Re: [PATCH 2/2] mfd: ds1374: Add Dallas/Maxim DS1374 Multi Function Device
From: Guenter Roeck
Date: Thu Jul 13 2017 - 23:58:14 EST
On 07/13/2017 12:54 PM, Moritz Fischer wrote:
From: Moritz Fischer <moritz.fischer@xxxxxxxxx>
Add support for the Maxim/Dallas DS1374 RTC/WDT with trickle charger.
The device can either be configured as simple RTC, as simple RTC with
Alarm (IRQ) as well as simple RTC with watchdog timer.
Break up the old monolithic driver in drivers/rtc/rtc-ds1374.c into:
- rtc part in drivers/rtc/rtc-ds1374.c
- watchdog part under drivers/watchdog/ds1374-wdt.c
- mfd part drivers/mfd/ds1374.c
The MFD part takes care of trickle charging and mode selection,
since the usage modes of a) RTC + Alarm or b) RTC + WDT
are mutually exclusive.
Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx>
[ Only reviewing watchdog part ]
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ds1374.c | 260 ++++++++++++++++
drivers/rtc/rtc-ds1374.c | 639 ++++++++++-----------------------------
drivers/watchdog/Kconfig | 10 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/ds1374-wdt.c | 208 +++++++++++++
include/dt-bindings/mfd/ds1374.h | 17 ++
include/linux/mfd/ds1374.h | 59 ++++
9 files changed, 722 insertions(+), 483 deletions(-)
create mode 100644 drivers/mfd/ds1374.c
create mode 100644 drivers/watchdog/ds1374-wdt.c
create mode 100644 include/dt-bindings/mfd/ds1374.h
create mode 100644 include/linux/mfd/ds1374.h
If possible, it might be better to split the patch into multiple parts, one per subsystem.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3eb5c93..2dfef3c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -203,6 +203,16 @@ config MFD_CROS_EC_SPI
response time cannot be guaranteed, we support ignoring
'pre-amble' bytes before the response actually starts.
+config MFD_DS1374
+ tristate "Dallas/Maxim DS1374 RTC/WDT/ALARM (I2C)"
+ select MFD_CORE
+ depends on I2C
+ depends on REGMAP_I2C
+
+ ---help---
+ This driver supports the Dallas Maxim DS1374 multi function chip.
+ The chip combines an RTC, trickle charger, Watchdog or Alarm.
+
config MFD_ASIC3
bool "Compaq ASIC3"
depends on GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c16bf1e..b5cfcf4 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,7 @@ cros_ec_core-$(CONFIG_ACPI) += cros_ec_acpi_gpe.o
obj-$(CONFIG_MFD_CROS_EC) += cros_ec_core.o
obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
+obj-$(CONFIG_MFD_DS1374) += ds1374.o
obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
diff --git a/drivers/mfd/ds1374.c b/drivers/mfd/ds1374.c
new file mode 100644
index 0000000..a0cfa1b
--- /dev/null
+++ b/drivers/mfd/ds1374.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (c) 2017, National Instruments Corp.
+ *
+ * Dallas/Maxim DS1374 Multi Function Device Driver
+ *
+ * The trickle charger code was taken more ore less 1:1 from
+ * drivers/rtc/rtc-1390.c
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ds1374.h>
+
+#define DS1374_TRICKLE_CHARGER_ENABLE 0xa0
+#define DS1374_TRICKLE_CHARGER_ENABLE_MASK 0xe0
+
+#define DS1374_TRICKLE_CHARGER_250_OHM 0x01
+#define DS1374_TRICKLE_CHARGER_2K_OHM 0x02
+#define DS1374_TRICKLE_CHARGER_4K_OHM 0x03
+#define DS1374_TRICKLE_CHARGER_ROUT_MASK 0x03
+
+#define DS1374_TRICKLE_CHARGER_NO_DIODE 0x04
+#define DS1374_TRICKLE_CHARGER_DIODE 0x08
+#define DS1374_TRICKLE_CHARGER_DIODE_MASK 0xc
+
+static const struct regmap_range volatile_ranges[] = {
+ regmap_reg_range(DS1374_REG_TOD0, DS1374_REG_WDALM2),
+ regmap_reg_range(DS1374_REG_SR, DS1374_REG_SR),
+};
+
+static const struct regmap_access_table ds1374_volatile_table = {
+ .yes_ranges = volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(volatile_ranges),
+};
+
+static struct regmap_config ds1374_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = DS1374_REG_TCR,
+ .volatile_table = &ds1374_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static struct mfd_cell ds1374_wdt_cell = {
+ .name = "ds1374-wdt",
+};
+
+static struct mfd_cell ds1374_rtc_cell = {
+ .name = "ds1374-rtc",
+};
+
+static int ds1374_add_device(struct ds1374 *chip,
+ struct mfd_cell *cell)
+{
+ cell->platform_data = chip;
+ cell->pdata_size = sizeof(*chip);
+
+ return mfd_add_devices(&chip->client->dev, PLATFORM_DEVID_AUTO,
+ cell, 1, NULL, 0, NULL);
+}
+
+static int ds1374_trickle_of_init(struct ds1374 *ds1374)
+{
+ u32 ohms = 0;
+ u8 value;
+ struct i2c_client *client = ds1374->client;
+
+ if (of_property_read_u32(client->dev.of_node, "trickle-resistor-ohms",
+ &ohms))
+ return 0;
+
+ /* Enable charger */
+ value = DS1374_TRICKLE_CHARGER_ENABLE;
+ if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable"))
+ value |= DS1374_TRICKLE_CHARGER_NO_DIODE;
+ else
+ value |= DS1374_TRICKLE_CHARGER_DIODE;
+
+ /* Resistor select */
+ switch (ohms) {
+ case 250:
+ value |= DS1374_TRICKLE_CHARGER_250_OHM;
+ break;
+ case 2000:
+ value |= DS1374_TRICKLE_CHARGER_2K_OHM;
+ break;
+ case 4000:
+ value |= DS1374_TRICKLE_CHARGER_4K_OHM;
+ break;
+ default:
+ dev_warn(&client->dev,
+ "Unsupported ohm value %02ux in dt\n", ohms);
+ return -EINVAL;
+ }
+ dev_dbg(&client->dev, "Trickle charge value is 0x%02x\n", value);
+
+ return regmap_write(ds1374->regmap, DS1374_REG_TCR, value);
+}
+
+int ds1374_read_bulk(struct ds1374 *ds1374, u32 *time, int reg, int nbytes)
+{
+ u8 buf[4];
+ int ret;
+ int i;
+
+ if (WARN_ON(nbytes > 4))
+ return -EINVAL;
+
+ ret = regmap_bulk_read(ds1374->regmap, reg, buf, nbytes);
+ if (ret) {
+ dev_err(&ds1374->client->dev,
+ "Failed to bulkread n = %d at R%d\n",
+ nbytes, reg);
+ return ret;
+ }
+
+ for (i = nbytes - 1, *time = 0; i >= 0; i--)
+ *time = (*time << 8) | buf[i];
+
I think those functions should go away; the calling code can use standard
endianness conversion functions and call regmap_bulk_{read,write} directly.
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ds1374_read_bulk);
+
+int ds1374_write_bulk(struct ds1374 *ds1374, u32 time, int reg, int nbytes)
+{
+ u8 buf[4];
+ int i;
+
+ if (nbytes > 4) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < nbytes; i++) {
+ buf[i] = time & 0xff;
+ time >>= 8;
+ }
+
+ return regmap_bulk_write(ds1374->regmap, reg, buf, nbytes);
+}
+EXPORT_SYMBOL_GPL(ds1374_write_bulk);
+
+static int ds1374_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds1374 *ds1374;
+ u32 mode;
+ int err;
+
+ ds1374 = devm_kzalloc(&client->dev, sizeof(struct ds1374), GFP_KERNEL);
+ if (!ds1374)
+ return -ENOMEM;
+
+ ds1374->regmap = devm_regmap_init_i2c(client, &ds1374_regmap_config);
+ if (IS_ERR(ds1374->regmap))
+ return PTR_ERR(ds1374->regmap);
+
+ if (IS_ENABLED(CONFIG_OF) && client->dev.of_node) {
+ err = of_property_read_u32(client->dev.of_node,
+ "dallas,mode", &mode);
+ if (err < 0) {
+ dev_err(&client->dev, "missing dallas,mode property\n");
+ return -EINVAL;
+ }
+
+ ds1374->remapped_reset
+ = of_property_read_bool(client->dev.of_node,
+ "dallas,remap-reset");
+
+ ds1374->mode = (enum ds1374_mode)mode;
+ } else if (IS_ENABLED(CONFIG_RTC_DRV_DS1374_WDT)) {
+ ds1374->mode = DS1374_MODE_RTC_WDT;
+ } else {
+ ds1374->mode = DS1374_MODE_RTC_ALM;
+ }
+
+ ds1374->client = client;
+ ds1374->irq = client->irq;
+ i2c_set_clientdata(client, ds1374);
+
+ /* check if we're supposed to trickle charge */
+ err = ds1374_trickle_of_init(ds1374);
+ if (err) {
+ dev_err(&client->dev, "Failed to init trickle charger!\n");
+ return err;
+ }
+
+ /* we always have a rtc */
+ err = ds1374_add_device(ds1374, &ds1374_rtc_cell);
+ if (err)
+ return err;
+
+ /* we might have a watchdog if configured that way */
+ if (ds1374->mode == DS1374_MODE_RTC_WDT)
+ return ds1374_add_device(ds1374, &ds1374_wdt_cell);
+
+ return err;
+}
+
+static const struct i2c_device_id ds1374_id[] = {
+ { "ds1374", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1374_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1374_of_match[] = {
+ { .compatible = "dallas,ds1374" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ds1374_of_match);
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int ds1374_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int ds1374_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume);
+
+static struct i2c_driver ds1374_driver = {
+ .driver = {
+ .name = "ds1374",
+ .of_match_table = of_match_ptr(ds1374_of_match),
+ .pm = &ds1374_pm,
+ },
+ .probe = ds1374_probe,
+ .id_table = ds1374_id,
+};
+
+static int __init ds1374_init(void)
+{
+ return i2c_add_driver(&ds1374_driver);
+}
+subsys_initcall(ds1374_init);
+
+static void __exit ds1374_exit(void)
+{
+ i2c_del_driver(&ds1374_driver);
+}
+module_exit(ds1374_exit);
+
+MODULE_AUTHOR("Moritz Fischer <mdf@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Maxim/Dallas DS1374 MFD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 52429f0..29ce1a9 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -1,75 +1,38 @@
/*
- * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C
+ * RTC driver for the Maxim/Dallas DS1374 Real-Time Clock via MFD
*
* Based on code by Randy Vinson <rvinson@xxxxxxxxxx>,
* which was based on the m41t00.c by Mark Greer <mgreer@xxxxxxxxxx>.
*
+ * Copyright (C) 2017 National Instruments Corp
* Copyright (C) 2014 Rose Technology
* Copyright (C) 2006-2007 Freescale Semiconductor
*
+ * SPDX-License-Identifier: GPL-2.0
+ *
* 2005 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-/*
- * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
- * recommened in .../Documentation/i2c/writing-clients section
- * "Sending and receiving", using SMBus level communication is preferred.
