[PATCH v1 4/6] phy: qcom-qusb2: Add support for runtime PM
From: Manu Gautam
Date: Fri Jul 21 2017 - 07:02:55 EST
Driver can turn off clocks during runtime suspend.
Also, runtime suspend is not as a result of host mode
selective suspend then PHY can be powered off as well.
Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index fa60a99..b505681 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -132,6 +132,9 @@ struct qusb2_phy {
const struct qusb2_phy_cfg *cfg;
bool has_se_clk_scheme;
+ bool phy_initialized;
+ bool powered_on;
+ enum phy_mode mode;
};
static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val)
@@ -203,30 +206,111 @@ static int qusb2_phy_poweron(struct qusb2_phy *qphy)
dev_vdbg(dev, "%s(): Powering-on QUSB2 phy\n", __func__);
+ if (qphy->powered_on)
+ return 0;
+
/* turn on regulator supplies */
ret = regulator_bulk_enable(num, qphy->vregs);
if (ret)
return ret;
- ret = clk_prepare_enable(qphy->iface_clk);
- if (ret) {
- dev_err(dev, "failed to enable iface_clk, %d\n", ret);
- regulator_bulk_disable(num, qphy->vregs);
- return ret;
- }
+ qphy->powered_on = true;
return 0;
}
static int qusb2_phy_poweroff(struct qusb2_phy *qphy)
{
- clk_disable_unprepare(qphy->iface_clk);
+ if (!qphy->powered_on)
+ return 0;
regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+ qphy->powered_on = false;
+
+ return 0;
+}
+
+static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ struct qusb2_phy *qphy = phy_get_drvdata(phy);
+
+ qphy->mode = mode;
+
return 0;
}
+static int __maybe_unused qusb2_phy_runtime_suspend(struct device *dev)
+{
+ struct qusb2_phy *qphy = dev_get_drvdata(dev);
+
+ dev_vdbg(dev, "Suspending QUSB2 Phy, mode:%d\n", qphy->mode);
+
+ if (!qphy->phy_initialized) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ if (!qphy->has_se_clk_scheme)
+ clk_disable_unprepare(qphy->ref_clk);
+
+ clk_disable_unprepare(qphy->cfg_ahb_clk);
+ clk_disable_unprepare(qphy->iface_clk);
+
+ if (qphy->mode == PHY_MODE_INVALID)
+ qusb2_phy_poweroff(qphy);
+
+ return 0;
+}
+
+static int __maybe_unused qusb2_phy_runtime_resume(struct device *dev)
+{
+ struct qusb2_phy *qphy = dev_get_drvdata(dev);
+ int ret;
+
+ dev_vdbg(dev, "Resuming QUSB2 phy, mode:%d\n", qphy->mode);
+
+ if (!qphy->phy_initialized) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ ret = qusb2_phy_poweron(qphy);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(qphy->iface_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable iface_clk, %d\n", ret);
+ goto poweroff_phy;
+ }
+
+ ret = clk_prepare_enable(qphy->cfg_ahb_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable cfg ahb clock, %d\n", ret);
+ goto disable_iface_clk;
+ }
+
+ if (!qphy->has_se_clk_scheme) {
+ clk_prepare_enable(qphy->ref_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable ref clk, %d\n", ret);
+ goto disable_ahb_clk;
+ }
+ }
+
+ return 0;
+
+disable_ahb_clk:
+ clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+ clk_disable_unprepare(qphy->iface_clk);
+poweroff_phy:
+ qusb2_phy_poweroff(qphy);
+
+ return ret;
+}
+
static int qusb2_phy_init(struct phy *phy)
{
struct qusb2_phy *qphy = phy_get_drvdata(phy);
@@ -240,11 +324,17 @@ static int qusb2_phy_init(struct phy *phy)
if (ret)
return ret;
+ ret = clk_prepare_enable(qphy->iface_clk);
+ if (ret) {
+ dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
+ goto poweroff_phy;
+ }
+
/* enable ahb interface clock to program phy */
ret = clk_prepare_enable(qphy->cfg_ahb_clk);
if (ret) {
dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
- goto poweroff_phy;
+ goto disable_iface_clk;
}
/* Perform phy reset */
@@ -336,6 +426,7 @@ static int qusb2_phy_init(struct phy *phy)
ret = -EBUSY;
goto disable_ref_clk;
}
+ qphy->phy_initialized = true;
return 0;
@@ -346,6 +437,8 @@ static int qusb2_phy_init(struct phy *phy)
reset_control_assert(qphy->phy_reset);
disable_ahb_clk:
clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+ clk_disable_unprepare(qphy->iface_clk);
poweroff_phy:
qusb2_phy_poweroff(qphy);
@@ -366,15 +459,19 @@ static int qusb2_phy_exit(struct phy *phy)
reset_control_assert(qphy->phy_reset);
clk_disable_unprepare(qphy->cfg_ahb_clk);
+ clk_disable_unprepare(qphy->iface_clk);
qusb2_phy_poweroff(qphy);
+ qphy->phy_initialized = false;
+
return 0;
}
static const struct phy_ops qusb2_phy_gen_ops = {
.init = qusb2_phy_init,
.exit = qusb2_phy_exit,
+ .set_mode = qusb2_phy_set_mode,
.owner = THIS_MODULE,
};
@@ -387,6 +484,11 @@ static int qusb2_phy_exit(struct phy *phy)
};
MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table);
+static const struct dev_pm_ops qusb2_phy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qusb2_phy_runtime_suspend,
+ qusb2_phy_runtime_resume, NULL)
+};
+
static int qusb2_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -464,11 +566,14 @@ static int qusb2_phy_probe(struct platform_device *pdev)
qphy->cell = NULL;
dev_dbg(dev, "failed to lookup tune2 hstx trim value\n");
}
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
dev_err(dev, "failed to create phy, %d\n", ret);
+ pm_runtime_disable(dev);
return ret;
}
qphy->phy = generic_phy;
@@ -479,6 +584,8 @@ static int qusb2_phy_probe(struct platform_device *pdev)
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (!IS_ERR(phy_provider))
dev_info(dev, "Registered Qcom-QUSB2 phy\n");
+ else
+ pm_runtime_disable(dev);
return PTR_ERR_OR_ZERO(phy_provider);
}
@@ -487,6 +594,7 @@ static int qusb2_phy_probe(struct platform_device *pdev)
.probe = qusb2_phy_probe,
.driver = {
.name = "qcom-qusb2-phy",
+ .pm = &qusb2_phy_pm_ops,
.of_match_table = qusb2_phy_of_match_table,
},
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project