Re: [PATCH 2/4] can: fixed-transceiver: Add documentation for CAN fixed transceiver bindings

[Sergei Shtylyov]

Hello!

On 7/20/2017 2:36 AM, Franklin S Cooper Jr wrote:

> Add documentation to describe usage of the new fixed transceiver binding.
> This new binding is applicable for any CAN device therefore it exist as

   Exists.

> its own document.
>
> Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx>
> ---
>   .../bindings/net/can/fixed-transceiver.txt         | 31 ++++++++++++++++++++++
>   1 file changed, 31 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/can/fixed-transceiver.txt
>
> diff --git a/Documentation/devicetree/bindings/net/can/fixed-transceiver.txt b/Documentation/devicetree/bindings/net/can/fixed-transceiver.txt
> new file mode 100644
> index 0000000..7c093c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/fixed-transceiver.txt
> @@ -0,0 +1,31 @@
> +Fixed transceiver Device Tree binding
> +------------------------------
> +
> +CAN transceiver typically limits the max speed in standard CAN and CAN FD
> +modes. Typically these limitations are static and the transceivers themselves
> +provide no way to detect this limitation at runtime. For this situation,
> +the "fixed-transceiver" node can be used.
> +
> +Properties:
> +
> +Optional:
> + max-arbitration-speed: a positive value non 0 value that determines the max

   Too many values. :-)

> +			 speed CAN can run in non CAN-FD mode or during the
> +			 arbitration phase in CAN-FD mode.
> +
> + max-data-speed:	 a positive value that determines the max data rate
> +			 that can be used in CAN-FD mode. A value of 0
> +			 implies CAN-FD is not supported by the transceiver.
[...]

MBR, Sergei