- */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
#include <linux/pm.h>
-#ifdef CONFIG_RTC_DRV_DS1374_WDT
-#include <linux/fs.h>
-#include <linux/ioctl.h>
-#include <linux/miscdevice.h>
-#include <linux/reboot.h>
-#include <linux/watchdog.h>
-#endif
-
-#define DS1374_REG_TOD0 0x00 /* Time of Day */
-#define DS1374_REG_TOD1 0x01
-#define DS1374_REG_TOD2 0x02
-#define DS1374_REG_TOD3 0x03
-#define DS1374_REG_WDALM0 0x04 /* Watchdog/Alarm */
-#define DS1374_REG_WDALM1 0x05
-#define DS1374_REG_WDALM2 0x06
-#define DS1374_REG_CR 0x07 /* Control */
-#define DS1374_REG_CR_AIE 0x01 /* Alarm Int. Enable */
-#define DS1374_REG_CR_WDALM 0x20 /* 1=Watchdog, 0=Alarm */
-#define DS1374_REG_CR_WACE 0x40 /* WD/Alarm counter enable */
-#define DS1374_REG_SR 0x08 /* Status */
-#define DS1374_REG_SR_OSF 0x80 /* Oscillator Stop Flag */
-#define DS1374_REG_SR_AF 0x01 /* Alarm Flag */
-#define DS1374_REG_TCR 0x09 /* Trickle Charge */
-
-static const struct i2c_device_id ds1374_id[] = {
- { "ds1374", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ds1374_id);
+#include <linux/regmap.h>
+#include <linux/mfd/ds1374.h>
+#include <linux/platform_device.h>
-#ifdef CONFIG_OF
-static const struct of_device_id ds1374_of_match[] = {
- { .compatible = "dallas,ds1374" },
- { }
-};
-MODULE_DEVICE_TABLE(of, ds1374_of_match);
-#endif
-
-struct ds1374 {
- struct i2c_client *client;
+struct ds1374_rtc {
struct rtc_device *rtc;
+ struct ds1374 *chip;
struct work_struct work;
/* The mutex protects alarm operations, and prevents a race
@@ -80,89 +43,44 @@ struct ds1374 {
int exiting;
};
-static struct i2c_driver ds1374_driver;
-
-static int ds1374_read_rtc(struct i2c_client *client, u32 *time,
- int reg, int nbytes)
-{
- u8 buf[4];
- int ret;
- int i;
-
- if (WARN_ON(nbytes > 4))
- return -EINVAL;
-
- ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf);
-
- if (ret < 0)
- return ret;
- if (ret < nbytes)
- return -EIO;
-
- for (i = nbytes - 1, *time = 0; i >= 0; i--)
- *time = (*time << 8) | buf[i];
-
- return 0;
-}
-
-static int ds1374_write_rtc(struct i2c_client *client, u32 time,
- int reg, int nbytes)
-{
- u8 buf[4];
- int i;
-
- if (nbytes > 4) {
- WARN_ON(1);
- return -EINVAL;
- }
-
- for (i = 0; i < nbytes; i++) {
- buf[i] = time & 0xff;
- time >>= 8;
- }
-
- return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf);
-}
-
-static int ds1374_check_rtc_status(struct i2c_client *client)
+static int ds1374_check_rtc_status(struct ds1374_rtc *ds1374)
{
int ret = 0;
- int control, stat;
+ unsigned int control, stat;
- stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
- if (stat < 0)
+ ret = regmap_read(ds1374->chip->regmap, DS1374_REG_SR, &stat);
+ if (ret)
return stat;
if (stat & DS1374_REG_SR_OSF)
- dev_warn(&client->dev,
+ dev_warn(&ds1374->chip->client->dev,
"oscillator discontinuity flagged, time unreliable\n");
- stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF);
-
- ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
- if (ret < 0)
+ ret = regmap_update_bits(ds1374->chip->regmap, DS1374_REG_SR,
+ DS1374_REG_SR_OSF | DS1374_REG_SR_AF, 0);
+ if (ret)
return ret;
/* If the alarm is pending, clear it before requesting
* the interrupt, so an interrupt event isn't reported
* before everything is initialized.
*/
-
- control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
- if (control < 0)
- return control;
+ ret = regmap_read(ds1374->chip->regmap, DS1374_REG_CR, &control);
+ if (ret)
+ return ret;
control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
- return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
+ return regmap_write(ds1374->chip->regmap, DS1374_REG_CR, control);
}
static int ds1374_read_time(struct device *dev, struct rtc_time *time)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ds1374_rtc *ds1374_rtc = platform_get_drvdata(pdev);
u32 itime;
int ret;
- ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4);
+ ret = ds1374_read_bulk(ds1374_rtc->chip, &itime, DS1374_REG_TOD0, 4);
if (!ret)
rtc_time_to_tm(itime, time);
@@ -171,44 +89,47 @@ static int ds1374_read_time(struct device *dev, struct rtc_time *time)
static int ds1374_set_time(struct device *dev, struct rtc_time *time)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ds1374_rtc *ds1374_rtc = platform_get_drvdata(pdev);
unsigned long itime;
rtc_tm_to_time(time, &itime);
- return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4);
+ return ds1374_write_bulk(ds1374_rtc->chip, itime, DS1374_REG_TOD0, 4);
}
-#ifndef CONFIG_RTC_DRV_DS1374_WDT
/* The ds1374 has a decrementer for an alarm, rather than a comparator.
* If the time of day is changed, then the alarm will need to be
* reset.
*/
static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1374 *ds1374 = i2c_get_clientdata(client);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ds1374_rtc *ds1374_rtc = platform_get_drvdata(pdev);
+ struct ds1374 *ds1374 = ds1374_rtc->chip;
+
u32 now, cur_alarm;
- int cr, sr;
+ unsigned int cr, sr;
int ret = 0;
- if (client->irq <= 0)
+ if (ds1374->irq <= 0)
return -EINVAL;
- mutex_lock(&ds1374->mutex);
+ mutex_lock(&ds1374_rtc->mutex);
- cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
+ ret = regmap_read(ds1374->regmap, DS1374_REG_CR, &cr);
if (ret < 0)
goto out;
- sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
+ ret = regmap_read(ds1374->regmap, DS1374_REG_SR, &sr);
if (ret < 0)
goto out;
- ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4);
+ ret = ds1374_read_bulk(ds1374_rtc->chip, &now, DS1374_REG_TOD0, 4);
if (ret)
goto out;
- ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3);
+ ret = ds1374_read_bulk(ds1374_rtc->chip, &cur_alarm,
+ DS1374_REG_WDALM0, 3);
if (ret)
goto out;
@@ -217,20 +138,21 @@ static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
alarm->pending = !!(sr & DS1374_REG_SR_AF);
out:
- mutex_unlock(&ds1374->mutex);
+ mutex_unlock(&ds1374_rtc->mutex);
return ret;
}
static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1374 *ds1374 = i2c_get_clientdata(client);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ds1374_rtc *ds1374_rtc = platform_get_drvdata(pdev);
+ struct ds1374 *ds1374 = ds1374_rtc->chip;
+
struct rtc_time now;
unsigned long new_alarm, itime;
- int cr;
int ret = 0;
- if (client->irq <= 0)
+ if (ds1374->irq <= 0)
return -EINVAL;
ret = ds1374_read_time(dev, &now);
@@ -251,468 +173,219 @@ static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
else
new_alarm -= itime;
- mutex_lock(&ds1374->mutex);
-
- ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
- if (ret < 0)
- goto out;
+ mutex_lock(&ds1374_rtc->mutex);
/* Disable any existing alarm before setting the new one
- * (or lack thereof). */
- cr &= ~DS1374_REG_CR_WACE;
-
- ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
- if (ret < 0)
- goto out;
+ * (or lack thereof).
+ */
+ ret = regmap_update_bits(ds1374->regmap, DS1374_REG_CR,
+ DS1374_REG_CR_WACE, 0);
- ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3);
+ ret = ds1374_write_bulk(ds1374_rtc->chip, new_alarm,
+ DS1374_REG_WDALM0, 3);
if (ret)
goto out;
if (alarm->enabled) {
- cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
- cr &= ~DS1374_REG_CR_WDALM;
-
- ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
+ ret = regmap_update_bits(ds1374->regmap, DS1374_REG_CR,
+ DS1374_REG_CR_WACE | DS1374_REG_CR_AIE
+ | DS1374_REG_CR_WDALM,
+ DS1374_REG_CR_WACE
+ | DS1374_REG_CR_AIE);
}
out:
- mutex_unlock(&ds1374->mutex);
+ mutex_unlock(&ds1374_rtc->mutex);
return ret;
}
-#endif
static irqreturn_t ds1374_irq(int irq, void *dev_id)
{
- struct i2c_client *client = dev_id;
- struct ds1374 *ds1374 = i2c_get_clientdata(client);
+ struct ds1374_rtc *ds1374_rtc = dev_id;
disable_irq_nosync(irq);
- schedule_work(&ds1374->work);
+ schedule_work(&ds1374_rtc->work);
return IRQ_HANDLED;
}
static void ds1374_work(struct work_struct *work)
{
- struct ds1374 *ds1374 = container_of(work, struct ds1374, work);
- struct i2c_client *client = ds1374->client;
- int stat, control;
+ struct ds1374_rtc *ds1374_rtc = container_of(work, struct ds1374_rtc,
+ work);
+ unsigned int stat;
+ int ret;
- mutex_lock(&ds1374->mutex);
+ mutex_lock(&ds1374_rtc->mutex);
- stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
- if (stat < 0)
+ ret = regmap_read(ds1374_rtc->chip->regmap, DS1374_REG_SR, &stat);
+ if (ret)
goto unlock;
if (stat & DS1374_REG_SR_AF) {
- stat &= ~DS1374_REG_SR_AF;
- i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
-
- control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
- if (control < 0)
+ regmap_update_bits(ds1374_rtc->chip->regmap, DS1374_REG_SR,
+ DS1374_REG_SR_AF, 0);
+
+ ret = regmap_update_bits(ds1374_rtc->chip->regmap,
+ DS1374_REG_CR, DS1374_REG_CR_WACE
+ | DS1374_REG_CR_AIE,
+ 0);
+ if (ret)
goto out;
- control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
- i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
-
- rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF);
+ rtc_update_irq(ds1374_rtc->rtc, 1, RTC_AF | RTC_IRQF);
}
out:
- if (!ds1374->exiting)
- enable_irq(client->irq);
+ if (!ds1374_rtc->exiting)
+ enable_irq(ds1374_rtc->chip->irq);
unlock:
- mutex_unlock(&ds1374->mutex);
+ mutex_unlock(&ds1374_rtc->mutex);
}
-#ifndef CONFIG_RTC_DRV_DS1374_WDT
static int ds1374_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1374 *ds1374 = i2c_get_clientdata(client);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ds1374_rtc *ds1374 = platform_get_drvdata(pdev);
+ unsigned int cr;
int ret;
mutex_lock(&ds1374->mutex);
- ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
+ ret = regmap_read(ds1374->chip->regmap, DS1374_REG_CR, &cr);
if (ret < 0)
goto out;
- if (enabled) {
- ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
- ret &= ~DS1374_REG_CR_WDALM;
- } else {
- ret &= ~DS1374_REG_CR_WACE;
- }
- ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret);
-
+ if (enabled)
+ regmap_update_bits(ds1374->chip->regmap, DS1374_REG_CR,
+ DS1374_REG_CR_WACE | DS1374_REG_CR_AIE |
+ DS1374_REG_CR_WDALM, DS1374_REG_CR_WACE |
+ DS1374_REG_CR_AIE);
+ else
+ regmap_update_bits(ds1374->chip->regmap, DS1374_REG_CR,
