Re: [PATCH] HID: Add quirk for Lenovo Yoga 910 with ITE Chips

[Srinivas Pandruvada]

On Sat, 2017-07-15 at 22:05 +0200, Patrick wrote:
> On Sat, Jul 15, 2017 at 07:58:10PM +0200, Bastien Nocera wrote:
> > 
> > On Sat, 2017-07-15 at 19:52 +0200, Patrick Pedersen wrote:
> > > 
> > > On Sat, Jul 15, 2017 at 4:29 PM, Bastien Nocera <hadess@xxxxxxxxx
> > > t>
> > > wrote:
> > > > 
> > > > On Sat, 2017-07-15 at 14:27 +0200, Patrick Pedersen wrote:
> > > > > 
> > > > > As with previous generations of this device (see https://patc
> > > > > hwor
> > > > k.ke
> > > > > 
> > > > > rnel.org/patch/7887361/), the ITE
> > > > > HID Sensor Hub, responsible for the accelerometer and als
> > > > > sensor,
> > > > > requires a quirk entry.
> > > > > 
> > > > > Without the entry, the Sensor Hub can't be accessed and the
> > > > kernel
> > > > > 
> > > > > fails to report any movements. As a result
> > > > > iio-sensor-proxy receives no new data.
> > > > > 
> > > > > It shall additionally be noted that the i2c-hid 'sleep' bug
> > > > (present
> > > > > 
> > > > > since kernel ver. 4.3)
> > > > > still affects the driver. This means that the sensor hub will
> > > > > not
> > > > > report any movement, until
> > > > > the device is suspended and resumed.
Can you try some tests for this for test? I want to see if sensors are
powered off or transport didn't wake up? So forcing the sensors to keep
power on.

diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 16ade0a..a70df7e 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -110,6 +110,9 @@ static int _hid_sensor_power_state(struct
hid_sensor_common *st, bool state)
ÂÂÂÂÂÂÂÂint report_val;
ÂÂÂÂÂÂÂÂs32 poll_value = 0;
Â
+ÂÂÂÂÂÂÂst->power_state.logical_minimum = 1;
+ÂÂÂÂÂÂÂst->report_state.logical_minimum = 1;
+
ÂÂÂÂÂÂÂÂif (state) {
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂif (!atomic_read(&st->user_requested_state))
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂreturn 0;
@@ -146,6 +149,9 @@ static int _hid_sensor_power_state(struct
hid_sensor_common *st, bool state)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂHID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS
_ENUM);
ÂÂÂÂÂÂÂÂ}
Â
+ÂÂÂÂÂÂÂstate_val = 0;
+ÂÂÂÂÂÂÂreport_val = 0;
+ÂÂÂÂÂÂÂ
ÂÂÂÂÂÂÂÂif (state_val >= 0) {
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂstate_val += st->power_state.logical_minimum;
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂsensor_hub_set_feature(st->hsdev, st-
>power_state.report_id,





> > > > > 
> > > > > Signed-off-by: Patrick Pedersen <ctx.xda@xxxxxxxxx>
> > > > > ---
> > > > > Âdrivers/hid/hid-ids.hÂÂÂÂÂÂÂÂ| 1 +
> > > > > Âdrivers/hid/hid-sensor-hub.c | 3 +++
> > > > > Â2 files changed, 4 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> > > > > index 4f9a3938189a..b427a0bcfbe8 100644
> > > > > --- a/drivers/hid/hid-ids.h
> > > > > +++ b/drivers/hid/hid-ids.h
> > > > > @@ -565,6 +565,7 @@
> > > > > Â#define USB_DEVICE_ID_ITE_LENOVO_YOGAÂÂÂ0x8386
> > > > > Â#define USB_DEVICE_ID_ITE_LENOVO_YOGA2ÂÂ0x8350
> > > > > Â#define USB_DEVICE_ID_ITE_LENOVO_YOGA900ÂÂÂÂÂ0x8396
> > > > > +#define USB_DEVICE_ID_ITE_LENOVO_YOGA910ÂÂÂÂÂ0x8186
> > > > > 
> > > > > Â#define USB_VENDOR_ID_JABRAÂÂÂÂÂÂÂÂÂÂ0x0b0e
> > > > > Â#define USB_DEVICE_ID_JABRA_SPEAK_410ÂÂÂÂÂÂÂÂ0x0412
> > > > > diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-
> > > > sensor-
> > > > > 
> > > > > hub.c
> > > > > index 4ef73374a8f9..85b8425483bd 100644
> > > > > --- a/drivers/hid/hid-sensor-hub.c
> > > > > +++ b/drivers/hid/hid-sensor-hub.c
> > > > > @@ -820,6 +820,9 @@ static const struct hid_device_id
> > > > > sensor_hub_devices[] = {
> > > > > ÂÂÂÂÂÂ{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB,
> > > > > USB_VENDOR_ID_ITE,
> > > > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂUSB_DEVICE_ID_ITE_LENOVO_YOGA900),
> > > > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ.driver_data =
> > > > > HID_SENSOR_HUB_ENUM_QUIRK},
> > > > > +ÂÂÂÂÂ{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB,
> > > > > USB_VENDOR_ID_ITE,
> > > > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂUSB_DEVICE_ID_ITE_LENOVO_YOGA910),
> > > > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ.driver_data =
> > > > > HID_SENSOR_HUB_ENUM_QUIRK},
> > > > > ÂÂÂÂÂÂ{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB,
> > > > > USB_VENDOR_ID_INTEL_0,
> > > > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ0x22D8),
> > > > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ.driver_data =
> > > > > HID_SENSOR_HUB_ENUM_QUIRK},
> > > > At this point, wouldn't it make sense to apply the quirk to
> > > > *all*
> > > > ITE
> > > > devices in Lenovo Yoga laptops?
> > > I'm not sure If I got your suggestion right.
> > > 
> > > Those laptops do not share the same ITE chip. ITE is simplyÂ
> > > the vendor/manufacturer of the hid sensor hub. All three definedÂ
> > > yoga laptops use a different ITE sensor hub model.
> > > 
> > > To make this clear, my device, theÂ
> > > Lenovo Yoga 910 uses a ITE8186,Â
> > > where the Yoga 900 uses a ITE8396,Â
> > > the Yoga 2 a ITE8350 and so on
> > > 
> > > Now what "could" me done, is to detect and set the quirk
> > > automatically.Â
> > > This should be doable, as the Hardware PID corresponds to theÂ
> > > model number of the Sensor Hub (ex. ITE8186 = PID 0x8186)
> > I'm saying that if the vendor of the device is USB_VENDOR_ID_ITE
> > and
> > the manufacturer of the hardware is Lenovo in the DMI information,
> > and
> > the model of hardware contains "Yoga", that
> > HID_SENSOR_HUB_ENUM_QUIRK
> > be applied automatically, instead of adding quirks one-by-one.
> First of all, I would like to appologise that my previous reply was
> not caught by the mailing list. I had a frustrating time getting
> mutt to work and decided to use the gmail web interface. Turns out
> that was a bad idea. Fortunately it seems like I got things rightÂ
> this time.
> 
> Now to the automated ITE chip detection you've proposed. I likely
> lack
> the driver and kernel knowledge to implement a feature of such. In
> theÂ
> upcoming days I will to do some research on the HID drivers and see
> whatÂ
> I can do. The goal of this patch was to simply fix the issue for my
> device,
> not to find a new or different solution.
> 
> Patrick