[PATCH linux v4 0/3] Export 1-wire thermal sensors as hwmon device

From: Jaghathiswari Rankappagounder Natarajan
Date: Thu Jul 13 2017 - 18:41:19 EST

Our board has 4 DS18B20 1-wire temperature sensors. Each 1-wire bus and the
sensor under it is already configured against the Linux 1-wire driver
(called w1). They have a sysfs file(e.g.
/sys/bus/w1/devices/w1_bus_master1/28-000007704f4c/w1_slave) which, when read,
runs code to read the temperature. We'd like the temperatures to show up in
hwmon, so that the BMC IPMI sensor plumbing can forward those to host.

This patch(version 4) is to address the comments provided by Guenter for
version 3. The changes in version 4 are mentioned in the individual patches.

This patchset is based on linux mainline version v4.10.

Yes; On a board with 4 DS18B20 1-wire temperature sensors:
root@zaius:/sys/class/hwmon# ls
hwmon0 hwmon1 hwmon2 hwmon3 hwmon4 hwmon5
root@zaius:/sys/class/hwmon# cd hwmon0
root@zaius:/sys/class/hwmon/hwmon0# ls
device name subsystem temp1_input uevent
root@zaius:/sys/class/hwmon/hwmon0# cat temp1_input
root@zaius:/sys/class/hwmon/hwmon0# cd ..
root@zaius:/sys/class/hwmon# cd hwmon1
root@zaius:/sys/class/hwmon/hwmon1# cat temp1_input
root@zaius:/sys/class/hwmon/hwmon1# cd ..
root@zaius:/sys/class/hwmon# cd hwmon2
root@zaius:/sys/class/hwmon/hwmon2# cat temp1_input
root@zaius:/sys/class/hwmon/hwmon2# cd ..
root@zaius:/sys/class/hwmon# cd hwmon3
root@zaius:/sys/class/hwmon/hwmon3# cat temp1_input

Jaghathiswari Rankappagounder Natarajan (3):
drivers: w1: add hwmon support structures
drivers: w1: refactor w1_slave_show to make the temp reading
functionality separate
drivers: w1: add hwmon temp support for w1_therm

drivers/w1/slaves/w1_therm.c | 164 +++++++++++++++++++++++++++++++++++--------
drivers/w1/w1.c | 18 ++++-
drivers/w1/w1.h | 2 +
drivers/w1/w1_family.h | 2 +
4 files changed, 156 insertions(+), 30 deletions(-)