+ DS1374_REG_CR_WACE, 0);
out:
mutex_unlock(&ds1374->mutex);
return ret;
}
-#endif
-static const struct rtc_class_ops ds1374_rtc_ops = {
+static const struct rtc_class_ops ds1374_rtc_alm_ops = {
.read_time = ds1374_read_time,
.set_time = ds1374_set_time,
-#ifndef CONFIG_RTC_DRV_DS1374_WDT
.read_alarm = ds1374_read_alarm,
.set_alarm = ds1374_set_alarm,
.alarm_irq_enable = ds1374_alarm_irq_enable,
-#endif
};
-#ifdef CONFIG_RTC_DRV_DS1374_WDT
-/*
- *****************************************************************************
- *
- * Watchdog Driver
- *
- *****************************************************************************
- */
-static struct i2c_client *save_client;
-/* Default margin */
-#define WD_TIMO 131762
-
-#define DRV_NAME "DS1374 Watchdog"
-
-static int wdt_margin = WD_TIMO;
-static unsigned long wdt_is_open;
-module_param(wdt_margin, int, 0);
-MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 32s)");
-
-static const struct watchdog_info ds1374_wdt_info = {
- .identity = "DS1374 WTD",
- .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
-};
-
-static int ds1374_wdt_settimeout(unsigned int timeout)
-{
- int ret = -ENOIOCTLCMD;
- int cr;
-
- ret = cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
- if (ret < 0)
- goto out;
-
- /* Disable any existing watchdog/alarm before setting the new one */
- cr &= ~DS1374_REG_CR_WACE;
-
- ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
- if (ret < 0)
- goto out;
-
- /* Set new watchdog time */
- ret = ds1374_write_rtc(save_client, timeout, DS1374_REG_WDALM0, 3);
- if (ret) {
- pr_info("couldn't set new watchdog time\n");
- goto out;
- }
-
- /* Enable watchdog timer */
- cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM;
- cr &= ~DS1374_REG_CR_AIE;
-
- ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
- if (ret < 0)
- goto out;
-
- return 0;
-out:
- return ret;
-}
-
-
-/*
- * Reload the watchdog timer. (ie, pat the watchdog)
- */
-static void ds1374_wdt_ping(void)
-{
- u32 val;
- int ret = 0;
-
- ret = ds1374_read_rtc(save_client, &val, DS1374_REG_WDALM0, 3);
- if (ret)
- pr_info("WD TICK FAIL!!!!!!!!!! %i\n", ret);
-}
-
-static void ds1374_wdt_disable(void)
-{
- int ret = -ENOIOCTLCMD;
- int cr;
-
- cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
- /* Disable watchdog timer */
- cr &= ~DS1374_REG_CR_WACE;
-
- ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
-}
-
-/*
- * Watchdog device is opened, and watchdog starts running.
- */
-static int ds1374_wdt_open(struct inode *inode, struct file *file)
-{
- struct ds1374 *ds1374 = i2c_get_clientdata(save_client);
-
- if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
- mutex_lock(&ds1374->mutex);
- if (test_and_set_bit(0, &wdt_is_open)) {
- mutex_unlock(&ds1374->mutex);
- return -EBUSY;
- }
- /*
- * Activate
- */
- wdt_is_open = 1;
- mutex_unlock(&ds1374->mutex);
- return nonseekable_open(inode, file);
- }
- return -ENODEV;
-}
-
-/*
- * Close the watchdog device.
- */
-static int ds1374_wdt_release(struct inode *inode, struct file *file)
-{
- if (MINOR(inode->i_rdev) == WATCHDOG_MINOR)
- clear_bit(0, &wdt_is_open);
-
- return 0;
-}
-
-/*
- * Pat the watchdog whenever device is written to.
- */
-static ssize_t ds1374_wdt_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- if (len) {
- ds1374_wdt_ping();
- return 1;
- }
- return 0;
-}
-
-static ssize_t ds1374_wdt_read(struct file *file, char __user *data,
- size_t len, loff_t *ppos)
-{
- return 0;
-}
-
-/*
- * Handle commands from user-space.
- */
-static long ds1374_wdt_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int new_margin, options;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user((struct watchdog_info __user *)arg,
- &ds1374_wdt_info, sizeof(ds1374_wdt_info)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, (int __user *)arg);
- case WDIOC_KEEPALIVE:
- ds1374_wdt_ping();
- return 0;
- case WDIOC_SETTIMEOUT:
- if (get_user(new_margin, (int __user *)arg))
- return -EFAULT;
-
- if (new_margin < 1 || new_margin > 16777216)
- return -EINVAL;
-
- wdt_margin = new_margin;
- ds1374_wdt_settimeout(new_margin);
- ds1374_wdt_ping();
- /* fallthrough */
- case WDIOC_GETTIMEOUT:
- return put_user(wdt_margin, (int __user *)arg);
- case WDIOC_SETOPTIONS:
- if (copy_from_user(&options, (int __user *)arg, sizeof(int)))
- return -EFAULT;
-
- if (options & WDIOS_DISABLECARD) {
- pr_info("disable watchdog\n");
- ds1374_wdt_disable();
- }
-
- if (options & WDIOS_ENABLECARD) {
- pr_info("enable watchdog\n");
- ds1374_wdt_settimeout(wdt_margin);
- ds1374_wdt_ping();
- }
-
- return -EINVAL;
- }
- return -ENOTTY;
-}
-
-static long ds1374_wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret;
- struct ds1374 *ds1374 = i2c_get_clientdata(save_client);
-
- mutex_lock(&ds1374->mutex);
- ret = ds1374_wdt_ioctl(file, cmd, arg);
- mutex_unlock(&ds1374->mutex);
-
- return ret;
-}
-
-static int ds1374_wdt_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- if (code == SYS_DOWN || code == SYS_HALT)
- /* Disable Watchdog */
- ds1374_wdt_disable();
- return NOTIFY_DONE;
-}
-
-static const struct file_operations ds1374_wdt_fops = {
- .owner = THIS_MODULE,
- .read = ds1374_wdt_read,
- .unlocked_ioctl = ds1374_wdt_unlocked_ioctl,
- .write = ds1374_wdt_write,
- .open = ds1374_wdt_open,
- .release = ds1374_wdt_release,
- .llseek = no_llseek,
-};
-
-static struct miscdevice ds1374_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &ds1374_wdt_fops,
-};
-
