çå: [PATCH v5] mmc: dw_mmc-k3: add sd support for hi3660

From: liwei (CM)
Date: Mon Jul 24 2017 - 07:59:48 EST

Hi,all

Sorry to bother you, could you spare some time to help review patch v6 that I sended. Would you please give us your opinion?

Thnak you very much.


-----éäåä-----
åää: liwei (CM)
åéæé: 2017å7æ6æ 15:03
æää: 'Guodong Xu'; Jaehoon Chung
æé: Ulf Hansson; adrian.hunter@xxxxxxxxx; Shawn Lin; wsa+renesas@xxxxxxxxxxxxxxxxxxxx; hkallweit1@xxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
äé: çå: [PATCH v5] mmc: dw_mmc-k3: add sd support for hi3660

Hi, Jaehoon
Thank you for your advice during your busy schedule, 1."Need the patch for adding "hi3660-dw-mshc" compatible Documentation/devicetree/bindings/k3-dw-mshc.txt"
This "hi3660-dw-mshc" compatible string has been integrated into platform maintainer's tree together with dts changes. It's now in linux-next [1]ïneed this one more?

2. And added the minor comments.
Iwill fix them in patch v6.

Thank you very much.


-----éäåä-----
åää: Guodong Xu [mailto:guodong.xu@xxxxxxxxxx]
åéæé: 2017å7æ6æ 14:45
æää: Jaehoon Chung; liwei (CM)
æé: Ulf Hansson; adrian.hunter@xxxxxxxxx; Shawn Lin; wsa+renesas@xxxxxxxxxxxxxxxxxxxx; hkallweit1@xxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
äé: Re: [PATCH v5] mmc: dw_mmc-k3: add sd support for hi3660

On Thu, Jul 6, 2017 at 1:13 PM, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
> Hi,
>
> To Guodong, if you can forward this to Li Wei, plz do it. Sorry.
>

Sure. Put Li Wei in cc.
And add my response.

> On 07/03/2017 10:06 AM, liwei wrote:
>>
>> Add sd card support for hi3660 soc
>
> Need the patch for adding "hi3660-dw-mshc" compatible
> Documentation/devicetree/bindings/k3-dw-mshc.txt
>
> And added the minor comments.
>

Hi, Jaehoo,

This "hi3660-dw-mshc" compatible string has been integrated into platform maintainer's tree together with dts changes. It's now in linux-next [1], and in Linus' master branch [2], will be in mainline v4.13-rc's.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/log/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt?h=next-20170706
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt

