[PATCH v4 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie

[Enric Balletbo i Serra]

The minnie devices comes with an AUO B101EAN01 panel which is different
from default veyron devices, thus the power on/off timing sequence is
slightly different. The datasheet specifies a pwm delay of 200 ms, so
update the PMW delay proprieties accordingly.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---
Heiko,
 I'm not able to test this patch in a minnie device because I don't have
one, so could you do a quick try, please?

Changes since v3:
 - Use new -ms names for proprieties.
 - Fix the delay, should be 200ms instead of 20ms (Pavel)
Changes since v2:
 - Use new names for proprieties.
Changes since v1:
 - Add this new patch as minnie has differents timings

 arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 544de60..4c5307e6 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -123,6 +123,8 @@
 			240 241 242 243 244 245 246 247
 			248 249 250 251 252 253 254 255>;
 	power-supply = <&backlight_regulator>;
+	post-pwm-on-delay-ms = <200>;
+	pwm-off-delay-ms = <200>;
 };
 
 &emmc {
-- 
2.9.3