[PATCH v7 6/6] g_NCR5380: Two DTC436 PDMA workarounds

From: Finn Thain
Date: Mon Jul 03 2017 - 04:00:36 EST


From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>

Limit PDMA send to 512 B to avoid data corruption on DTC3181E. The
corruption is always the same: one byte missing at the beginning of
a 128 B block. It happens only with slow Quantum LPS 240 drive, not with
faster IBM DORS-32160. It's not clear what causes this. Documentation
for the DTC436 chip has not been made available.

Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/g_NCR5380.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index af7aec394778..2bb934608373 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -45,7 +45,8 @@
int c400_blk_cnt; \
int c400_host_buf; \
int io_width; \
- int pdma_residual
+ int pdma_residual; \
+ int board

#define NCR5380_dma_xfer_len generic_NCR5380_dma_xfer_len
#define NCR5380_dma_recv_setup generic_NCR5380_precv
@@ -316,6 +317,7 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
}
hostdata = shost_priv(instance);

+ hostdata->board = board;
hostdata->io = iomem;
hostdata->region_size = region_size;

@@ -492,6 +494,8 @@ static void wait_for_53c80_access(struct NCR5380_hostdata *hostdata)
int count = 10000;

do {
+ if (hostdata->board == BOARD_DTC3181E)
+ udelay(4); /* DTC436 chip hangs without this */
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
return;
} while (--count > 0);
@@ -665,7 +669,12 @@ static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,

/* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */
if (transfersize % 128)
- transfersize = 0;
+ return 0;
+
+ /* Limit PDMA send to 512 B to avoid random corruption on DTC3181E */
+ if (hostdata->board == BOARD_DTC3181E &&
+ cmd->sc_data_direction == DMA_TO_DEVICE)
+ transfersize = min(cmd->SCp.this_residual, 512);

return min(transfersize, DMA_MAX_SIZE);
}
--
2.13.0