[PATCH v4 0/3] Add support for the s6e63j0x03 panel on Rinato board

[Hoegeun Kwon]

Hi Andrzej,

Thank you for your review.

The purpose of this patch is add support for s6e63j0x03 AMOLED panel
on the rinato board(Samsung Galaxy Gear 2).

Changes for V4:
- Added Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> (2/3 patch).
- Fixed the style of macro function.

Changes for V3:
- Applied patch 'ARM: dts: exynos: Fix the active of reset gpios from rinato dts' (v2 3/4)
- Remove the unnecessary define ('MIN_BRIGHTNESS')
- Removed explicit casting.
- Removed violation of kernel coding style.

Changes for V2:
- Added the interface info in binding document.
- Added Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> (1/3 patch).
- Added Acked-by: Rob Herring <robh@xxxxxxxxxx> (1/3 patch).
- Fixed the tristate of config from video mode to command mode.
- Fixed the reset gpios from active high to low from rinato dts.
- Fixed a lot of things in panel driver, reflect Andrzej's review.

Best regards,
Hoegeun

Hoegeun Kwon (3):
  dt-bindings: Add support for samsung s6e63j0x03 panel binding
  drm/panel: Add support for s6e63j0x03 panel driver
  ARM: dts: exynos: Remove the display-timing and delay from rinato dts

 .../bindings/display/panel/samsung,s6e63j0x03.txt  |  24 +
 arch/arm/boot/dts/exynos3250-rinato.dts            |  22 -
 drivers/gpu/drm/panel/Kconfig                      |   7 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c   | 532 +++++++++++++++++++++
 5 files changed, 564 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
 create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c

-- 
1.9.1