Re: [PATCH v3 9/9] iio: adc: stm32: add support for lptimer triggers

[Jonathan Cameron]

On Fri, 7 Jul 2017 18:31:08 +0200
Fabrice Gasnier <fabrice.gasnier@xxxxxx> wrote:

> STM32 ADC supports hardware triggers like STM32 Low-Power Timer.
> For instance, STM32H7 ADC may be triggered by instances 1, 2 or 3.
> Add hardware triggered mode so Low-Power Timer Trigger driver can
> validate device.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> ---
>  drivers/iio/adc/stm32-adc.c | 14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 5bfcc1f..1147d7e 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -25,6 +25,7 @@
>  #include <linux/dmaengine.h>
>  #include <linux/iio/iio.h>
>  #include <linux/iio/buffer.h>
> +#include <linux/iio/timer/stm32-lptim-trigger.h>
>  #include <linux/iio/timer/stm32-timer-trigger.h>
>  #include <linux/iio/trigger.h>
>  #include <linux/iio/trigger_consumer.h>
> @@ -182,6 +183,11 @@ enum stm32_adc_extsel {
>  	STM32_EXT13,
>  	STM32_EXT14,
>  	STM32_EXT15,
> +	STM32_EXT16,
> +	STM32_EXT17,
> +	STM32_EXT18,
> +	STM32_EXT19,
> +	STM32_EXT20,
>  };
>  
>  /**
> @@ -480,6 +486,9 @@ struct stm32_adc_info {
>  	{ TIM4_TRGO, STM32_EXT12 },
>  	{ TIM6_TRGO, STM32_EXT13 },
>  	{ TIM3_CH4, STM32_EXT15 },
> +	{ LPTIM1_OUT, STM32_EXT18 },
> +	{ LPTIM2_OUT, STM32_EXT19 },
> +	{ LPTIM3_OUT, STM32_EXT20 },
>  	{},
>  };
>  
> @@ -995,7 +1004,8 @@ static int stm32_adc_get_trig_extsel(struct iio_dev *indio_dev,
>  		 * Checking both stm32 timer trigger type and trig name
>  		 * should be safe against arbitrary trigger names.
>  		 */
> -		if (is_stm32_timer_trigger(trig) &&
> +		if ((is_stm32_timer_trigger(trig) ||
> +		     is_stm32_lptim_trigger(trig)) &&
>  		    !strcmp(adc->cfg->trigs[i].name, trig->name)) {
>  			return adc->cfg->trigs[i].extsel;
>  		}
> @@ -1634,7 +1644,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  	indio_dev->dev.parent = &pdev->dev;
>  	indio_dev->dev.of_node = pdev->dev.of_node;
>  	indio_dev->info = &stm32_adc_iio_info;
> -	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
>  
>  	platform_set_drvdata(pdev, adc);
>