[PATCH 2/5] parport: cleanup prohibited space after functions name
From: Carlos Palminha
Date: Mon Jul 17 2017 - 12:38:12 EST
based on checkpatch, remove prohibited space between function name and
open parenthesis '('.
Signed-off-by: Carlos Palminha <palminha@xxxxxxxxxxxx>
---
drivers/parport/ieee1284.c | 212 ++++++++++++------------
drivers/parport/ieee1284_ops.c | 338 +++++++++++++++++++--------------------
drivers/parport/parport_atari.c | 4 +-
drivers/parport/parport_gsc.c | 62 +++----
drivers/parport/parport_mfc3.c | 2 +-
drivers/parport/parport_serial.c | 52 +++---
drivers/parport/parport_sunbpp.c | 6 +-
drivers/parport/probe.c | 42 ++---
drivers/parport/procfs.c | 22 +--
9 files changed, 370 insertions(+), 370 deletions(-)
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index b40ee76d519d..27673b838e74 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -32,22 +32,22 @@
#endif
#ifdef DEBUG
-#define DPRINTK(stuff...) printk (stuff)
+#define DPRINTK(stuff...) printk(stuff)
#else
#define DPRINTK(stuff...)
#endif
/* Make parport_wait_peripheral wake up.
* It will be useful to call this from an interrupt handler. */
-static void parport_ieee1284_wakeup (struct parport *port)
+static void parport_ieee1284_wakeup(struct parport *port)
{
- up (&port->physport->ieee1284.irq);
+ up(&port->physport->ieee1284.irq);
}
static struct parport *port_from_cookie[PARPORT_MAX];
-static void timeout_waiting_on_port (unsigned long cookie)
+static void timeout_waiting_on_port(unsigned long cookie)
{
- parport_ieee1284_wakeup (port_from_cookie[cookie % PARPORT_MAX]);
+ parport_ieee1284_wakeup(port_from_cookie[cookie % PARPORT_MAX]);
}
/**
@@ -66,7 +66,7 @@ static void timeout_waiting_on_port (unsigned long cookie)
* what it's doing as soon as it can.
*/
-int parport_wait_event (struct parport *port, signed long timeout)
+int parport_wait_event(struct parport *port, signed long timeout)
{
int ret;
struct timer_list timer;
@@ -82,8 +82,8 @@ int parport_wait_event (struct parport *port, signed long timeout)
port_from_cookie[port->number % PARPORT_MAX] = port;
timer.data = port->number;
- add_timer (&timer);
- ret = down_interruptible (&port->physport->ieee1284.irq);
+ add_timer(&timer);
+ ret = down_interruptible(&port->physport->ieee1284.irq);
if (!del_timer_sync(&timer) && !ret)
/* Timed out. */
ret = 1;
@@ -127,15 +127,15 @@ int parport_poll_peripheral(struct parport *port,
int i;
unsigned char status;
for (i = 0; i < count; i++) {
- status = parport_read_status (port);
+ status = parport_read_status(port);
if ((status & mask) == result)
return 0;
- if (signal_pending (current))
+ if (signal_pending(current))
return -EINTR;
if (need_resched())
break;
if (i >= 2)
- udelay (5);
+ udelay(5);
}
return 1;
@@ -187,7 +187,7 @@ int parport_wait_peripheral(struct parport *port,
* How about making a note (in the device structure) of how long
* it takes, so we know for next time?
*/
- ret = parport_poll_peripheral (port, mask, result, usec);
+ ret = parport_poll_peripheral(port, mask, result, usec);
if (ret != 1)
return ret;
@@ -198,16 +198,16 @@ int parport_wait_peripheral(struct parport *port,
/* 40ms of slow polling. */
deadline = jiffies + msecs_to_jiffies(40);
- while (time_before (jiffies, deadline)) {
- if (signal_pending (current))
+ while (time_before(jiffies, deadline)) {
+ if (signal_pending(current))
return -EINTR;
/* Wait for 10ms (or until an interrupt occurs if
* the handler is set) */
- if ((ret = parport_wait_event (port, msecs_to_jiffies(10))) < 0)
+ if ((ret = parport_wait_event(port, msecs_to_jiffies(10))) < 0)
return ret;
- status = parport_read_status (port);
+ status = parport_read_status(port);
if ((status & mask) == result)
return 0;
@@ -224,7 +224,7 @@ int parport_wait_peripheral(struct parport *port,
#ifdef CONFIG_PARPORT_1284
/* Terminate a negotiated mode. */
-static void parport_ieee1284_terminate (struct parport *port)
+static void parport_ieee1284_terminate(struct parport *port)
{
int r;
port = port->physport;
@@ -237,11 +237,11 @@ static void parport_ieee1284_terminate (struct parport *port)
/* Terminate from EPP mode. */
/* Event 68: Set nInit low */
- parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
- udelay (50);
+ parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
+ udelay(50);
/* Event 69: Set nInit high, nSelectIn low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_SELECT
| PARPORT_CONTROL_INIT,
PARPORT_CONTROL_SELECT
@@ -254,22 +254,22 @@ static void parport_ieee1284_terminate (struct parport *port)
/* In ECP we can only terminate from fwd idle phase. */
if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
/* Event 47: Set nInit high */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT
| PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_INIT
| PARPORT_CONTROL_AUTOFD);
/* Event 49: PError goes high */
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r)
- DPRINTK (KERN_INFO "%s: Timeout at event 49\n",
+ DPRINTK(KERN_INFO "%s: Timeout at event 49\n",
port->name);
- parport_data_forward (port);
- DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+ parport_data_forward(port);
+ DPRINTK(KERN_DEBUG "%s: ECP direction: forward\n",
port->name);
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
}
@@ -280,38 +280,38 @@ static void parport_ieee1284_terminate (struct parport *port)
/* Terminate from all other modes. */
/* Event 22: Set nSelectIn low, nAutoFd high */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_SELECT
| PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_SELECT);
/* Event 24: nAck goes low */
- r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+ r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
if (r)
- DPRINTK (KERN_INFO "%s: Timeout at event 24\n",
+ DPRINTK(KERN_INFO "%s: Timeout at event 24\n",
port->name);
/* Event 25: Set nAutoFd low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
/* Event 27: nAck goes high */
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK);
if (r)
- DPRINTK (KERN_INFO "%s: Timeout at event 27\n",
+ DPRINTK(KERN_INFO "%s: Timeout at event 27\n",
port->name);
/* Event 29: Set nAutoFd high */
- parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+ parport_frob_control(port, PARPORT_CONTROL_AUTOFD, 0);
}
port->ieee1284.mode = IEEE1284_MODE_COMPAT;
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
- DPRINTK (KERN_DEBUG "%s: In compatibility (forward idle) mode\n",
+ DPRINTK(KERN_DEBUG "%s: In compatibility (forward idle) mode\n",
port->name);
}
#endif /* IEEE1284 support */
@@ -331,12 +331,12 @@ static void parport_ieee1284_terminate (struct parport *port)
* has rejected the negotiation.
