[PATCH v2 0/8] Add support for IPQ8074 PCIe phy and controller
From: Varadarajan Narayanan
Date: Wed Jul 19 2017 - 04:44:05 EST
v2:
dt-bindings: phy: qmp: Add output-clock-names
Added Rob H's Ack
dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
Removed example
Added IPQ8074 specific details
phy: qcom-qmp: Fix phy pipe clock name
Added Vivek's Ack
phy: qcom-qmp: Handle unavailable registers
No changes
phy: qcom-qmp: Add support for IPQ8074
No changes
PCI: dwc: qcom: Use block IP version for operations
Added new patch to use block IP version instead of v1, v2...
dt-bindings: pci: qcom: Add support for IPQ8074
Removed example
Added IPQ8074 specific details
PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
Incorporated Bjorn's feedback:-
- Removed reset names, helper function to assert/deassert, helper
function to R/M/W register.
- Renamed sys_noc clock as iface clock
- Added deinit if phy power on fails
v1:
Add definitions required to enable QMP phy support for IPQ8074.
Add support for the IPQ8074 PCIe controller. IPQ8074 supports
Gen 1/2, one lane, two PCIe root complex with support for MSI and
legacy interrupts, and it conforms to PCI Express Base 2.1
specification.
Varadarajan Narayanan (8):
dt-bindings: phy: qmp: Add output-clock-names
dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
phy: qcom-qmp: Fix phy pipe clock name
phy: qcom-qmp: Handle unavailable registers
phy: qcom-qmp: Add support for IPQ8074
PCI: dwc: qcom: Use block IP version for operations
dt-bindings: pci: qcom: Add support for IPQ8074
PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
.../devicetree/bindings/pci/qcom,pcie.txt | 23 ++
.../devicetree/bindings/phy/qcom-qmp-phy.txt | 11 +
drivers/pci/dwc/pcie-qcom.c | 369 +++++++++++++++++----
drivers/phy/qualcomm/phy-qcom-qmp.c | 186 +++++++++--
4 files changed, 506 insertions(+), 83 deletions(-)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation