default_kernel_zone_for_pfn. New default_zone_for_pfn implements the
> above semantic. zone_for_pfn_range is slightly reorganized to implement
> kernel and movable online type explicitly and MMOP_ONLINE_KEEP becomes
> a catch all default behavior.
> 
> Signed-off-by: Michal Hocko <mhocko@xxxxxxxx>

I appreaciate your help!

Acked-by: Joonsoo Kim <iamjoonsoo.kim@xxxxxxx>

Thanks.