[PATCH v2 0/5] thermal: imx: Add nvmem-cells binding on imx6sx

[Leonard Crestez]

On imx6sx accessing OCOTP directly is wrong because the ocotp clock needs to be
enabled first. Fix this by adding a nvmem-cells binding and using it on imx6sx,
imx6ul and imx6ull.

The existing binding is kept around because it works fine on imx6qdl.

This was initially reported by Lothar WaÃmann <LW@xxxxxxxxxxxxxxxxxxx> in reply
to a patch adding imx6ul/ull support:

Link: https://lkml.org/lkml/2017/6/9/578

---
Changes since v1:
 * Move nvmem_cell_read_u32 to nvmem core (Shawn Guo, Srinivas Kandagatla)
 * Adjust binding description (Rob Herring)
 * Adjust formatting of thermal info cells (Shawn Guo)
 * Link: https://lkml.org/lkml/2017/7/6/426

Leonard Crestez (5):
  thermal: imx: Add nvmem-cells alternate binding for OCOTP access
  nvmem: core: Add nvmem_cell_read_u32
  thermal: imx: Add support for reading OCOTP through nvmem
  ARM: dts: imx6sx: Use nvmem-cells for tempmon
  ARM: dts: imx6ul: Add imx6ul-tempmon

 .../devicetree/bindings/thermal/imx-thermal.txt    |   7 ++
 arch/arm/boot/dts/imx6sx.dtsi                      |  13 ++-
 arch/arm/boot/dts/imx6ul.dtsi                      |  19 ++++
 drivers/nvmem/core.c                               |  37 ++++++++
 drivers/thermal/imx_thermal.c                      | 103 +++++++++++++++------
 include/linux/nvmem-consumer.h                     |   8 ++
 6 files changed, 156 insertions(+), 31 deletions(-)

-- 
2.7.4