[PATCH V2 00/10] add clock driver for Spreadtrum platforms

From: Chunyan Zhang
Date: Tue Jul 11 2017 - 07:01:16 EST


This is a rewrite of Spreadtrum's original clock driver[1] according to the
comments[2] from Stephen Boyd.

This series adds Spreadtrum clock support together with its binding
documentation and devicetree data.

Any comments would be greatly appreciated.

Thanks,
Chunyan

Changes from V1 (https://lkml.org/lkml/2017/6/17/356):
* Address Stephen's comments:
- Switch to use platform device driver instead of the DT probing mechanism.
- Move the common clock macro out from vendor directory, but need to remove those
overlap code from other vendors (such as sunxi-ng) once this gets merged.
- Add support to be built as a module.
- Add 'sprd_' prefix for all spin locks used in these drivers.
- Mark input parameter of sprd_x with const.
- Remove unreasonable dependencies to CONFIG_64BIT.
- Add readl() after writing the same register.
- Remove CLK_IS_BASIC which is no longer used.
- Remove unnecessary CLK_IGNORE_UNUSED when defining a clock.
- Change to expose all clock index.
- Use clk_ instead of ccu.
- Add Kconfig for sprd clocks.
- Move the fixed clocks out from the soc node.
- Switch to use 64-bit math in pll driver instead of 32-bit math.
* Revise binding documentation according to dt modification.
* Rename sc9860.c to sc9860-clk.c


[1] https://lwn.net/Articles/722739/
[2] https://www.spinics.net/lists/arm-kernel/msg582017.html


Chunyan Zhang (10):
drivers: move clock common macros out from vendor directories
dt-bindings: Add Spreadtrum clock binding documentation
clk: sprd: Add common infrastructure
clk: sprd: add gate clock support
clk: sprd: add mux clock support
clk: sprd: add divider clock support
clk: sprd: add composite clock support
clk: sprd: add adjustable pll support
clk: sprd: add clocks support for SC9860
arm64: dts: add clocks for SC9860

Documentation/devicetree/bindings/clock/sprd.txt | 36 +
arch/arm64/boot/dts/sprd/sc9860.dtsi | 22 +
arch/arm64/boot/dts/sprd/whale2.dtsi | 3 +-
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/clk_common.h | 60 +
drivers/clk/sprd/Kconfig | 14 +
drivers/clk/sprd/Makefile | 11 +
drivers/clk/sprd/common.c | 83 ++
drivers/clk/sprd/common.h | 56 +
drivers/clk/sprd/composite.c | 64 +
drivers/clk/sprd/composite.h | 47 +
drivers/clk/sprd/div.c | 98 ++
drivers/clk/sprd/div.h | 77 +
drivers/clk/sprd/gate.c | 104 ++
drivers/clk/sprd/gate.h | 58 +
drivers/clk/sprd/mux.c | 86 ++
drivers/clk/sprd/mux.h | 63 +
drivers/clk/sprd/pll.c | 236 +++
drivers/clk/sprd/pll.h | 133 ++
drivers/clk/sprd/sc9860-clk.c | 1726 ++++++++++++++++++++++
include/dt-bindings/clock/sprd,sc9860-clk.h | 375 +++++
22 files changed, 3352 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
create mode 100644 drivers/clk/clk_common.h
create mode 100644 drivers/clk/sprd/Kconfig
create mode 100644 drivers/clk/sprd/Makefile
create mode 100644 drivers/clk/sprd/common.c
create mode 100644 drivers/clk/sprd/common.h
create mode 100644 drivers/clk/sprd/composite.c
create mode 100644 drivers/clk/sprd/composite.h
create mode 100644 drivers/clk/sprd/div.c
create mode 100644 drivers/clk/sprd/div.h
create mode 100644 drivers/clk/sprd/gate.c
create mode 100644 drivers/clk/sprd/gate.h
create mode 100644 drivers/clk/sprd/mux.c
create mode 100644 drivers/clk/sprd/mux.h
create mode 100644 drivers/clk/sprd/pll.c
create mode 100644 drivers/clk/sprd/pll.h
create mode 100644 drivers/clk/sprd/sc9860-clk.c
create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h

--
2.7.4