*/
-int parport_negotiate (struct parport *port, int mode)
+int parport_negotiate(struct parport *port, int mode)
{
#ifndef CONFIG_PARPORT_1284
if (mode == IEEE1284_MODE_COMPAT)
return 0;
- printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+ printk(KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
return -1;
#else
int m = mode & ~IEEE1284_ADDR;
@@ -357,7 +357,7 @@ int parport_negotiate (struct parport *port, int mode)
/* Go to compatibility forward idle mode */
if (port->ieee1284.mode != IEEE1284_MODE_COMPAT)
- parport_ieee1284_terminate (port);
+ parport_ieee1284_terminate(port);
if (mode == IEEE1284_MODE_COMPAT)
/* Compatibility mode: no negotiation. */
@@ -381,7 +381,7 @@ int parport_negotiate (struct parport *port, int mode)
port->ieee1284.phase = IEEE1284_PH_NEGOTIATION;
/* Start off with nStrobe and nAutoFd high, and nSelectIn low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE
| PARPORT_CONTROL_AUTOFD
| PARPORT_CONTROL_SELECT,
@@ -389,18 +389,18 @@ int parport_negotiate (struct parport *port, int mode)
udelay(1);
/* Event 0: Set data */
- parport_data_forward (port);
- parport_write_data (port, m);
- udelay (400); /* Shouldn't need to wait this long. */
+ parport_data_forward(port);
+ parport_write_data(port, m);
+ udelay(400); /* Shouldn't need to wait this long. */
/* Event 1: Set nSelectIn high, nAutoFd low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_SELECT
| PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
/* Event 2: PError, Select, nFault go high, nAck goes low */
- if (parport_wait_peripheral (port,
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_ERROR
| PARPORT_STATUS_SELECT
| PARPORT_STATUS_PAPEROUT
@@ -409,102 +409,102 @@ int parport_negotiate (struct parport *port, int mode)
| PARPORT_STATUS_SELECT
| PARPORT_STATUS_PAPEROUT)) {
/* Timeout */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_SELECT
| PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_SELECT);
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: Peripheral not IEEE1284 compliant (0x%02X)\n",
- port->name, parport_read_status (port));
+ port->name, parport_read_status(port));
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
return -1; /* Not IEEE1284 compliant */
}
/* Event 3: Set nStrobe low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_STROBE);
/* Event 4: Set nStrobe and nAutoFd high */
- udelay (5);
- parport_frob_control (port,
+ udelay(5);
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE
| PARPORT_CONTROL_AUTOFD,
0);
/* Event 6: nAck goes high */
- if (parport_wait_peripheral (port,
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK)) {
/* This shouldn't really happen with a compliant device. */
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: Mode 0x%02x not supported? (0x%02x)\n",
- port->name, mode, port->ops->read_status (port));
- parport_ieee1284_terminate (port);
+ port->name, mode, port->ops->read_status(port));
+ parport_ieee1284_terminate(port);
return 1;
}
- xflag = parport_read_status (port) & PARPORT_STATUS_SELECT;
+ xflag = parport_read_status(port) & PARPORT_STATUS_SELECT;
/* xflag should be high for all modes other than nibble (0). */
if (mode && !xflag) {
/* Mode not supported. */
- DPRINTK (KERN_DEBUG "%s: Mode 0x%02x rejected by peripheral\n",
+ DPRINTK(KERN_DEBUG "%s: Mode 0x%02x rejected by peripheral\n",
port->name, mode);
- parport_ieee1284_terminate (port);
+ parport_ieee1284_terminate(port);
return 1;
}
/* More to do if we've requested extensibility link. */
if (mode & IEEE1284_EXT_LINK) {
m = mode & 0x7f;
- udelay (1);
- parport_write_data (port, m);
- udelay (1);
+ udelay(1);
+ parport_write_data(port, m);
+ udelay(1);
/* Event 51: Set nStrobe low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_STROBE);
/* Event 52: nAck goes low */
- if (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
+ if (parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0)) {
/* This peripheral is _very_ slow. */
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: Event 52 didn't happen\n",
port->name);
- parport_ieee1284_terminate (port);
+ parport_ieee1284_terminate(port);
return 1;
}
/* Event 53: Set nStrobe high */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE,
0);
/* Event 55: nAck goes high */
- if (parport_wait_peripheral (port,
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK)) {
/* This shouldn't really happen with a compliant
* device. */
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: Mode 0x%02x not supported? (0x%02x)\n",
port->name, mode,
- port->ops->read_status (port));
- parport_ieee1284_terminate (port);
+ port->ops->read_status(port));
+ parport_ieee1284_terminate(port);
return 1;
}
/* Event 54: Peripheral sets XFlag to reflect support */
- xflag = parport_read_status (port) & PARPORT_STATUS_SELECT;
+ xflag = parport_read_status(port) & PARPORT_STATUS_SELECT;
/* xflag should be high. */
if (!xflag) {
/* Extended mode not supported. */
- DPRINTK (KERN_DEBUG "%s: Extended mode 0x%02x not "
+ DPRINTK(KERN_DEBUG "%s: Extended mode 0x%02x not "
"supported\n", port->name, mode);
- parport_ieee1284_terminate (port);
+ parport_ieee1284_terminate(port);
return 1;
}
@@ -512,7 +512,7 @@ int parport_negotiate (struct parport *port, int mode)
}
/* Mode is supported */
- DPRINTK (KERN_DEBUG "%s: In mode 0x%02x\n", port->name, mode);
+ DPRINTK(KERN_DEBUG "%s: In mode 0x%02x\n", port->name, mode);
port->ieee1284.mode = mode;
/* But ECP is special */
@@ -520,21 +520,21 @@ int parport_negotiate (struct parport *port, int mode)
port->ieee1284.phase = IEEE1284_PH_ECP_SETUP;
/* Event 30: Set nAutoFd low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
/* Event 31: PError goes high. */
- r = parport_wait_peripheral (port,
+ r = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r) {
- DPRINTK (KERN_INFO "%s: Timeout at event 31\n",
+ DPRINTK(KERN_INFO "%s: Timeout at event 31\n",
port->name);
}
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
- DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+ DPRINTK(KERN_DEBUG "%s: ECP direction: forward\n",
port->name);
} else {
switch (mode) {
@@ -558,31 +558,31 @@ int parport_negotiate (struct parport *port, int mode)
* Returns zero if data was available.
*/
#ifdef CONFIG_PARPORT_1284
-static int parport_ieee1284_ack_data_avail (struct parport *port)
+static int parport_ieee1284_ack_data_avail(struct parport *port)
{
- if (parport_read_status (port) & PARPORT_STATUS_ERROR)
+ if (parport_read_status(port) & PARPORT_STATUS_ERROR)
/* Event 18 didn't happen. */
return -1;
/* Event 20: nAutoFd goes high. */
- port->ops->frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+ port->ops->frob_control(port, PARPORT_CONTROL_AUTOFD, 0);
port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
return 0;
}
#endif /* IEEE1284 support */
/* Handle an interrupt. */
-void parport_ieee1284_interrupt (void *handle)
+void parport_ieee1284_interrupt(void *handle)
{
struct parport *port = handle;
- parport_ieee1284_wakeup (port);
+ parport_ieee1284_wakeup(port);
#ifdef CONFIG_PARPORT_1284
if (port->ieee1284.phase == IEEE1284_PH_REV_IDLE) {
/* An interrupt in this phase means that data
* is now available. */
- DPRINTK (KERN_DEBUG "%s: Data available\n", port->name);
- parport_ieee1284_ack_data_avail (port);
+ DPRINTK(KERN_DEBUG "%s: Data available\n", port->name);
+ parport_ieee1284_ack_data_avail(port);
}
#endif /* IEEE1284 support */
}
@@ -605,10 +605,10 @@ void parport_ieee1284_interrupt (void *handle)
* or positive), or else an error code.
*/
-ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
+ssize_t parport_write(struct parport *port, const void *buffer, size_t len)
{
#ifndef CONFIG_PARPORT_1284
- return port->ops->compat_write_data (port, buffer, len, 0);
+ return port->ops->compat_write_data(port, buffer, len, 0);
#else
ssize_t retval;
int mode = port->ieee1284.mode;
@@ -622,15 +622,15 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
switch (mode) {
case IEEE1284_MODE_NIBBLE:
case IEEE1284_MODE_BYTE:
- parport_negotiate (port, IEEE1284_MODE_COMPAT);
+ parport_negotiate(port, IEEE1284_MODE_COMPAT);
case IEEE1284_MODE_COMPAT:
- DPRINTK (KERN_DEBUG "%s: Using compatibility mode\n",
+ DPRINTK(KERN_DEBUG "%s: Using compatibility mode\n",
port->name);
fn = port->ops->compat_write_data;
break;
case IEEE1284_MODE_EPP:
- DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: Using EPP mode\n", port->name);
if (addr) {
fn = port->ops->epp_write_addr;
} else {
@@ -638,7 +638,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
}
break;
case IEEE1284_MODE_EPPSWE:
- DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
+ DPRINTK(KERN_DEBUG "%s: Using software-emulated EPP mode\n",
port->name);
if (addr) {
fn = parport_ieee1284_epp_write_addr;
@@ -648,7 +648,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
break;
case IEEE1284_MODE_ECP:
case IEEE1284_MODE_ECPRLE:
- DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: Using ECP mode\n", port->name);
if (addr) {
fn = port->ops->ecp_write_addr;
} else {
@@ -657,7 +657,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
break;
case IEEE1284_MODE_ECPSWE:
- DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
+ DPRINTK(KERN_DEBUG "%s: Using software-emulated ECP mode\n",
port->name);
/* The caller has specified that it must be emulated,
* even if we have ECP hardware! */
@@ -669,13 +669,13 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
break;
default:
- DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
+ DPRINTK(KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
port->ieee1284.mode);
return -ENOSYS;
}
retval = (*fn) (port, buffer, len, 0);
- DPRINTK (KERN_DEBUG "%s: wrote %d/%d bytes\n", port->name, retval, len);
+ DPRINTK(KERN_DEBUG "%s: wrote %d/%d bytes\n", port->name, retval, len);
return retval;
#endif /* IEEE1284 support */
}
@@ -698,10 +698,10 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
* or positive), or else an error code.
