Re: [PATCH V4 5/6] iommu/arm-smmu: Add support for MMU40x/500 clocks

From: Rob Herring
Date: Sun Jul 09 2017 - 23:38:52 EST


On Thu, Jul 06, 2017 at 03:07:04PM +0530, Vivek Gautam wrote:
> From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>
> The MMU400x/500 is the implementation of the SMMUv2
> arch specification. It is split in to two blocks
> TBU, TCU. TBU caches the page table, instantiated
> for each master locally, clocked by the TBUn_clk.
> TCU manages the address translation with PTW and has
> the programming interface as well, clocked using the
> TCU_CLK. The TBU can also be sharing the same clock
> domain as TCU, in which case both are clocked using
> the TCU_CLK.

No TBU clock below. When is it shared or not? If that's an integration
option then the binding should always have a TBU clock with the same
parent as the TCU_CLK.

> This defines the clock bindings for the same and adds
> the clock names to compatible data.
>
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> [vivek: clock rework and cleanup]
> Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/iommu/arm,smmu.txt | 24 ++++++++++++++++++++++
> drivers/iommu/arm-smmu.c | 12 ++++++++++-
> 2 files changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index 8a6ffce12af5..00331752d355 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -71,6 +71,26 @@ conditions.
> or using stream matching with #iommu-cells = <2>, and
> may be ignored if present in such cases.
>
> +- clock-names: Should be "tcu" and "iface" for "arm,mmu-400",
> + "arm,mmu-401" and "arm,mmu-500"
> +
> + "tcu" clock is required for smmu's register access using the
> + programming interface and ptw for downstream bus access. This
> + clock is also used for access to the TBU connected to the
> + master locally. Sometimes however, TBU is clocked along with
> + the master.
> +
> + "iface" clock is required to access the TCU's programming
> + interface, apart from the "tcu" clock.
> +
> +- clocks: Phandles for respective clocks described by clock-names.
> +
> +- power-domains: Phandles to SMMU's power domain specifier. This is
> + required even if SMMU belongs to the master's power
> + domain, as the SMMU will have to be enabled and
> + accessed before master gets enabled and linked to its
> + SMMU.
> +
> ** Deprecated properties:
>
> - mmu-masters (deprecated in favour of the generic "iommus" binding) :
> @@ -95,6 +115,10 @@ conditions.
> <0 36 4>,
> <0 37 4>;
> #iommu-cells = <1>;
> + clocks = <&gcc GCC_SMMU_CFG_CLK>,
> + <&gcc GCC_APSS_TCU_CLK>;
> +
> + clock-names = "iface", "tcu";
> };
>
> /* device with two stream IDs, 0 and 7 */
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index 75567d9698ab..7bb09280fa11 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -1947,9 +1947,19 @@ struct arm_smmu_match_data {
> ARM_SMMU_MATCH_DATA(smmu_generic_v1, ARM_SMMU_V1, GENERIC_SMMU);
> ARM_SMMU_MATCH_DATA(smmu_generic_v2, ARM_SMMU_V2, GENERIC_SMMU);
> ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, GENERIC_SMMU);
> -ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500);
> ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2);
>
> +static const char * const arm_mmu500_clks[] = {
> + "tcu", "iface",
> +};
> +
> +static const struct arm_smmu_match_data arm_mmu500 = {
> + .version = ARM_SMMU_V2,
> + .model = ARM_MMU500,
> + .clks = arm_mmu500_clks,
> + .num_clks = ARRAY_SIZE(arm_mmu500_clks),
> +};
> +
> static const struct of_device_id arm_smmu_of_match[] = {
> { .compatible = "arm,smmu-v1", .data = &smmu_generic_v1 },
> { .compatible = "arm,smmu-v2", .data = &smmu_generic_v2 },
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>