-static struct notifier_block ds1374_wdt_notifier = {
- .notifier_call = ds1374_wdt_notify_sys,
+static const struct rtc_class_ops ds1374_rtc_ops = {
+ .read_time = ds1374_read_time,
+ .set_time = ds1374_set_time,
};
-#endif /*CONFIG_RTC_DRV_DS1374_WDT*/
-/*
- *****************************************************************************
- *
- * Driver Interface
- *
- *****************************************************************************
- */
-static int ds1374_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ds1374_rtc_probe(struct platform_device *pdev)
{
- struct ds1374 *ds1374;
+ struct device *dev = &pdev->dev;
+ struct ds1374 *ds1374 = dev_get_drvdata(dev->parent);
+ struct ds1374_rtc *ds1374_rtc;
int ret;
- ds1374 = devm_kzalloc(&client->dev, sizeof(struct ds1374), GFP_KERNEL);
- if (!ds1374)
+ ds1374_rtc = devm_kzalloc(dev, sizeof(*ds1374_rtc), GFP_KERNEL);
+ if (!ds1374_rtc)
return -ENOMEM;
+ ds1374_rtc->chip = ds1374;
- ds1374->client = client;
- i2c_set_clientdata(client, ds1374);
+ platform_set_drvdata(pdev, ds1374_rtc);
- INIT_WORK(&ds1374->work, ds1374_work);
- mutex_init(&ds1374->mutex);
+ INIT_WORK(&ds1374_rtc->work, ds1374_work);
+ mutex_init(&ds1374_rtc->mutex);
- ret = ds1374_check_rtc_status(client);
- if (ret)
+ ret = ds1374_check_rtc_status(ds1374_rtc);
+ if (ret) {
+ dev_err(dev, "Failed to check rtc status\n");
return ret;
+ }
- if (client->irq > 0) {
- ret = devm_request_irq(&client->dev, client->irq, ds1374_irq, 0,
- "ds1374", client);
+ /* if the mfd device indicates is configured to run with ALM
+ * try to get the IRQ
+ */
+ if (ds1374->mode == DS1374_MODE_RTC_ALM && ds1374->irq > 0) {
+ ret = devm_request_irq(dev, ds1374->irq,
+ ds1374_irq, 0, "ds1374", ds1374_rtc);
if (ret) {
- dev_err(&client->dev, "unable to request IRQ\n");
+ dev_err(dev, "unable to request IRQ\n");
return ret;
}
- device_set_wakeup_capable(&client->dev, 1);
+ device_set_wakeup_capable(dev, 1);
+ ds1374_rtc->rtc = devm_rtc_device_register(dev,
+ "ds1374-rtc",
+ &ds1374_rtc_alm_ops,
+ THIS_MODULE);
+ } else {
+ ds1374_rtc->rtc = devm_rtc_device_register(dev, "ds1374-rtc",
+ &ds1374_rtc_ops,
+ THIS_MODULE);
}
- ds1374->rtc = devm_rtc_device_register(&client->dev, client->name,
- &ds1374_rtc_ops, THIS_MODULE);
- if (IS_ERR(ds1374->rtc)) {
- dev_err(&client->dev, "unable to register the class device\n");
- return PTR_ERR(ds1374->rtc);
+ if (IS_ERR(ds1374_rtc->rtc)) {
+ dev_err(dev, "unable to register the class device\n");
+ return PTR_ERR(ds1374_rtc->rtc);
}
-
-#ifdef CONFIG_RTC_DRV_DS1374_WDT
- save_client = client;
- ret = misc_register(&ds1374_miscdev);
- if (ret)
- return ret;
- ret = register_reboot_notifier(&ds1374_wdt_notifier);
- if (ret) {
- misc_deregister(&ds1374_miscdev);
- return ret;
- }
- ds1374_wdt_settimeout(131072);
-#endif
-
return 0;
}
-static int ds1374_remove(struct i2c_client *client)
+static int ds1374_rtc_remove(struct platform_device *pdev)
{
- struct ds1374 *ds1374 = i2c_get_clientdata(client);
-#ifdef CONFIG_RTC_DRV_DS1374_WDT
- misc_deregister(&ds1374_miscdev);
- ds1374_miscdev.parent = NULL;
- unregister_reboot_notifier(&ds1374_wdt_notifier);
-#endif
+ struct ds1374_rtc *ds1374_rtc = platform_get_drvdata(pdev);
- if (client->irq > 0) {
- mutex_lock(&ds1374->mutex);
- ds1374->exiting = 1;
- mutex_unlock(&ds1374->mutex);
+ if (ds1374_rtc->chip->irq > 0) {
+ mutex_lock(&ds1374_rtc->mutex);
+ ds1374_rtc->exiting = 1;
+ mutex_unlock(&ds1374_rtc->mutex);
- devm_free_irq(&client->dev, client->irq, client);
- cancel_work_sync(&ds1374->work);
+ devm_free_irq(&pdev->dev, ds1374_rtc->chip->irq,
+ ds1374_rtc);
+ cancel_work_sync(&ds1374_rtc->work);
}
return 0;
}
#ifdef CONFIG_PM_SLEEP
-static int ds1374_suspend(struct device *dev)
+static int ds1374_rtc_suspend(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ds1374_rtc *ds1374_rtc = platform_get_drvdata(pdev);
- if (client->irq > 0 && device_may_wakeup(&client->dev))
- enable_irq_wake(client->irq);
+ if (ds1374_rtc->chip->irq > 0 && device_may_wakeup(&pdev->dev))
+ enable_irq_wake(ds1374_rtc->chip->irq);
return 0;
}
-static int ds1374_resume(struct device *dev)
+static int ds1374_rtc_resume(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ds1374_rtc *ds1374_rtc = platform_get_drvdata(pdev);
- if (client->irq > 0 && device_may_wakeup(&client->dev))
- disable_irq_wake(client->irq);
+ if (ds1374_rtc->chip->irq > 0 && device_may_wakeup(&pdev->dev))
+ disable_irq_wake(ds1374_rtc->chip->irq);
return 0;
}
#endif
-static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume);
+static SIMPLE_DEV_PM_OPS(ds1374_rtc_pm, ds1374_rtc_suspend, ds1374_rtc_resume);
-static struct i2c_driver ds1374_driver = {
+static struct platform_driver ds1374_rtc_driver = {
.driver = {
- .name = "rtc-ds1374",
- .pm = &ds1374_pm,
+ .name = "ds1374-rtc",
+ .pm = &ds1374_rtc_pm,
},
- .probe = ds1374_probe,
- .remove = ds1374_remove,
- .id_table = ds1374_id,
+ .probe = ds1374_rtc_probe,
+ .remove = ds1374_rtc_remove,
};
-
-module_i2c_driver(ds1374_driver);
+module_platform_driver(ds1374_rtc_driver);
MODULE_AUTHOR("Scott Wood <scottwood@xxxxxxxxxxxxx>");
+MODULE_AUTHOR("Moritz Fischer <mdf@xxxxxxxxxx>");
MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ds1374-rtc");
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 52a70ee..1703611 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -120,6 +120,16 @@ config DA9062_WATCHDOG
This driver can be built as a module. The module name is da9062_wdt.