*/
-ssize_t parport_read (struct parport *port, void *buffer, size_t len)
+ssize_t parport_read(struct parport *port, void *buffer, size_t len)
{
#ifndef CONFIG_PARPORT_1284
- printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+ printk(KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
return -ENODEV;
#else
int mode = port->physport->ieee1284.mode;
@@ -720,28 +720,28 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
* end up needlessly calling negotiate(BYTE) repeately.. (fb)
*/
if ((port->physport->modes & PARPORT_MODE_TRISTATE) &&
- !parport_negotiate (port, IEEE1284_MODE_BYTE)) {
+ !parport_negotiate(port, IEEE1284_MODE_BYTE)) {
/* got into BYTE mode OK */
- DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: Using byte mode\n", port->name);
fn = port->ops->byte_read_data;
break;
}
- if (parport_negotiate (port, IEEE1284_MODE_NIBBLE)) {
+ if (parport_negotiate(port, IEEE1284_MODE_NIBBLE)) {
return -EIO;
}
/* fall through to NIBBLE */
case IEEE1284_MODE_NIBBLE:
- DPRINTK (KERN_DEBUG "%s: Using nibble mode\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: Using nibble mode\n", port->name);
fn = port->ops->nibble_read_data;
break;
case IEEE1284_MODE_BYTE:
- DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: Using byte mode\n", port->name);
fn = port->ops->byte_read_data;
break;
case IEEE1284_MODE_EPP:
- DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: Using EPP mode\n", port->name);
if (addr) {
fn = port->ops->epp_read_addr;
} else {
@@ -749,7 +749,7 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
}
break;
case IEEE1284_MODE_EPPSWE:
- DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
+ DPRINTK(KERN_DEBUG "%s: Using software-emulated EPP mode\n",
port->name);
if (addr) {
fn = parport_ieee1284_epp_read_addr;
@@ -759,18 +759,18 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
break;
case IEEE1284_MODE_ECP:
case IEEE1284_MODE_ECPRLE:
- DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: Using ECP mode\n", port->name);
fn = port->ops->ecp_read_data;
break;
case IEEE1284_MODE_ECPSWE:
- DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
+ DPRINTK(KERN_DEBUG "%s: Using software-emulated ECP mode\n",
port->name);
fn = parport_ieee1284_ecp_read_data;
break;
default:
- DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
+ DPRINTK(KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
port->physport->ieee1284.mode);
return -ENOSYS;
}
@@ -795,14 +795,14 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
* up.
*/
-long parport_set_timeout (struct pardevice *dev, long inactivity)
+long parport_set_timeout(struct pardevice *dev, long inactivity)
{
long int old = dev->timeout;
dev->timeout = inactivity;
if (dev->port->physport->cad == dev)
- parport_ieee1284_wakeup (dev->port);
+ parport_ieee1284_wakeup(dev->port);
return old;
}
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
index bfc9cde9a21d..b431ab6349fe 100644
--- a/drivers/parport/ieee1284_ops.c
+++ b/drivers/parport/ieee1284_ops.c
@@ -27,7 +27,7 @@
#endif
#ifdef DEBUG
-#define DPRINTK(stuff...) printk (stuff)
+#define DPRINTK(stuff...) printk(stuff)
#else
#define DPRINTK(stuff...)
#endif
@@ -37,7 +37,7 @@
* ***/
/* Compatibility mode. */
-size_t parport_ieee1284_write_compat (struct parport *port,
+size_t parport_ieee1284_write_compat(struct parport *port,
const void *buffer, size_t len,
int flags)
{
@@ -50,13 +50,13 @@ size_t parport_ieee1284_write_compat (struct parport *port,
| PARPORT_CONTROL_INIT);
if (port->irq != PARPORT_IRQ_NONE) {
- parport_enable_irq (port);
+ parport_enable_irq(port);
no_irq = 0;
}
port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
- parport_write_control (port, ctl);
- parport_data_forward (port);
+ parport_write_control(port, ctl);
+ parport_data_forward(port);
while (count < len) {
unsigned long expire = jiffies + dev->timeout;
long wait = msecs_to_jiffies(10);
@@ -68,12 +68,12 @@ size_t parport_ieee1284_write_compat (struct parport *port,
/* Wait until the peripheral's ready */
do {
/* Is the peripheral ready yet? */
- if (!parport_wait_peripheral (port, mask, val))
+ if (!parport_wait_peripheral(port, mask, val))
/* Skip the loop */
goto ready;
/* Is the peripheral upset? */
- if ((parport_read_status (port) &
+ if ((parport_read_status(port) &
(PARPORT_STATUS_PAPEROUT |
PARPORT_STATUS_SELECT |
PARPORT_STATUS_ERROR))
@@ -87,7 +87,7 @@ size_t parport_ieee1284_write_compat (struct parport *port,
goto stop;
/* Have we run out of time? */
- if (!time_before (jiffies, expire))
+ if (!time_before(jiffies, expire))
break;
/* Yield the port for a while. If this is the
@@ -95,49 +95,49 @@ size_t parport_ieee1284_write_compat (struct parport *port,
the port. This way, we find out if we have
our interrupt handler called. */
if (count && no_irq) {
- parport_release (dev);
+ parport_release(dev);
schedule_timeout_interruptible(wait);
- parport_claim_or_block (dev);
+ parport_claim_or_block(dev);
}
else
/* We must have the device claimed here */
- parport_wait_event (port, wait);
+ parport_wait_event(port, wait);
/* Is there a signal pending? */
- if (signal_pending (current))
+ if (signal_pending(current))
break;
/* Wait longer next time. */
wait *= 2;
- } while (time_before (jiffies, expire));
+ } while (time_before(jiffies, expire));
- if (signal_pending (current))
+ if (signal_pending(current))
break;
- DPRINTK (KERN_DEBUG "%s: Timed out\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: Timed out\n", port->name);
break;
ready:
/* Write the character to the data lines. */
byte = *addr++;
- parport_write_data (port, byte);
- udelay (1);
+ parport_write_data(port, byte);
+ udelay(1);
/* Pulse strobe. */
- parport_write_control (port, ctl | PARPORT_CONTROL_STROBE);
- udelay (1); /* strobe */
+ parport_write_control(port, ctl | PARPORT_CONTROL_STROBE);
+ udelay(1); /* strobe */
- parport_write_control (port, ctl);
- udelay (1); /* hold */
+ parport_write_control(port, ctl);
+ udelay(1); /* hold */
/* Assume the peripheral received it. */
count++;
/* Let another process run if it needs to. */
- if (time_before (jiffies, expire))
- if (!parport_yield_blocking (dev)
+ if (time_before(jiffies, expire))
+ if (!parport_yield_blocking(dev)
&& need_resched())
- schedule ();
+ schedule();
}
stop:
port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
@@ -146,7 +146,7 @@ size_t parport_ieee1284_write_compat (struct parport *port,
}
/* Nibble mode. */
-size_t parport_ieee1284_read_nibble (struct parport *port,
+size_t parport_ieee1284_read_nibble(struct parport *port,
void *buffer, size_t len,
int flags)
{
@@ -168,39 +168,39 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
}
/* Event 7: Set nAutoFd low. */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
/* Event 9: nAck goes low. */
port->ieee1284.phase = IEEE1284_PH_REV_DATA;
- if (parport_wait_peripheral (port,
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_ACK, 0)) {
/* Timeout -- no more data? */
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: Nibble timeout at event 9 (%d bytes)\n",
port->name, i/2);
- parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+ parport_frob_control(port, PARPORT_CONTROL_AUTOFD, 0);
break;
}
/* Read a nibble. */
- nibble = parport_read_status (port) >> 3;
+ nibble = parport_read_status(port) >> 3;
nibble &= ~8;
if ((nibble & 0x10) == 0)
nibble |= 8;
nibble &= 0xf;
/* Event 10: Set nAutoFd high. */
- parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+ parport_frob_control(port, PARPORT_CONTROL_AUTOFD, 0);
/* Event 11: nAck goes high. */
- if (parport_wait_peripheral (port,
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK)) {
/* Timeout -- no more data? */
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: Nibble timeout at event 11\n",
port->name);
break;
@@ -216,14 +216,14 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
if (i == len) {
/* Read the last nibble without checking data avail. */
- if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ if (parport_read_status(port) & PARPORT_STATUS_ERROR) {
end_of_data:
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: No more nibble data (%d bytes)\n",
port->name, i/2);
/* Go to reverse idle phase. */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
@@ -237,7 +237,7 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
}
/* Byte mode. */
-size_t parport_ieee1284_read_byte (struct parport *port,
+size_t parport_ieee1284_read_byte(struct parport *port,
void *buffer, size_t len,
int flags)
{
@@ -251,67 +251,67 @@ size_t parport_ieee1284_read_byte (struct parport *port,
unsigned char byte;
/* Data available? */
- if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ if (parport_read_status(port) & PARPORT_STATUS_ERROR) {
goto end_of_data;
}
/* Event 14: Place data bus in high impedance state. */
- parport_data_reverse (port);
+ parport_data_reverse(port);
/* Event 7: Set nAutoFd low. */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
/* Event 9: nAck goes low. */
port->physport->ieee1284.phase = IEEE1284_PH_REV_DATA;
- if (parport_wait_peripheral (port,
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_ACK,
0)) {
/* Timeout -- no more data? */
- parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
+ parport_frob_control(port, PARPORT_CONTROL_AUTOFD,
0);
- DPRINTK (KERN_DEBUG "%s: Byte timeout at event 9\n",
+ DPRINTK(KERN_DEBUG "%s: Byte timeout at event 9\n",
port->name);
break;
}
- byte = parport_read_data (port);
+ byte = parport_read_data(port);
*buf++ = byte;
/* Event 10: Set nAutoFd high */
- parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+ parport_frob_control(port, PARPORT_CONTROL_AUTOFD, 0);
/* Event 11: nAck goes high. */
- if (parport_wait_peripheral (port,
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK)) {
/* Timeout -- no more data? */
- DPRINTK (KERN_DEBUG "%s: Byte timeout at event 11\n",
+ DPRINTK(KERN_DEBUG "%s: Byte timeout at event 11\n",
port->name);
break;
}
/* Event 16: Set nStrobe low. */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_STROBE);
- udelay (5);
+ udelay(5);
/* Event 17: Set nStrobe high. */
- parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+ parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
}
if (count == len) {
/* Read the last byte without checking data avail. */
- if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ if (parport_read_status(port) & PARPORT_STATUS_ERROR) {
end_of_data:
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: No more byte data (%zd bytes)\n",
port->name, count);
/* Go to reverse idle phase. */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
@@ -331,32 +331,32 @@ size_t parport_ieee1284_read_byte (struct parport *port,
#ifdef CONFIG_PARPORT_1284
static inline
-int ecp_forward_to_reverse (struct parport *port)
+int ecp_forward_to_reverse(struct parport *port)
{
int retval;
/* Event 38: Set nAutoFd low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
- parport_data_reverse (port);
- udelay (5);
+ parport_data_reverse(port);
+ udelay(5);
/* Event 39: Set nInit low to initiate bus reversal */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT,
0);
/* Event 40: PError goes low */
- retval = parport_wait_peripheral (port,
+ retval = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT, 0);
if (!retval) {
- DPRINTK (KERN_DEBUG "%s: ECP direction: reverse\n",
+ DPRINTK(KERN_DEBUG "%s: ECP direction: reverse\n",
port->name);
port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
} else {
- DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n",
+ DPRINTK(KERN_DEBUG "%s: ECP direction: failed to reverse\n",
port->name);
port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
}
@@ -365,29 +365,29 @@ int ecp_forward_to_reverse (struct parport *port)
}
static inline
-int ecp_reverse_to_forward (struct parport *port)
+int ecp_reverse_to_forward(struct parport *port)
{
int retval;
/* Event 47: Set nInit high */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_INIT
| PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_INIT
| PARPORT_CONTROL_AUTOFD);
/* Event 49: PError goes high */
- retval = parport_wait_peripheral (port,
+ retval = parport_wait_peripheral(port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (!retval) {
- parport_data_forward (port);
- DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+ parport_data_forward(port);
+ DPRINTK(KERN_DEBUG "%s: ECP direction: forward\n",
port->name);
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
} else {
- DPRINTK (KERN_DEBUG
+ DPRINTK(KERN_DEBUG
"%s: ECP direction: failed to switch forward\n",
port->name);
port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
@@ -400,7 +400,7 @@ int ecp_reverse_to_forward (struct parport *port)
#endif /* IEEE1284 support */
/* ECP mode, forward channel, data. */
-size_t parport_ieee1284_ecp_write_data (struct parport *port,
+size_t parport_ieee1284_ecp_write_data(struct parport *port,
const void *buffer, size_t len,
int flags)
{
@@ -414,13 +414,13 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
port = port->physport;
if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE)
- if (ecp_reverse_to_forward (port))
+ if (ecp_reverse_to_forward(port))
return 0;
port->ieee1284.phase = IEEE1284_PH_FWD_DATA;
/* HostAck high (data, not command) */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD
| PARPORT_CONTROL_STROBE
| PARPORT_CONTROL_INIT,
@@ -431,17 +431,17 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
byte = *buf;
try_again:
- parport_write_data (port, byte);
- parport_frob_control (port, PARPORT_CONTROL_STROBE,
+ parport_write_data(port, byte);
+ parport_frob_control(port, PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_STROBE);
- udelay (5);
+ udelay(5);
for (retry = 0; retry < 100; retry++) {
- if (!parport_wait_peripheral (port,
+ if (!parport_wait_peripheral(port,
PARPORT_STATUS_BUSY, 0))
goto success;
- if (signal_pending (current)) {
- parport_frob_control (port,
+ if (signal_pending(current)) {
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE,
0);
break;
@@ -449,33 +449,33 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
}
/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
- DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
- parport_frob_control (port, PARPORT_CONTROL_INIT,
+ parport_frob_control(port, PARPORT_CONTROL_INIT,
PARPORT_CONTROL_INIT);
- udelay (50);
- if (parport_read_status (port) & PARPORT_STATUS_PAPEROUT) {
+ udelay(50);
+ if (parport_read_status(port) & PARPORT_STATUS_PAPEROUT) {
/* It's buggered. */
- parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+ parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
break;
}
- parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
- udelay (50);
- if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
+ parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
+ udelay(50);
+ if (!(parport_read_status(port) & PARPORT_STATUS_PAPEROUT))
break;
- DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
+ DPRINTK(KERN_DEBUG "%s: Host transfer recovered\n",
port->name);
- if (time_after_eq (jiffies, expire))
+ if (time_after_eq(jiffies, expire))
break;
goto try_again;
success:
- parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
- udelay (5);
- if (parport_wait_peripheral (port,
+ parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+ udelay(5);
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY))
/* Peripheral hasn't accepted the data. */
@@ -489,7 +489,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
}
/* ECP mode, reverse channel, data. */
-size_t parport_ieee1284_ecp_read_data (struct parport *port,
+size_t parport_ieee1284_ecp_read_data(struct parport *port,
void *buffer, size_t len, int flags)
{
#ifndef CONFIG_PARPORT_1284
@@ -505,16 +505,16 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
port = port->physport;
if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE)
- if (ecp_forward_to_reverse (port))
+ if (ecp_forward_to_reverse(port))
return 0;
port->ieee1284.phase = IEEE1284_PH_REV_DATA;
/* Set HostAck low to start accepting data. */
- ctl = parport_read_control (port);
