Re: [PATCH v5 0/3] TPS68470 PMIC drivers
From: Andy Shevchenko
Date: Sat Jul 22 2017 - 13:15:47 EST
On Fri, Jul 21, 2017 at 11:51 PM, Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:
> On Friday, July 21, 2017 06:20:15 PM Andy Shevchenko wrote:
>> On Fri, Jul 21, 2017 at 5:46 PM, Rajmohan Mani <rajmohan.mani@xxxxxxxxx> wrote:
>> > This is the patch series for TPS68470 PMIC that works as a camera PMIC.
>> >
>> > The patch series provide the following 3 drivers, to help configure the voltage regulators, clocks and GPIOs provided by the TPS68470 PMIC, to be able to use the camera sensors connected to this PMIC.
>> >
>> > TPS68470 MFD driver:
>> > This is the multi function driver that initializes the TPS68470 PMIC and supports the GPIO and Op Region functions.
>> >
>> > TPS68470 GPIO driver:
>> > This is the PMIC GPIO driver that will be used by the OS GPIO layer, when the BIOS / firmware triggered GPIO access is done.
>> >
>> > TPS68470 Op Region driver:
>> > This is the driver that will be invoked, when the BIOS / firmware configures the voltage / clock for the sensors / vcm devices connected to the PMIC.
>> >
>>
>> All three patches are good to me (we did few rounds of internal review
>> before posting v4)
>>
>> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
>
> OK, so how should they be routed?
Good question. I don't know how last time PMIC drivers were merged,
here I think is just sane to route vi MFD with immutable branch
created.
--
With Best Regards,
Andy Shevchenko