[PATCH 0/4] thermal: imx: Add nvmem-cells binding on imx6sx

[Leonard Crestez]

On imx6sx accessing OCOTP directly is wrong because the ocotp clock needs to be
enabled first. Fix this by adding a nvmem-cells binding and using it on imx6sx,
imx6ul and imx6ull.

The existing binding is kept around because it works fine on imx6qdl.

This was initially reported by Lothar WaÃmann <LW@xxxxxxxxxxxxxxxxxxx> in reply
to a mail adding imx6ul/ull support:

Link: https://lkml.org/lkml/2017/6/9/578

A previous attempt just reinterpreted the fsl,tempmon-data phandle as nvmem.
Code was actually written to use nvmem-cells first but I thought that
reinterpreting existing devicetree properties would be interesting.

Link: https://lkml.org/lkml/2017/6/19/333

Leonard Crestez (4):
  thermal: imx: Add nvmem-cells alternate binding for OCOTP access
  thermal: imx: Add support for reading OCOTP through nvmem
  ARM: dts: imx6sx: Use nvmem-cells for tempmon
  ARM: dts: imx6ul: Add imx6ul-tempmon

 .../devicetree/bindings/thermal/imx-thermal.txt    |   7 ++
 arch/arm/boot/dts/imx6sx.dtsi                      |  11 +-
 arch/arm/boot/dts/imx6ul.dtsi                      |  17 +++
 drivers/thermal/imx_thermal.c                      | 131 ++++++++++++++++-----
 4 files changed, 135 insertions(+), 31 deletions(-)

-- 
2.7.4