+ ctl = parport_read_control(port);
ctl &= ~(PARPORT_CONTROL_STROBE | PARPORT_CONTROL_INIT |
PARPORT_CONTROL_AUTOFD);
- parport_write_control (port,
+ parport_write_control(port,
ctl | PARPORT_CONTROL_AUTOFD);
while (count < len) {
unsigned long expire = jiffies + dev->timeout;
@@ -523,7 +523,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
/* Event 43: Peripheral sets nAck low. It can take as
long as it wants. */
- while (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
+ while (parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0)) {
/* The peripheral hasn't given us data in
35ms. If we have data to give back to the
caller, do it now. */
@@ -532,21 +532,21 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
/* If we've used up all the time we were allowed,
give up altogether. */
- if (!time_before (jiffies, expire))
+ if (!time_before(jiffies, expire))
goto out;
/* Yield the port for a while. */
if (count && dev->port->irq != PARPORT_IRQ_NONE) {
- parport_release (dev);
+ parport_release(dev);
schedule_timeout_interruptible(msecs_to_jiffies(40));
- parport_claim_or_block (dev);
+ parport_claim_or_block(dev);
}
else
/* We must have the device claimed here. */
- parport_wait_event (port, msecs_to_jiffies(40));
+ parport_wait_event(port, msecs_to_jiffies(40));
/* Is there a signal pending? */
- if (signal_pending (current))
+ if (signal_pending(current))
goto out;
}
@@ -556,23 +556,23 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
this can't be as well. */
command = 0;
else
- command = (parport_read_status (port) &
+ command = (parport_read_status(port) &
PARPORT_STATUS_BUSY) ? 1 : 0;
/* Read the data. */
- byte = parport_read_data (port);
+ byte = parport_read_data(port);
/* If this is a channel command, rather than an RLE
command or a normal data byte, don't accept it. */
if (command) {
if (byte & 0x80) {
- DPRINTK (KERN_DEBUG "%s: stopping short at "
+ DPRINTK(KERN_DEBUG "%s: stopping short at "
"channel command (%02x)\n",
port->name, byte);
goto out;
}
else if (port->ieee1284.mode != IEEE1284_MODE_ECPRLE)
- DPRINTK (KERN_DEBUG "%s: device illegally "
+ DPRINTK(KERN_DEBUG "%s: device illegally "
"using RLE; accepting anyway\n",
port->name);
@@ -580,7 +580,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
/* Are we allowed to read that many bytes? */
if (rle_count > (len - count)) {
- DPRINTK (KERN_DEBUG "%s: leaving %d RLE bytes "
+ DPRINTK(KERN_DEBUG "%s: leaving %d RLE bytes "
"for next time\n", port->name,
rle_count);
break;
@@ -590,17 +590,17 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
}
/* Event 44: Set HostAck high, acknowledging handshake. */
- parport_write_control (port, ctl);
+ parport_write_control(port, ctl);
/* Event 45: The peripheral has 35ms to set nAck high. */
- if (parport_wait_peripheral (port, PARPORT_STATUS_ACK,
+ if (parport_wait_peripheral(port, PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK)) {
/* It's gone wrong. Return what data we have
to the caller. */
- DPRINTK (KERN_DEBUG "ECP read timed out at 45\n");
+ DPRINTK(KERN_DEBUG "ECP read timed out at 45\n");
if (command)
- printk (KERN_WARNING
+ printk(KERN_WARNING
"%s: command ignored (%02x)\n",
port->name, byte);
@@ -608,7 +608,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
}
/* Event 46: Set HostAck low and accept the data. */
- parport_write_control (port,
+ parport_write_control(port,
ctl | PARPORT_CONTROL_AUTOFD);
/* If we just read a run-length count, fetch the data. */
@@ -618,10 +618,10 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
/* If this is the byte after a run-length count, decompress. */
if (rle) {
rle = 0;
- memset (buf, byte, rle_count);
+ memset(buf, byte, rle_count);
buf += rle_count;
count += rle_count;
- DPRINTK (KERN_DEBUG "%s: decompressed to %d bytes\n",
+ DPRINTK(KERN_DEBUG "%s: decompressed to %d bytes\n",
port->name, rle_count);
} else {
/* Normal data byte. */
@@ -637,7 +637,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
}
/* ECP mode, forward channel, commands. */
-size_t parport_ieee1284_ecp_write_addr (struct parport *port,
+size_t parport_ieee1284_ecp_write_addr(struct parport *port,
const void *buffer, size_t len,
int flags)
{
@@ -651,13 +651,13 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
port = port->physport;
if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE)
- if (ecp_reverse_to_forward (port))
+ if (ecp_reverse_to_forward(port))
return 0;
port->ieee1284.phase = IEEE1284_PH_FWD_DATA;
/* HostAck low (command, not data) */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD
| PARPORT_CONTROL_STROBE
| PARPORT_CONTROL_INIT,
@@ -669,17 +669,17 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
byte = *buf;
try_again:
- parport_write_data (port, byte);
- parport_frob_control (port, PARPORT_CONTROL_STROBE,
+ parport_write_data(port, byte);
+ parport_frob_control(port, PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_STROBE);
- udelay (5);
+ udelay(5);
for (retry = 0; retry < 100; retry++) {
- if (!parport_wait_peripheral (port,
+ if (!parport_wait_peripheral(port,
PARPORT_STATUS_BUSY, 0))
goto success;
- if (signal_pending (current)) {
- parport_frob_control (port,
+ if (signal_pending(current)) {
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE,
0);
break;
@@ -687,33 +687,33 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
}
/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
- DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+ DPRINTK(KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
- parport_frob_control (port, PARPORT_CONTROL_INIT,
+ parport_frob_control(port, PARPORT_CONTROL_INIT,
PARPORT_CONTROL_INIT);
- udelay (50);
- if (parport_read_status (port) & PARPORT_STATUS_PAPEROUT) {
+ udelay(50);
+ if (parport_read_status(port) & PARPORT_STATUS_PAPEROUT) {
/* It's buggered. */
- parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+ parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
break;
}
- parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
- udelay (50);
- if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
+ parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
+ udelay(50);
+ if (!(parport_read_status(port) & PARPORT_STATUS_PAPEROUT))
break;
- DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
+ DPRINTK(KERN_DEBUG "%s: Host transfer recovered\n",
port->name);
- if (time_after_eq (jiffies, expire))
+ if (time_after_eq(jiffies, expire))
break;
goto try_again;
success:
- parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
- udelay (5);
- if (parport_wait_peripheral (port,
+ parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+ udelay(5);
+ if (parport_wait_peripheral(port,
PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY))
/* Peripheral hasn't accepted the data. */
@@ -731,7 +731,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
* ***/
/* EPP mode, forward channel, data. */
-size_t parport_ieee1284_epp_write_data (struct parport *port,
+size_t parport_ieee1284_epp_write_data(struct parport *port,
const void *buffer, size_t len,
int flags)
{
@@ -739,29 +739,29 @@ size_t parport_ieee1284_epp_write_data (struct parport *port,
size_t ret = 0;
/* set EPP idle state (just to make sure) with strobe low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_AUTOFD |
PARPORT_CONTROL_SELECT |
PARPORT_CONTROL_INIT,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_INIT);
- port->ops->data_forward (port);
+ port->ops->data_forward(port);
for (; len > 0; len--, bp++) {
/* Event 62: Write data and set autofd low */
- parport_write_data (port, *bp);
- parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
+ parport_write_data(port, *bp);
+ parport_frob_control(port, PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
/* Event 58: wait for busy (nWait) to go high */
- if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 0, 10))
+ if (parport_poll_peripheral(port, PARPORT_STATUS_BUSY, 0, 10))
break;
/* Event 63: set nAutoFd (nDStrb) high */
- parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+ parport_frob_control(port, PARPORT_CONTROL_AUTOFD, 0);
