Re: [PATCH v2 04/10] mmc: sunxi: Support controllers that can use both old and new timings

From: Maxime Ripard
Date: Fri Jul 21 2017 - 03:20:54 EST


On Thu, Jul 20, 2017 at 11:44:46AM +0800, Chen-Yu Tsai wrote:
> On the SoCs that introduced the new timing mode for MMC controllers,
> both the old (where the clock delays are set in the CCU) and new
> (where the clock delays are set in the MMC controller) timing modes
> are available, and we have to support them both. However there are
> two bits that control which mode is active. One is in the CCU, the
> other is in the MMC controller. The settings on both sides must be
> the same, or nothing will work.
>
> The sunxi-ng clock driver provides an API to query and set the
> active timing mode. At probe time, we try to set the active mode
> to the "new timing mode". If it succeeds, we can then use the MMC
> controller in the new mode. If not, we fall back to the old mode.
>
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>

Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>

Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature