[PATCH 0/4] can: Add new binding to limit bit rate used

From: Franklin S Cooper Jr
Date: Wed Jul 19 2017 - 19:38:49 EST


Add a new generic binding that CAN drivers can use to specify the max
arbitration and data bit rate supported by a transceiver. This is
useful since in some instances the maximum speeds may be limited by
the transceiver used. However, transceivers may not provide a means
to determine this limitation at runtime. Therefore, create a new binding
that mimics "fixed-link" that allows a user to hardcode the max speeds
that can be used.

Also add support for this new binding in the MCAN driver.

Note this is an optional subnode so even if a driver adds support for
parsing fixed-transceiver the user does not have to define it in their
device tree.

Franklin S Cooper Jr (4):
can: dev: Add support for limiting configured bitrate
can: fixed-transceiver: Add documentation for CAN fixed transceiver
bindings
can: m_can: Update documentation to mention new fixed transceiver
binding
can: m_can: Add call to of_transceiver_is_fixed

.../bindings/net/can/fixed-transceiver.txt | 31 ++++++++++++++
.../devicetree/bindings/net/can/m_can.txt | 10 +++++
drivers/net/can/dev.c | 48 ++++++++++++++++++++++
drivers/net/can/m_can/m_can.c | 2 +
include/linux/can/dev.h | 5 +++
5 files changed, 96 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/can/fixed-transceiver.txt

--
2.10.0