[PATCH][V2] usb: storage: return on error to avoid a null pointer dereference

[Colin King]

From: Colin Ian King <colin.king@xxxxxxxxxxxxx>

When us->extra is null the driver is not initialized, however, a
later call to osd200_scsi_to_ata is made that dereferences
us->extra, causing a null pointer dereference.  The code
currently detects and reports that the driver is not initialized;
add a return to avoid the subsequent dereference issue in this
check.

Thanks to Alan Stern for pointing out that srb->result needs setting
to DID_ERROR << 16

Detected by CoverityScan, CID#100308 ("Dereference after null check")

Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
 drivers/usb/storage/isd200.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index fba4005dd737..6a7720e66595 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1529,8 +1529,11 @@ static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
 
 	/* Make sure driver was initialized */
 
-	if (us->extra == NULL)
+	if (us->extra == NULL) {
 		usb_stor_dbg(us, "ERROR Driver not initialized\n");
+		srb->result = DID_ERROR << 16;
+		return;
+	}
 
 	scsi_set_resid(srb, 0);
 	/* scsi_bufflen might change in protocol translation to ata */
-- 
2.11.0