-Guodong

>>
>> Major changes in v3:
>> - solve review comments from Heiner Kallweit.
>> *use the GENMASK and FIELD_PREP macros replace the bit shift operation.
>> *use usleep_range() replace udelay() and mdelay().
>>
>> Major changes in v4:
>> - solve review comments from Jaehoon Chung.
>> *move common register for dwmmc controller to dwmmc header file.
>> *modify definitions type of some register variables.
>> *get rid of the magic numbers.
>>
>> Major changes in v5:
>> - further improve coding style.
>> ---
>> drivers/mmc/host/dw_mmc-k3.c | 315 +++++++++++++++++++++++++++++++++++++++++++
>> drivers/mmc/host/dw_mmc.h | 2 +
>> 2 files changed, 317 insertions(+)
>>
>> diff --git a/drivers/mmc/host/dw_mmc-k3.c
>> b/drivers/mmc/host/dw_mmc-k3.c index e38fb0020bb1..a28eb8c7da82
>> 100644
>> --- a/drivers/mmc/host/dw_mmc-k3.c
>> +++ b/drivers/mmc/host/dw_mmc-k3.c
>> @@ -8,6 +8,8 @@
>> * (at your option) any later version.
>> */
>>
>> +#include <linux/bitops.h>
>> +#include <linux/bitfield.h>
>> #include <linux/clk.h>
>> #include <linux/mfd/syscon.h>
>> #include <linux/mmc/host.h>
>> @@ -28,7 +30,38 @@
>> #define AO_SCTRL_SEL18 BIT(10)
>> #define AO_SCTRL_CTRL3 0x40C
>>
>> +#define DWMMC_SDIO_ID 2
>> +
>> +#define SOC_SCTRL_SCPERCTRL5 (0x314)
>> +#define SDCARD_IO_SEL18 BIT(2)
>> +
>> +#define SDCARD_RD_THRESHOLD (512)
>> +
>> +#define GENCLK_DIV (7)
>> +
>> +#define GPIO_CLK_ENABLE BIT(16)
>> +#define GPIO_CLK_DIV_MASK GENMASK(11, 8)
>> +#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13)
>> +#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16)
>> +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21)
>> +#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26)
>> +
>> +#define TIMING_MODE 3
>> +#define TIMING_CFG_NUM 10
>> +
>> +#define PULL_DOWN BIT(1)
>> +#define PULL_UP BIT(0)
>> +
>> +#define NUM_PHASES (40)
>> +
>> +#define ENABLE_SHIFT_MIN_SMPL (4)
>> +#define ENABLE_SHIFT_MAX_SMPL (12)
>> +#define USE_DLY_MIN_SMPL (11)
>> +#define USE_DLY_MAX_SMPL (14)
>> +
>> struct k3_priv {
>> + int ctrl_id;
>> + u32 cur_speed;
>> struct regmap *reg;
>> };
>>
>> @@ -38,6 +71,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
>> 0
>> };
>>
>> +struct hs_timing {
>> + u32 drv_phase;
>> + u32 smpl_dly;
>> + u32 smpl_phase_max;
>> + u32 smpl_phase_min;
>> +};
>> +
>> +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
>> + { /* reserved */ },
>> + { /* SD */
>> + {7, 0, 15, 15,}, /* 0: LEGACY 400k */
>> + {6, 0, 4, 4,}, /* 1: MMC_HS */
>> + {6, 0, 3, 3,}, /* 2: SD_HS */
>> + {6, 0, 15, 15,}, /* 3: SDR12 */
>> + {6, 0, 2, 2,}, /* 4: SDR25 */
>> + {4, 0, 11, 0,}, /* 5: SDR50 */
>> + {6, 4, 15, 0,}, /* 6: SDR104 */
>> + {0}, /* 7: DDR50 */
>> + {0}, /* 8: DDR52 */
>> + {0}, /* 9: HS200 */
>> + },
>> + { /* SDIO */
>> + {7, 0, 15, 15,}, /* 0: LEGACY 400k */
>> + {0}, /* 1: MMC_HS */
>> + {6, 0, 15, 15,}, /* 2: SD_HS */
>> + {6, 0, 15, 15,}, /* 3: SDR12 */
>> + {6, 0, 0, 0,}, /* 4: SDR25 */
>> + {4, 0, 12, 0,}, /* 5: SDR50 */
>> + {5, 4, 15, 0,}, /* 6: SDR104 */
>> + {0}, /* 7: DDR50 */
>> + {0}, /* 8: DDR52 */
>> + {0}, /* 9: HS200 */
>> + }
>> +};
>> +
>> static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios
>> *ios) {
>> int ret;
>> @@ -66,6 +134,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
>> if (IS_ERR(priv->reg))
>> priv->reg = NULL;
>>
>> + priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
>> + if (priv->ctrl_id < 0)
>> + priv->ctrl_id = 0;
>> +
>> host->priv = priv;
>> return 0;
>> }
>> @@ -144,7 +216,245 @@ static const struct dw_mci_drv_data hi6220_data = {
>> .execute_tuning = dw_mci_hi6220_execute_tuning,
>> };
>>
>> +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing,
>> + int smpl_phase) {
>> + u32 drv_phase;
>> + u32 smpl_dly;
>> + u32 use_smpl_dly = 0;
>> + u32 enable_shift = 0;
>> + u32 reg_value;
>> + int ctrl_id;
>> + struct k3_priv *priv;
>> +
>> + priv = host->priv;
>> + ctrl_id = priv->ctrl_id;
>> +
>> + drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
>> + smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly;
>> + if (smpl_phase == -1)
>> + smpl_phase =
>> + (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
>> +
>> + hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
>> +
>> + switch (timing) {
>> + case MMC_TIMING_UHS_SDR104:
>> + if (smpl_phase >= USE_DLY_MIN_SMPL &&
>> + smpl_phase <= USE_DLY_MAX_SMPL)
>> + use_smpl_dly = 1;
>> + /* fallthrough */
>> + case MMC_TIMING_UHS_SDR50:
>> + if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
>> + smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
>> + enable_shift = 1;
>> + break;
>> + }
>> +
>> + mci_writel(host, GPIO, 0x0);
>> + usleep_range(5, 10);
>> +
>> + reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |
>> + FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) |
>> + FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase);
>> + mci_writel(host, UHS_REG_EXT, reg_value);
>> +
>> + mci_writel(host, ENABLE_SHIFT, enable_shift);
>> +
>> + reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |
>> + FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly);
>> + mci_writel(host, GPIO, (unsigned int)reg_value |
>> + GPIO_CLK_ENABLE);
>> +
>> + /* We should delay 1ms wait for timing setting finished. */
>> + usleep_range(1000, 2000);
>> +}
>> +
>> +static int dw_mci_hi3660_init(struct dw_mci *host) {
>> + mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
>> + SDMMC_CARD_RD_THR_EN));
>> +
>> + dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
>> + host->bus_hz /= (GENCLK_DIV + 1);
>> +
>> + return 0;
>> +}
>> +
>> +static int dw_mci_set_sel18(struct dw_mci *host, bool set) {
>> + int ret;
>> + unsigned int val;
>> + struct k3_priv *priv;
>> +
>> + priv = host->priv;
>> +
>> + val = set ? SDCARD_IO_SEL18 : 0;
>> + ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
>> + SDCARD_IO_SEL18, val);
>> + if (ret) {
>> + dev_err(host->dev, "sel18 %u error\n", val);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
>
> static?
>
>> +{
>> + int ret;
>> + unsigned long wanted;
>> + unsigned long actual;
>> + struct k3_priv *priv = host->priv;
>> +
>> + if (!ios->clock || ios->clock == priv->cur_speed)
>> + return;
>> +
>> + wanted = ios->clock * (GENCLK_DIV + 1);
>> + ret = clk_set_rate(host->ciu_clk, wanted);
>> + if (ret) {
>> + dev_err(host->dev, "failed to set rate %luHz\n", wanted);
>> + return;
>> + }
>> + actual = clk_get_rate(host->ciu_clk);
>> +
>> + dw_mci_hs_set_timing(host, ios->timing, -1);
>> + host->bus_hz = actual / (GENCLK_DIV + 1);
>> + host->current_speed = 0;
>> + priv->cur_speed = host->bus_hz; }
>> +
>> +static int dw_mci_get_best_clksmpl(unsigned int sample_flag) {
>> + int i;
>> + int interval;
>> + unsigned int v;
>> + unsigned int len;
>> + unsigned int range_start = 0;
>> + unsigned int range_length = 0;
>> + unsigned int middle_range = 0;
>> +
>> + if (!sample_flag)
>> + return -EIO;
>> +
>> + if (~sample_flag == 0)
>> + return 0;
>> +
>> + i = ffs(sample_flag) - 1;
>> +
>> + /*A clock cycle is divided into 32 phases,
>> + *each of which is represented by a bit,
>> + *finding the optimal phase.
>> + */
>
> Fix the comment style.
>
>> + while (i < 32) {
>> + v = ror32(sample_flag, i);
>> + len = ffs(~v) - 1;
>> +
>> + if (len > range_length) {
>> + range_length = len;
>> + range_start = i;
>> + }
>> +
>> + interval = ffs(v >> len) - 1;
>> + if (interval < 0)
>> + break;
>> +
>> + i += len + interval;
>> + }
>> +
>> + middle_range = range_start + range_length / 2;
>> + if (middle_range >= 32)
>> + middle_range %= 32;
>> +
>> + return middle_range;
>> +}
>> +
>> +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot,
>> +u32 opcode) {
>> + int i = 0;
>> + struct dw_mci *host = slot->host;
>> + struct mmc_host *mmc = slot->mmc;
>> + int smpl_phase = 0;
>> + u32 tuning_sample_flag = 0;
>> + int best_clksmpl = 0;
>> +
>> + for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
>> + smpl_phase %= 32;
>> +
>> + mci_writel(host, TMOUT, ~0);
>> + dw_mci_hs_set_timing(host, mmc->ios.timing,
>> + smpl_phase);
>> +
>> + if (!mmc_send_tuning(mmc, opcode, NULL))
>> + tuning_sample_flag |= (1 << smpl_phase);
>> + else
>> + tuning_sample_flag &= ~(1 << smpl_phase);
>> + }
>> +
>> + best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
>> + if (best_clksmpl < 0) {
>> + dev_err(host->dev, "All phases bad!\n");
>> + return -EIO;
>> + }
>> +
>> + dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
>> +
>> + dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
>> + best_clksmpl, tuning_sample_flag);
>> + return 0;
>> +}
>> +
>> +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
>> + struct mmc_ios *ios) {
>> + int ret;
>> + int min_uv = 0;
>> + int max_uv = 0;
>> + struct dw_mci_slot *slot = mmc_priv(mmc);
>> + struct k3_priv *priv;
>> + struct dw_mci *host;
>> +
>> + host = slot->host;
>> + priv = host->priv;
>> +
>> + if (!priv || !priv->reg)
>> + return 0;
>> +
>> + if (priv->ctrl_id == DWMMC_SDIO_ID)
>> + return 0;
>> +
>> + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
>> + ret = dw_mci_set_sel18(host, 0);
>> + if (ret)
>> + return ret;
>> + min_uv = 2950000;
>> + max_uv = 2950000;
>> + } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
>> + ret = dw_mci_set_sel18(host, 1);
>> + if (ret)
>> + return ret;
>> + min_uv = 1800000;
>> + max_uv = 1800000;
>> + }
>> +
>> + if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
>> + return 0;
>> +
>> + ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
>> + if (ret) {
>> + dev_err(host->dev, "Regulator set error %d: %d - %d\n",
>> + ret, min_uv, max_uv);
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static const struct dw_mci_drv_data hi3660_data = {
>> + .init = dw_mci_hi3660_init,
>> + .set_ios = dw_mci_hi3660_set_ios,
>> + .parse_dt = dw_mci_hi6220_parse_dt,
>> + .execute_tuning = dw_mci_hi3660_execute_tuning,
>> + .switch_voltage = dw_mci_hi3660_switch_voltage, };
>> +
>> static const struct of_device_id dw_mci_k3_match[] = {
>> + { .compatible = "hisilicon,hi3660-dw-mshc", .data =
>> + &hi3660_data, },
>> { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
>> { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
>> {},
>> @@ -155,6 +465,11 @@ static int dw_mci_k3_probe(struct
>> platform_device *pdev) {
>> const struct dw_mci_drv_data *drv_data;
>> const struct of_device_id *match;
>> + struct reset_control *rst;
>> +
>> + rst = devm_reset_control_get(&pdev->dev, NULL);
>> + if (!IS_ERR(rst))
>> + reset_control_reset(rst);
>>
>> match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
>> drv_data = match->data;
>> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
>> index ce347361f3dc..7cdcafda8eec 100644
>> --- a/drivers/mmc/host/dw_mmc.h
>> +++ b/drivers/mmc/host/dw_mmc.h
>> @@ -319,6 +319,8 @@ struct dw_mci_board {
>> #define SDMMC_DSCADDR 0x094
>> #define SDMMC_BUFADDR 0x098
>> #define SDMMC_CDTHRCTL 0x100
>> +#define SDMMC_UHS_REG_EXT 0x108
>> +#define SDMMC_ENABLE_SHIFT 0x110
>> #define SDMMC_DATA(x) (x)
>> /*
>> * Registers to support idmac 64-bit address mode
>>
>