+config DS1374_WATCHDOG
+ tristate "Maxim/Dallas 1374 Watchdog"
+ depends on MFD_DS1374
+ depends on REGMAP_I2C
depends on I2C
select REGMAP_I2C
but doesn't the mfd driver already depend on that ?
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the Maxim/Dallas DS1374 MFD.
+
+ This driver can be built as a module. The module name is ds1374-wdt.
+
config GPIO_WATCHDOG
tristate "Watchdog device controlled through GPIO-line"
depends on OF_GPIO
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index a2126e2..5b3b053 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
obj-$(CONFIG_SUNXI_WATCHDOG) += sunxi_wdt.o
obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
+obj-$(CONFIG_DS1374_WATCHDOG) += ds1374-wdt.o
obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
diff --git a/drivers/watchdog/ds1374-wdt.c b/drivers/watchdog/ds1374-wdt.c
new file mode 100644
index 0000000..d221560
--- /dev/null
+++ b/drivers/watchdog/ds1374-wdt.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (c) 2017, National Instruments Corp.
+ *
+ * Dallas/Maxim DS1374 Watchdog Driver, heavily based on the older
+ * drivers/rtc/rtc-ds1374.c implementation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ds1374.h>
+
alphabetic order, please.
+#define DS1374_WDT_RATE 4096 /* Hz */
+#define DS1374_WDT_MIN_TIMEOUT 1 /* seconds */
+#define DS1374_WDT_DEFAULT_TIMEOUT 30 /* seconds */
+
Please use tabs
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned int timeout;
+module_param(timeout, int, 0444);
+MODULE_PARM_DESC(timeout, "Watchdog timeout");
+
+struct ds1374_wdt {
+ struct ds1374 *chip;
+ struct device *dev;
+ struct watchdog_device wdd;
+};
+
+static int ds1374_wdt_stop(struct watchdog_device *wdog)
+{
+ struct ds1374_wdt *ds1374_wdt = watchdog_get_drvdata(wdog);
+ int err;
+
+ err = regmap_update_bits(ds1374_wdt->chip->regmap, DS1374_REG_CR,
+ DS1374_REG_CR_WACE, 0);
+ if (err)
+ return err;
+
+ if (ds1374_wdt->chip->remapped_reset)
+ return regmap_update_bits(ds1374_wdt->chip->regmap,
+ DS1374_REG_CR, DS1374_REG_CR_WDSTR,
+ 0);
+
+ return 0;
+}
+
+static int ds1374_wdt_ping(struct watchdog_device *wdog)
+{
+ struct ds1374_wdt *ds1374_wdt = watchdog_get_drvdata(wdog);
+ u32 val;
+ int err;
+
+ err = ds1374_read_bulk(ds1374_wdt->chip, &val, DS1374_REG_WDALM0, 3);
Why not just regmap_bulk_read() ?
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int ds1374_wdt_set_timeout(struct watchdog_device *wdog,
+ unsigned int t)
+{
+ struct ds1374_wdt *ds1374_wdt = watchdog_get_drvdata(wdog);
+ struct regmap *regmap = ds1374_wdt->chip->regmap;
+ unsigned int timeout = DS1374_WDT_RATE * t;
+ u8 remapped = ds1374_wdt->chip->remapped_reset
+ ? DS1374_REG_CR_WDSTR : 0;
I personally prefer to split initialization from declaration if the initialization
requires continuation lines.
+ int err;
+
+ err = regmap_update_bits(regmap, DS1374_REG_CR,
+ DS1374_REG_CR_WACE | DS1374_REG_CR_AIE, 0);
+
+ err = ds1374_write_bulk(ds1374_wdt->chip, timeout,
+ DS1374_REG_WDALM0, 3);
Why not just regmap_bulk_write() ?
The mixed use of mfd driver functions and regmap functions is confusing.
I think it would be better to avoid it.
+ if (err) {
+ dev_err(ds1374_wdt->dev, "couldn't set new watchdog time\n");
Is that noise necessary ? Same elsewhere. The error is returned to user space,
which should be sufficient.
+ return err;
+ }
+
+ ds1374_wdt->wdd.timeout = t;
wdog->timeout = t;
+
+ return regmap_update_bits(regmap, DS1374_REG_CR,
+ (DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM |
+ DS1374_REG_CR_AIE | DS1374_REG_CR_WDSTR),
+ (DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM |
+ DS1374_REG_CR_AIE | remapped));
Some unnecessary ( )
+}
+
+static int ds1374_wdt_start(struct watchdog_device *wdog)
+{
+ int err;
+ struct ds1374_wdt *ds1374_wdt = watchdog_get_drvdata(wdog);
+
+ err = ds1374_wdt_set_timeout(wdog, wdog->timeout);
+ if (err) {
+ dev_err(ds1374_wdt->dev, "%s: failed to set timeout (%d) %u\n",
+ __func__, err, wdog->timeout);
+ return err;
+ }
+
+ err = ds1374_wdt_ping(wdog);
+ if (err) {
+ dev_err(ds1374_wdt->dev, "%s: failed to ping (%d)\n", __func__,
+ err);
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct watchdog_info ds1374_wdt_info = {
+ .identity = "DS1374 WTD",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
+ | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops ds1374_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = ds1374_wdt_start,
+ .stop = ds1374_wdt_stop,
+ .set_timeout = ds1374_wdt_set_timeout,
+ .ping = ds1374_wdt_ping,
+};
+
+static int ds1374_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ds1374 *ds1374 = dev_get_drvdata(dev->parent);
+ struct ds1374_wdt *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->chip = ds1374;
+ platform_set_drvdata(pdev, priv);
+
+ priv->wdd.info = &ds1374_wdt_info;
+ priv->wdd.ops = &ds1374_wdt_ops;
+ priv->wdd.min_timeout = DS1374_WDT_MIN_TIMEOUT;
+ priv->wdd.timeout = DS1374_WDT_DEFAULT_TIMEOUT;
+ priv->wdd.max_timeout = 0x1ffffff / DS1374_WDT_RATE;
+ priv->wdd.parent = dev->parent;
+
+ watchdog_init_timeout(&priv->wdd, timeout, dev);
+ watchdog_set_nowayout(&priv->wdd, nowayout);
+ watchdog_stop_on_reboot(&priv->wdd);
+ watchdog_set_drvdata(&priv->wdd, priv);
+
+ err = devm_watchdog_register_device(dev, &priv->wdd);
+ if (err) {
+ dev_err(dev, "Failed to register watchdog device\n");
+ return err;
+ }
+
+ dev_info(dev, "Registered DS1374 Watchdog\n");
+
+ return 0;
+}
+
+static int ds1374_wdt_remove(struct platform_device *pdev)
+{
+ struct ds1374_wdt *priv = platform_get_drvdata(pdev);
+
+ if (!nowayout)
+ ds1374_wdt_stop(&priv->wdd);
+
This may bypass MAGICCLOSE: If the watchdog daemon is killed and the module removed,
the watchdog will be stopped. Is this really what you want ? If so, why set MAGICCLOSE
in the first place ?
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ds1374_wdt_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int ds1374_wdt_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
+
Those functions are quite pointless.
+static SIMPLE_DEV_PM_OPS(ds1374_wdt_pm, ds1374_wdt_suspend, ds1374_wdt_resume);
+
+static struct platform_driver ds1374_wdt_driver = {
+ .probe = ds1374_wdt_probe,
+ .remove = ds1374_wdt_remove,
+ .driver = {
+ .name = "ds1374-wdt",
+ .pm = &ds1374_wdt_pm,
+ },
+};
+module_platform_driver(ds1374_wdt_driver);
+
+MODULE_AUTHOR("Moritz Fischer <mdf@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Maxim/Dallas DS1374 WDT Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ds1374-wdt");
diff --git a/include/dt-bindings/mfd/ds1374.h b/include/dt-bindings/mfd/ds1374.h
new file mode 100644
index 0000000..b33cd5e
--- /dev/null
+++ b/include/dt-bindings/mfd/ds1374.h
@@ -0,0 +1,17 @@
+/*
+ * This header provides macros for Maxim/Dallas DS1374 DT bindings
+ *
+ * Copyright (C) 2017 National Instruments Corp
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#ifndef __DT_BINDINGS_MFD_DS1374_H__
+#define __DT_BINDINGS_MFD_DS1374_H__
+
+#define DALLAS_MODE_RTC 0
+#define DALLAS_MODE_ALM 1
+#define DALLAS_MODE_WDT 2
+
+#endif /* __DT_BINDINGS_MFD_DS1374_H__ */
diff --git a/include/linux/mfd/ds1374.h b/include/linux/mfd/ds1374.h
new file mode 100644
index 0000000..7b697f8
--- /dev/null
+++ b/include/linux/mfd/ds1374.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2017, National Instruments Corp.
+ *
+ * Multi Function Device for Dallas/Maxim DS1374 RTC/WDT
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MFD_DS1374_H
+#define MFD_DS1374_H
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+enum ds1374_mode {
+ DS1374_MODE_RTC_ONLY,
+ DS1374_MODE_RTC_ALM,
+ DS1374_MODE_RTC_WDT,
+};
+
+/* Register definitions to for all subdrivers
+ */
+#define DS1374_REG_TOD0 0x00 /* Time of Day */
+#define DS1374_REG_TOD1 0x01
+#define DS1374_REG_TOD2 0x02
+#define DS1374_REG_TOD3 0x03
+#define DS1374_REG_WDALM0 0x04 /* Watchdog/Alarm */
+#define DS1374_REG_WDALM1 0x05
+#define DS1374_REG_WDALM2 0x06
+#define DS1374_REG_CR 0x07 /* Control */
+#define DS1374_REG_CR_AIE 0x01 /* Alarm Int. Enable */
+#define DS1374_REG_CR_WDSTR 0x08 /* 1=Reset on INT, 0=Rreset on RST */
+#define DS1374_REG_CR_WDALM 0x20 /* 1=Watchdog, 0=Alarm */
+#define DS1374_REG_CR_WACE 0x40 /* WD/Alarm counter enable */
+#define DS1374_REG_SR 0x08 /* Status */
+#define DS1374_REG_SR_OSF 0x80 /* Oscillator Stop Flag */
+#define DS1374_REG_SR_AF 0x01 /* Alarm Flag */
+#define DS1374_REG_TCR 0x09 /* Trickle Charge */
+
+struct ds1374 {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ int irq;
+ enum ds1374_mode mode;
+ bool remapped_reset;
+};
+
+int ds1374_read_bulk(struct ds1374 *ds1374, u32 *time, int reg, int nbytes);
+
+int ds1374_write_bulk(struct ds1374 *ds1374, u32 time, int reg, int nbytes);
+
+#endif /* MFD_DS1374_H */