/* Event 60: wait for busy (nWait) to go low */
- if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+ if (parport_poll_peripheral(port, PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY, 5))
break;
@@ -769,13 +769,13 @@ size_t parport_ieee1284_epp_write_data (struct parport *port,
}
/* Event 61: set strobe (nWrite) high */
- parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+ parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
return ret;
}
/* EPP mode, reverse channel, data. */
-size_t parport_ieee1284_epp_read_data (struct parport *port,
+size_t parport_ieee1284_epp_read_data(struct parport *port,
void *buffer, size_t len,
int flags)
{
@@ -783,43 +783,43 @@ size_t parport_ieee1284_epp_read_data (struct parport *port,
unsigned ret = 0;
/* set EPP idle state (just to make sure) with strobe high */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_AUTOFD |
PARPORT_CONTROL_SELECT |
PARPORT_CONTROL_INIT,
PARPORT_CONTROL_INIT);
- port->ops->data_reverse (port);
+ port->ops->data_reverse(port);
for (; len > 0; len--, bp++) {
/* Event 67: set nAutoFd (nDStrb) low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
/* Event 58: wait for Busy to go high */
- if (parport_wait_peripheral (port, PARPORT_STATUS_BUSY, 0)) {
+ if (parport_wait_peripheral(port, PARPORT_STATUS_BUSY, 0)) {
break;
}
- *bp = parport_read_data (port);
+ *bp = parport_read_data(port);
/* Event 63: set nAutoFd (nDStrb) high */
- parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+ parport_frob_control(port, PARPORT_CONTROL_AUTOFD, 0);
/* Event 60: wait for Busy to go low */
- if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+ if (parport_poll_peripheral(port, PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY, 5)) {
break;
}
ret++;
}
- port->ops->data_forward (port);
+ port->ops->data_forward(port);
return ret;
}
/* EPP mode, forward channel, addresses. */
-size_t parport_ieee1284_epp_write_addr (struct parport *port,
+size_t parport_ieee1284_epp_write_addr(struct parport *port,
const void *buffer, size_t len,
int flags)
{
@@ -827,29 +827,29 @@ size_t parport_ieee1284_epp_write_addr (struct parport *port,
size_t ret = 0;
/* set EPP idle state (just to make sure) with strobe low */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_AUTOFD |
PARPORT_CONTROL_SELECT |
PARPORT_CONTROL_INIT,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_INIT);
- port->ops->data_forward (port);
+ port->ops->data_forward(port);
for (; len > 0; len--, bp++) {
/* Event 56: Write data and set nAStrb low. */
- parport_write_data (port, *bp);
- parport_frob_control (port, PARPORT_CONTROL_SELECT,
+ parport_write_data(port, *bp);
+ parport_frob_control(port, PARPORT_CONTROL_SELECT,
PARPORT_CONTROL_SELECT);
/* Event 58: wait for busy (nWait) to go high */
- if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 0, 10))
+ if (parport_poll_peripheral(port, PARPORT_STATUS_BUSY, 0, 10))
break;
/* Event 59: set nAStrb high */
- parport_frob_control (port, PARPORT_CONTROL_SELECT, 0);
+ parport_frob_control(port, PARPORT_CONTROL_SELECT, 0);
/* Event 60: wait for busy (nWait) to go low */
- if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+ if (parport_poll_peripheral(port, PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY, 5))
break;
@@ -857,13 +857,13 @@ size_t parport_ieee1284_epp_write_addr (struct parport *port,
}
/* Event 61: set strobe (nWrite) high */
- parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+ parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
return ret;
}
/* EPP mode, reverse channel, addresses. */
-size_t parport_ieee1284_epp_read_addr (struct parport *port,
+size_t parport_ieee1284_epp_read_addr(struct parport *port,
void *buffer, size_t len,
int flags)
{
@@ -871,37 +871,37 @@ size_t parport_ieee1284_epp_read_addr (struct parport *port,
unsigned ret = 0;
/* Set EPP idle state (just to make sure) with strobe high */
- parport_frob_control (port,
+ parport_frob_control(port,
PARPORT_CONTROL_STROBE |
PARPORT_CONTROL_AUTOFD |
PARPORT_CONTROL_SELECT |
PARPORT_CONTROL_INIT,
PARPORT_CONTROL_INIT);
- port->ops->data_reverse (port);
+ port->ops->data_reverse(port);
for (; len > 0; len--, bp++) {
/* Event 64: set nSelectIn (nAStrb) low */
- parport_frob_control (port, PARPORT_CONTROL_SELECT,
+ parport_frob_control(port, PARPORT_CONTROL_SELECT,
PARPORT_CONTROL_SELECT);
/* Event 58: wait for Busy to go high */
- if (parport_wait_peripheral (port, PARPORT_STATUS_BUSY, 0)) {
+ if (parport_wait_peripheral(port, PARPORT_STATUS_BUSY, 0)) {
break;
}
- *bp = parport_read_data (port);
+ *bp = parport_read_data(port);
/* Event 59: set nSelectIn (nAStrb) high */
- parport_frob_control (port, PARPORT_CONTROL_SELECT,
+ parport_frob_control(port, PARPORT_CONTROL_SELECT,
0);
/* Event 60: wait for Busy to go low */
- if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+ if (parport_poll_peripheral(port, PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY, 5))
break;
ret++;
}
- port->ops->data_forward (port);
+ port->ops->data_forward(port);
return ret;
}
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index a81cd2a2747f..b8da1b5f550c 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -194,13 +194,13 @@ static int __init parport_atari_init(void)
return -ENODEV;
if (request_irq(IRQ_MFP_BUSY, parport_irq_handler, 0, p->name,
p)) {
- parport_put_port (p);
+ parport_put_port(p);
return -ENODEV;
}
this_port = p;
printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name);
- parport_announce_port (p);
+ parport_announce_port(p);
return 0;
}
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index fc1c4192121b..626df53d6d9d 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -65,8 +65,8 @@ static int clear_epp_timeout(struct parport *pb)
/* To clear timeout some chips require double read */
parport_gsc_read_status(pb);
r = parport_gsc_read_status(pb);
- parport_writeb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
- parport_writeb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+ parport_writeb(r | 0x01, STATUS(pb)); /* Some reset by writing 1 */
+ parport_writeb(r & 0xfe, STATUS(pb)); /* Others by writing 0 */
r = parport_gsc_read_status(pb);
return !(r & 0x01);
@@ -87,12 +87,12 @@ void parport_gsc_init_state(struct pardevice *dev, struct parport_state *s)
void parport_gsc_save_state(struct parport *p, struct parport_state *s)
{
- s->u.pc.ctr = parport_readb (CONTROL (p));
+ s->u.pc.ctr = parport_readb(CONTROL(p));
}
void parport_gsc_restore_state(struct parport *p, struct parport_state *s)
{
- parport_writeb (s->u.pc.ctr, CONTROL (p));
+ parport_writeb(s->u.pc.ctr, CONTROL(p));
}
struct parport_operations parport_gsc_ops =
@@ -151,19 +151,19 @@ static int parport_SPP_supported(struct parport *pb)
/* Do a simple read-write test to make sure the port exists. */
w = 0xc;
- parport_writeb (w, CONTROL (pb));
+ parport_writeb(w, CONTROL(pb));
/* Is there a control register that we can read from? Some
* ports don't allow reads, so read_control just returns a
* software copy. Some ports _do_ allow reads, so bypass the
* software copy here. In addition, some bits aren't
* writable. */
- r = parport_readb (CONTROL (pb));
+ r = parport_readb(CONTROL(pb));
if ((r & 0xf) == w) {
w = 0xe;
- parport_writeb (w, CONTROL (pb));
- r = parport_readb (CONTROL (pb));
- parport_writeb (0xc, CONTROL (pb));
+ parport_writeb(w, CONTROL(pb));
+ r = parport_readb(CONTROL(pb));
+ parport_writeb(0xc, CONTROL(pb));
if ((r & 0xf) == w)
return PARPORT_MODE_PCSPP;
}
@@ -171,12 +171,12 @@ static int parport_SPP_supported(struct parport *pb)
/* Try the data register. The data lines aren't tri-stated at
* this stage, so we expect back what we wrote. */
w = 0xaa;
- parport_gsc_write_data (pb, w);
- r = parport_gsc_read_data (pb);
+ parport_gsc_write_data(pb, w);
+ r = parport_gsc_read_data(pb);
if (r == w) {
w = 0x55;
- parport_gsc_write_data (pb, w);
- r = parport_gsc_read_data (pb);
+ parport_gsc_write_data(pb, w);
+ r = parport_gsc_read_data(pb);
if (r == w)
return PARPORT_MODE_PCSPP;
}
@@ -208,7 +208,7 @@ static int parport_PS2_supported(struct parport *pb)
clear_epp_timeout(pb);
/* try to tri-state the buffer */
- parport_gsc_data_reverse (pb);
+ parport_gsc_data_reverse(pb);
parport_gsc_write_data(pb, 0x55);
if (parport_gsc_read_data(pb) != 0x55)
@@ -219,7 +219,7 @@ static int parport_PS2_supported(struct parport *pb)
ok++;
/* cancel input mode */
- parport_gsc_data_forward (pb);
+ parport_gsc_data_forward(pb);
if (ok) {
pb->modes |= PARPORT_MODE_TRISTATE;
@@ -243,17 +243,17 @@ struct parport *parport_gsc_probe_port(unsigned long base,
struct parport tmp;
struct parport *p = &tmp;
- priv = kzalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
+ priv = kzalloc(sizeof(struct parport_gsc_private), GFP_KERNEL);
if (!priv) {
- printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
+ printk(KERN_DEBUG "parport (0x%lx): no memory!\n", base);
return NULL;
}
ops = kmemdup(&parport_gsc_ops, sizeof(struct parport_operations),
GFP_KERNEL);
if (!ops) {
- printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
+ printk(KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
base);
- kfree (priv);
+ kfree(priv);
return NULL;
}
priv->ctr = 0xc;
@@ -268,18 +268,18 @@ struct parport *parport_gsc_probe_port(unsigned long base,
p->ops = ops;
p->private_data = priv;
p->physport = p;
- if (!parport_SPP_supported (p)) {
+ if (!parport_SPP_supported(p)) {
/* No port. */
- kfree (priv);
+ kfree(priv);
kfree(ops);
return NULL;
}
- parport_PS2_supported (p);
+ parport_PS2_supported(p);
if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
PARPORT_DMA_NONE, ops))) {
- kfree (priv);
- kfree (ops);
+ kfree(priv);
+ kfree(ops);
return NULL;
}
@@ -320,9 +320,9 @@ struct parport *parport_gsc_probe_port(unsigned long base,
pr_cont("]\n");
if (p->irq != PARPORT_IRQ_NONE) {
- if (request_irq (p->irq, parport_irq_handler,
+ if (request_irq(p->irq, parport_irq_handler,
0, p->name, p)) {
- printk (KERN_WARNING "%s: irq %d in use, "
+ printk(KERN_WARNING "%s: irq %d in use, "
"resorting to polled operation\n",
p->name, p->irq);
p->irq = PARPORT_IRQ_NONE;
@@ -333,12 +333,12 @@ struct parport *parport_gsc_probe_port(unsigned long base,
/* Done probing. Now put the port into a sensible start-up state. */
parport_gsc_write_data(p, 0);
- parport_gsc_data_forward (p);
+ parport_gsc_data_forward(p);
/* Now that we've told the sharing engine about the port, and
found out its characteristics, let the high-level drivers
know about it. */
- parport_announce_port (p);
+ parport_announce_port(p);
return p;
}
@@ -368,7 +368,7 @@ static int parport_init_chip(struct parisc_device *dev)
/* Initialize bidirectional-mode (0x10) & data-tranfer-mode #1 (0x20) */
printk("%s: initialize bidirectional-mode.\n", __func__);
- parport_writeb ( (0x10 + 0x20), port + 4);
+ parport_writeb((0x10 + 0x20), port + 4);
} else {
printk("%s: enhanced parport-modes not supported.\n", __func__);
@@ -398,9 +398,9 @@ static int parport_remove_chip(struct parisc_device *dev)
pci_free_consistent(priv->dev, PAGE_SIZE,
priv->dma_buf,
priv->dma_handle);
- kfree (p->private_data);
+ kfree(p->private_data);
parport_put_port(p);
- kfree (ops); /* hope no-one cached it */
+ kfree(ops); /* hope no-one cached it */
}
return 0;
}
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 2f650f68af14..d650b00ce38a 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -328,7 +328,7 @@ static int __init parport_mfc3_init(void)
/* XXX: set operating mode */
p->private_data = (void *)piabase;
- parport_announce_port (p);
+ parport_announce_port(p);
if (pias >= MAX_MFC)
break;
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index e15b4845f7c6..1d955f5e8da3 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -522,7 +522,7 @@ struct parport_serial_private {
/* Register the serial port(s) of a PCI card. */
static int serial_register(struct pci_dev *dev, const struct pci_device_id *id)
{
- struct parport_serial_private *priv = pci_get_drvdata (dev);
+ struct parport_serial_private *priv = pci_get_drvdata(dev);
struct pciserial_board *board;
struct serial_private *serial;
@@ -544,13 +544,13 @@ static int serial_register(struct pci_dev *dev, const struct pci_device_id *id)
static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
{
struct parport_pc_pci *card;
- struct parport_serial_private *priv = pci_get_drvdata (dev);
+ struct parport_serial_private *priv = pci_get_drvdata(dev);
int n, success = 0;
priv->par = cards[id->driver_data];
card = &priv->par;
if (card->preinit_hook &&
- card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
+ card->preinit_hook(dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
return -ENODEV;
for (n = 0; n < card->numports; n++) {
@@ -560,18 +560,18 @@ static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
unsigned long io_lo, io_hi;
int irq;
- if (priv->num_par == ARRAY_SIZE (priv->port)) {
- printk (KERN_WARNING
+ if (priv->num_par == ARRAY_SIZE(priv->port)) {
+ printk(KERN_WARNING
"parport_serial: %s: only %zu parallel ports "
- "supported (%d reported)\n", pci_name (dev),
+ "supported (%d reported)\n", pci_name(dev),
ARRAY_SIZE(priv->port), card->numports);
break;
}
- io_lo = pci_resource_start (dev, lo);
+ io_lo = pci_resource_start(dev, lo);
io_hi = 0;
if ((hi >= 0) && (hi <= 6))
- io_hi = pci_resource_start (dev, hi);
+ io_hi = pci_resource_start(dev, hi);
else if (hi > 6)
io_lo += hi; /* Reinterpret the meaning of
"hi" as an offset (see SYBA
@@ -588,7 +588,7 @@ static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
"PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
io_lo, io_hi, irq);
}
- port = parport_pc_probe_port (io_lo, io_hi, irq,
+ port = parport_pc_probe_port(io_lo, io_hi, irq,
PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
if (port) {
priv->port[priv->num_par++] = port;
@@ -597,7 +597,7 @@ static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
}
if (card->postinit_hook)
- card->postinit_hook (dev, card, !success);
+ card->postinit_hook(dev, card, !success);
return 0;
}
@@ -608,27 +608,27 @@ static int parport_serial_pci_probe(struct pci_dev *dev,
struct parport_serial_private *priv;
int err;
- priv = kzalloc (sizeof *priv, GFP_KERNEL);
+ priv = kzalloc(sizeof *priv, GFP_KERNEL);
if (!priv)
return -ENOMEM;
- pci_set_drvdata (dev, priv);
+ pci_set_drvdata(dev, priv);
- err = pci_enable_device (dev);
+ err = pci_enable_device(dev);
if (err) {
- kfree (priv);
+ kfree(priv);
return err;
}
- if (parport_register (dev, id)) {
- kfree (priv);
+ if (parport_register(dev, id)) {
+ kfree(priv);
return -ENODEV;
}
- if (serial_register (dev, id)) {
+ if (serial_register(dev, id)) {
int i;
for (i = 0; i < priv->num_par; i++)
- parport_pc_unregister_port (priv->port[i]);
- kfree (priv);
+ parport_pc_unregister_port(priv->port[i]);
+ kfree(priv);
return -ENODEV;
}
@@ -637,7 +637,7 @@ static int parport_serial_pci_probe(struct pci_dev *dev,
static void parport_serial_pci_remove(struct pci_dev *dev)
{
- struct parport_serial_private *priv = pci_get_drvdata (dev);
+ struct parport_serial_private *priv = pci_get_drvdata(dev);
int i;
// Serial ports
@@ -646,9 +646,9 @@ static void parport_serial_pci_remove(struct pci_dev *dev)
// Parallel ports
for (i = 0; i < priv->num_par; i++)
- parport_pc_unregister_port (priv->port[i]);
+ parport_pc_unregister_port(priv->port[i]);
- kfree (priv);
+ kfree(priv);
return;
}
@@ -706,14 +706,14 @@ static struct pci_driver parport_serial_pci_driver = {
};
-static int __init parport_serial_init (void)
+static int __init parport_serial_init(void)
{
- return pci_register_driver (&parport_serial_pci_driver);
+ return pci_register_driver(&parport_serial_pci_driver);
}
-static void __exit parport_serial_exit (void)
+static void __exit parport_serial_exit(void)
{
- pci_unregister_driver (&parport_serial_pci_driver);
+ pci_unregister_driver(&parport_serial_pci_driver);
return;
}
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index 01cf1c1a841a..c87bf4ac2006 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -184,7 +184,7 @@ static void parport_sunbpp_write_control(struct parport *p, unsigned char d)
PARPORT_CONTROL_INIT |
PARPORT_CONTROL_SELECT);
- parport_sunbpp_frob_control (p, wm, d & wm);
+ parport_sunbpp_frob_control(p, wm, d & wm);
}
static unsigned char parport_sunbpp_read_status(struct parport *p)
@@ -192,7 +192,7 @@ static unsigned char parport_sunbpp_read_status(struct parport *p)
return status_sunbpp_to_pc(p);
}
-static void parport_sunbpp_data_forward (struct parport *p)
+static void parport_sunbpp_data_forward(struct parport *p)
{
struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
unsigned char value_tcr = sbus_readb(®s->p_tcr);
@@ -202,7 +202,7 @@ static void parport_sunbpp_data_forward (struct parport *p)
sbus_writeb(value_tcr, ®s->p_tcr);
}
-static void parport_sunbpp_data_reverse (struct parport *p)
+static void parport_sunbpp_data_reverse(struct parport *p)
{
struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
u8 val = sbus_readb(®s->p_tcr);
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
index f2618cc1c793..8a6b8a36fe36 100644
--- a/drivers/parport/probe.c
+++ b/drivers/parport/probe.c
@@ -40,9 +40,9 @@ static void pretty_print(struct parport *port, int device)
printk(KERN_INFO "%s", port->name);
if (device >= 0)
- printk (" (addr %d)", device);
+ printk(" (addr %d)", device);
- printk (": %s", classes[info->class].descr);
+ printk(": %s", classes[info->class].descr);
if (info->class)
printk(", %s %s", info->mfr, info->model);
@@ -72,7 +72,7 @@ static void parse_data(struct parport *port, int device, char *str)
char *u;
*(sep++) = 0;
/* Get rid of trailing blanks */
- u = sep + strlen (sep) - 1;
+ u = sep + strlen(sep) - 1;
while (u >= p && *u == ' ')
*u-- = '\0';
u = p;
@@ -134,7 +134,7 @@ static void parse_data(struct parport *port, int device, char *str)
/* Read up to count-1 bytes of device id. Terminate buffer with
* '\0'. Buffer begins with two Device ID length bytes as given by
* device. */
-static ssize_t parport_read_device_id (struct parport *port, char *buffer,
+static ssize_t parport_read_device_id(struct parport *port, char *buffer,
size_t count)
{
unsigned char length[2];
@@ -146,7 +146,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
size_t len;
/* First two bytes are MSB,LSB of inclusive length. */
- retval = parport_read (port, length, 2);
+ retval = parport_read(port, length, 2);
if (retval < 0)
return retval;
@@ -178,7 +178,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
* just return constant nibble forever. This catches
* also those cases. */
if (idlens[0] == 0 || idlens[0] > 0xFFF) {
- printk (KERN_DEBUG "%s: reported broken Device ID"
+ printk(KERN_DEBUG "%s: reported broken Device ID"
" length of %#zX bytes\n",
port->name, idlens[0]);
return -EIO;
@@ -194,7 +194,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
if (idlen+1 >= count)
break;
- retval = parport_read (port, buffer+len, idlen-len);
+ retval = parport_read(port, buffer+len, idlen-len);
if (retval < 0)
return retval;
@@ -202,7 +202,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
if (belen != len) {
- printk (KERN_DEBUG "%s: Device ID was %zd bytes"
+ printk(KERN_DEBUG "%s: Device ID was %zd bytes"
" while device told it would be %d"
" bytes\n",
port->name, len, belen);
@@ -215,7 +215,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
* the first 256 bytes or so that we must have read so
* far. */
if (buffer[len-1] == ';') {
- printk (KERN_DEBUG "%s: Device ID reading stopped"
+ printk(KERN_DEBUG "%s: Device ID reading stopped"
" before device told data not available. "
"Current idlen %u of %u, len bytes %02X %02X\n",
port->name, current_idlen, numidlens,
@@ -227,7 +227,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
/* Buffer not large enough, read to end of buffer. */
size_t idlen, len2;
if (len+1 < count) {
- retval = parport_read (port, buffer+len, count-len-1);
+ retval = parport_read(port, buffer+len, count-len-1);
if (retval < 0)
return retval;
len += retval;
@@ -239,7 +239,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
len2 = len;
while(len2 < idlen && retval > 0) {
char tmp[4];
- retval = parport_read (port, tmp,
+ retval = parport_read(port, tmp,
min(sizeof tmp, idlen-len2));
if (retval < 0)
return retval;
@@ -255,30 +255,30 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
}
/* Get Std 1284 Device ID. */
-ssize_t parport_device_id (int devnum, char *buffer, size_t count)
+ssize_t parport_device_id(int devnum, char *buffer, size_t count)
{
ssize_t retval = -ENXIO;
- struct pardevice *dev = parport_open (devnum, "Device ID probe");
+ struct pardevice *dev = parport_open(devnum, "Device ID probe");
if (!dev)
return -ENXIO;
- parport_claim_or_block (dev);
+ parport_claim_or_block(dev);
/* Negotiate to compatibility mode, and then to device ID
* mode. (This so that we start form beginning of device ID if
* already in device ID mode.) */
- parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
- retval = parport_negotiate (dev->port,
+ parport_negotiate(dev->port, IEEE1284_MODE_COMPAT);
+ retval = parport_negotiate(dev->port,
IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID);
if (!retval) {
- retval = parport_read_device_id (dev->port, buffer, count);
- parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
+ retval = parport_read_device_id(dev->port, buffer, count);
+ parport_negotiate(dev->port, IEEE1284_MODE_COMPAT);
if (retval > 2)
- parse_data (dev->port, dev->daisy, buffer+2);
+ parse_data(dev->port, dev->daisy, buffer+2);
}
- parport_release (dev);
- parport_close (dev);
+ parport_release(dev);
+ parport_close(dev);
return retval;
}
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index 8ee44a104ac4..6ee97b5849c5 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -86,19 +86,19 @@ static int do_autoprobe(struct ctl_table *table, int write,
}
if ((str = info->class_name) != NULL)
- len += sprintf (buffer + len, "CLASS:%s;\n", str);
+ len += sprintf(buffer + len, "CLASS:%s;\n", str);
if ((str = info->model) != NULL)
- len += sprintf (buffer + len, "MODEL:%s;\n", str);
+ len += sprintf(buffer + len, "MODEL:%s;\n", str);
if ((str = info->mfr) != NULL)
- len += sprintf (buffer + len, "MANUFACTURER:%s;\n", str);
+ len += sprintf(buffer + len, "MANUFACTURER:%s;\n", str);
if ((str = info->description) != NULL)
- len += sprintf (buffer + len, "DESCRIPTION:%s;\n", str);
+ len += sprintf(buffer + len, "DESCRIPTION:%s;\n", str);
if ((str = info->cmdset) != NULL)
- len += sprintf (buffer + len, "COMMAND SET:%s;\n", str);
+ len += sprintf(buffer + len, "COMMAND SET:%s;\n", str);
if (len > *lenp)
len = *lenp;
@@ -107,7 +107,7 @@ static int do_autoprobe(struct ctl_table *table, int write,
*ppos += len;
- return copy_to_user (result, buffer, len) ? -EFAULT : 0;
+ return copy_to_user(result, buffer, len) ? -EFAULT : 0;
}
#endif /* IEEE1284.3 support. */
@@ -127,7 +127,7 @@ static int do_hardware_base_addr(struct ctl_table *table, int write,
if (write) /* permissions prevent this anyway */
return -EACCES;
- len += sprintf (buffer, "%lu\t%lu\n", port->base, port->base_hi);
+ len += sprintf(buffer, "%lu\t%lu\n", port->base, port->base_hi);
if (len > *lenp)
len = *lenp;
@@ -155,7 +155,7 @@ static int do_hardware_irq(struct ctl_table *table, int write,
if (write) /* permissions prevent this anyway */
return -EACCES;
- len += sprintf (buffer, "%d\n", port->irq);
+ len += sprintf(buffer, "%d\n", port->irq);
if (len > *lenp)
len = *lenp;
@@ -183,7 +183,7 @@ static int do_hardware_dma(struct ctl_table *table, int write,
if (write) /* permissions prevent this anyway */
return -EACCES;
- len += sprintf (buffer, "%d\n", port->dma);
+ len += sprintf(buffer, "%d\n", port->dma);
if (len > *lenp)
len = *lenp;
@@ -606,12 +606,12 @@ int parport_device_proc_unregister(struct pardevice *device)
return 0;
}
-static int __init parport_default_proc_register (void)
+static int __init parport_default_proc_register(void)
{
return parport_bus_init();
}
-static void __exit parport_default_proc_unregister (void)
+static void __exit parport_default_proc_unregister(void)
{
parport_bus_exit();
}
--
2.11.0